Export limit exceeded: 378623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378623 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-59893 | 2026-08-17 | 7.5 High | ||
| sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, SQL_REGEX in sqlparse/keywords.py and the per-position loop in sqlparse/lexer.py repeatedly scan unmatched dollar-quoted literal and multiline-comment delimiters, causing quadratic CPU consumption through sqlparse.parse(), sqlparse.format(), and sqlparse.split(). This issue is fixed in version 0.6.0. | ||||
| CVE-2026-71979 | 2026-08-17 | 7.5 High | ||
| INDI (Instrument Neutral Distributed Interface) indiserver through 2.2.4.2, fixed in commit 96bbd7f, contains a stack buffer overflow vulnerability that allows unauthenticated remote attackers to crash the daemon by sending malformed XML with mismatched tags whose names exceed 1024 bytes. Attackers can send a single TCP packet on port 7624 with mismatched XML tags to trigger an unbounded sprintf() write into a fixed 1024-byte stack buffer in MsgQueue.cpp, terminating the daemon and disrupting all active client and driver sessions. | ||||
| CVE-2026-10673 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 8.3 High |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. | ||||
| CVE-2026-11923 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-08-17 | 7.4 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 Reverse Proxy in certain configurations may provide weaker than expected cryptographic validation of user supplied data. | ||||
| CVE-2026-13365 | 1 Ibm | 2 Planning Analytics, Planning Analytics Local | 2026-08-17 | 7.1 High |
| IBM Planning Analytics 2.0, and 2.1 Local is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. | ||||
| CVE-2026-18499 | 1 Ibm | 2 Websphere Application Server, Websphere Application Server Liberty | 2026-08-17 | 8.1 High |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is vulnerable to a privilege escalation when using Liberty collectives. | ||||
| CVE-2026-51346 | 2026-08-17 | N/A | ||
| SQL Injection vulnerability in StudIP 6.0.x before 6.0.3 and 5.4.x before 5.4.12 allows a remote attacker to execute arbitrary code and obtain sensitive information via the store() functions. | ||||
| CVE-2026-13460 | 2 Ibm, Linux | 2 Storage Scale, Linux Kernel | 2026-08-17 | 7.5 High |
| IBM Storage Scale 5.2.3.0 through 5.2.3.8, and 6.0.0.0 through 6.0.1.0 GUI contains a hardcoded token in the source code, which was used for inter-node cluster communication and REST API authentication between GUI. | ||||
| CVE-2026-53410 | 2 Zoom, Zoom Communications | 5 Remote Control For Zoom Contact Center, Rooms, Workplace Desktop and 2 more | 2026-08-17 | 7 High |
| A time-of-check to time-of-use (TOCTOU) race condition in the installation and uninstallation process of certain Zoom Clients for Windows could allow an authenticated local user to escalate privileges. | ||||
| CVE-2026-72170 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p: skip nlink update in cacheless mode to fix WARN_ON v9fs_dec_count() unconditionally calls drop_nlink() on regular files, even when the inode's nlink is already zero. In cacheless mode the client refetches inode metadata from the server (the source of truth) on every operation, so by the time v9fs_remove() returns, the locally cached nlink may already reflect the post-unlink value: 1. Client initiates unlink, server processes it and sets nlink to 0 2. Client refetches inode metadata (nlink=0) before unlink returns 3. Client's v9fs_remove() completes successfully 4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0 This race is easily triggered under heavy unlink workloads, such as stress-ng's unlink stressor, producing the following warning: WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8 Call trace: drop_nlink+0x4c/0xc8 v9fs_remove+0x1e0/0x250 [9p] v9fs_vfs_unlink+0x20/0x38 [9p] vfs_unlink+0x13c/0x258 ... In cacheless mode the server is authoritative and the inode is on its way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count() entirely when neither CACHE_META nor CACHE_LOOSE is set, which both avoids the warning and removes a class of nlink races (two concurrent unlinkers observing nlink > 0 and both calling drop_nlink()) that an nlink == 0 guard alone would only narrow rather than close. | ||||
| CVE-2026-72175 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race Patch series "userfaultfd/pagemap: pre-existing fixes". These are pre-existing bug fixes that were carried at the front of the userfaultfd RWP working-set-tracking series up to v5 [1]. Per review feedback that fixes should not sit in the middle of a feature series, they are split out and sent on their own; the RWP series is reposted rebased on top of this. All six were flagged by the Sashiko AI review of the RWP series and carry independent of RWP, apply to mm-new directly, and carry Cc: stable@. 1: fs/proc/task_mmu: a missing huge_ptep_modify_prot_start() in make_uffd_wp_huge_pte() can lose hardware Dirty/Accessed updates when PAGEMAP_SCAN write-protects a hugetlb PTE. 2: fs/proc/task_mmu: pagemap_scan_hugetlb_entry() compares the range against HPAGE_SIZE rather than the hstate page size, so it never write-protects gigantic hugetlb pages. 3: fs/proc/task_mmu: PAGEMAP_SCAN with PM_SCAN_WP_MATCHING over an unpopulated hugetlb range self-deadlocks -- pagemap_scan_pte_hole() calls uffd_wp_range() while walk_hugetlb_range() holds the hugetlb vma lock for read, and hugetlb_change_protection() then takes it for write. Install the marker inline instead. 4: mm/huge_memory: change_non_present_huge_pmd() drops pmd_swp_uffd_wp on a device-private PMD permission downgrade, silently losing the uffd-wp marker. 5: userfaultfd: must_wait() applies pte_write() to a locklessly read PTE without checking pte_present(), so swap/migration entries decode random offset bits and a thread can stay parked on a stale fault. 6: userfaultfd: __VMA_UFFD_FLAGS feeds VMA_UFFD_MINOR_BIT (41) to mk_vma_flags() unconditionally, an out-of-bounds write into the single-word vma_flags_t on 32-bit. Build the mask from config-gated per-mode masks so an unavailable bit is never materialised. This patch (of 6): make_uffd_wp_huge_pte() arms the UFFD_WP bit on a present HugeTLB PTE by calling huge_ptep_modify_prot_commit() with a ptent snapshot that was fetched without the corresponding huge_ptep_modify_prot_start(). The start helper is what atomically clears the entry so the kernel-owned snapshot stays consistent until the commit; without it, the hardware may set Dirty or Accessed in the live PTE between the original read and the commit, and huge_ptep_modify_prot_commit() (whose generic implementation just calls set_huge_pte_at()) then writes the stale snapshot back over the live hardware bits, losing the update. The non-hugetlb sibling make_uffd_wp_pte() does this correctly via ptep_modify_prot_start() / ptep_modify_prot_commit(). Mirror that pattern for the present-PTE branch. The migration case stays as-is -- migration entries are non-present, so there's no hardware update to race against. | ||||
| CVE-2026-72191 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: validate split-point offset in indx_insert_into_buffer indx_insert_into_buffer() computes used = used1 - to_copy - sp_size; memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off)); where sp and sp_size come from hdr_find_split(). hdr_find_split() walks entries by le16_to_cpu(e->size) without validating that each step stays within hdr->used or that the size field is at least sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper, only validates header-level fields (used, total, de_off) and does not walk per-entry sizes. A crafted NTFS image whose leaf INDEX_HDR reports used == total but contains one interior NTFS_DE with size = 0xFFF0 therefore passes validation, descends to indx_insert_into_buffer() through the ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split() return an sp whose sp_size (0xFFF0) greatly exceeds the remaining bytes in the buffer. The u32 subtraction underflows and the memmove count becomes a near-4-GiB value, producing an out-of-bounds kernel write that corrupts adjacent allocations and panics the kernel. Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a single 'touch' inside the mounted directory; crash site resolves to fs/ntfs3/index.c at the memmove. Trigger requires only local mount of an attacker-supplied filesystem image (USB, loopback, or removable media auto-mount). Reject the split whenever the chosen sp plus its declared size already extends past hdr1->used. This is the minimal fix; it preserves the existing hdr_find_split() contract and relies on the same out: cleanup path as the pre-existing error returns. A prior OOB read in the very same indx_insert_into_buffer() memmove was fixed in commit b8c44949044e ("fs/ntfs3: Fix OOB read in indx_insert_into_buffer") by tightening hdr_find_e(), but that fix does not cover the split-point size field path addressed here: sp is returned by hdr_find_split(), not hdr_find_e(), and the underflow is driven by sp->size rather than hdr->used exceeding hdr->total. | ||||
| CVE-2026-72192 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: bound to_move in indx_insert_into_root before hdr_insert_head indx_insert_into_root() promotes a full resident $INDEX_ROOT into $INDEX_ALLOCATION and copies all non-last resident root entries into a newly allocated INDEX_BUFFER via hdr_insert_head(). The source byte count 'to_move' is summed from the on-disk resident entry sizes and is independent of the destination buffer size, which comes from root->index_block_size (via indx->index_bits). A crafted NTFS image that keeps a valid, full resident root but shrinks root->index_block_size down to 512 after the root has been populated makes hdr_insert_head() memcpy attacker-controlled resident entry bytes past the end of the kmalloc(1u << indx->index_bits) allocation returned by indx_new(). For a 512-byte destination and a resident root whose non-last entries total 560 bytes, the memcpy overruns by 120 bytes and a following memmove extends the highest written offset to 136 bytes past the allocation. The overflow bytes are a direct copy of on-disk entries (via kmemdup), so they are fully attacker-controlled. The write is reachable from unprivileged open(O_CREAT) on a mounted crafted NTFS image: a single sufficiently long create in a directory whose resident root is already full forces root promotion and triggers the copy. This is a controlled out-of-bounds write of 120-136 bytes past a kmalloc(index_block_size) allocation, with attacker-controlled content. It is a bounded adjacent-heap corruption primitive; it is not an arbitrary-address write. Successful exploitation into a named victim object depends on the surrounding slab layout. Reject the copy at the sink. The destination's INDEX_HDR already reports hdr_total (the payload capacity of the new buffer) and hdr_used (the bytes already consumed by the terminal END entry installed by indx_new()); require that to_move fits in the remaining payload before calling hdr_insert_head(). On mismatch, fail with -EINVAL and mark the filesystem as having a detected on-disk inconsistency, which is the same behaviour as the surrounding validation in this function. | ||||
| CVE-2026-72196 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass In log_replay()'s analysis pass, after find_dp() returns a valid DIR_PAGE_ENTRY for the (target_attr, target_vcn) tuple, the copy_lcns block walks lrh->lcns_follow further entries: t16 = le16_to_cpu(lrh->lcns_follow); for (i = 0; i < t16; i++) { size_t j = (size_t)(le64_to_cpu(lrh->target_vcn) - le64_to_cpu(dp->vcn)); dp->page_lcns[j + i] = lrh->page_lcns[i]; } find_dp() only validates that target_vcn falls within [dp->vcn, dp->vcn + dp->lcns_follow), i.e., that the FIRST cluster is covered. The walk through the further entries is not bounded against dp->lcns_follow. For a malformed LRH where target_vcn = dp->vcn + dp->lcns_follow - 1 and lrh->lcns_follow > 1, the i > 0 writes overflow the dp's allocated page_lcns[] array. Add the missing j + lrh->lcns_follow <= dp->lcns_follow guard. Reproduced under UML+KASAN on mainline 8d90b09e6741 as a slab-out-of-bounds write of size 8 from log_replay+0x68d4 on the mount path. This is distinct from Pavitra Jha's 2026-05-02 patch ("fs/ntfs3: validate lcns_follow in log_replay conversion", <20260502154252.164586-1-jhapavitra98@gmail.com>) which addresses the separate version-0 dirty-page-table conversion path's memmove(&dp->vcn, ...) call. The two fixes are complementary; both should land. [almaz.alexandrovich@paragon-software.com: clang-formatted the changes, fixed conflicts] | ||||
| CVE-2026-72287 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Move vTPR vs. TPR Threshold consistency check into "normal" checks Move the off-by-default consistency check for vmcs12.tpr_threshold vs. the virtual APIC vTPR into the "normal" controls checks, as waiting until KVM has loaded some amount of state is unnecessary and actively dangerous. Specifically, failure to unwind vmcs01.GUEST_CR3 to KVM's value when EPT is disabled results in KVM running L1 with an L1-controlled CR3, not with KVM's CR3! Alternatively, KVM could simply reset the MMU to force a reload of vmcs01.GUEST_CR3, but the _only_ reason the check was shoved into a "late" flow was to wait until the vmcs12 pages were retrieved. Rather than build up more crusty code, simply access vTPR using a regular guest memory access (performance isn't a concern). To circumvent the restrictions that led to KVM deferring nested_get_vmcs12_pages(), (a) use a VM-scoped API to read guest memory so that it always hits non-SMM memslots (for RSM), and (b) skip the check (since its off-by-default anyways) when the vCPU doesn't want to run, i.e. when userspace is restoring/stuffing state. If reading guest memory fails, simply skip the consistency check, as KVM's de facto ABI is that VMX instruction accesses to non-existent memory get PCI Bus Error semantics, where reads return 0xFFs. And if vTPR=0xFF, then the vTPR is guaranteed to be greater than or equal to TPR_THRESHOLD. | ||||
| CVE-2026-72350 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. | ||||
| CVE-2026-72353 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in fallocate ntfs_attr_fallocate() allocates holes and delayed allocations inside initialized size by looking up the current runlist element under ni->runlist.lock. The returned struct runlist_element is only a borrowed pointer into ni->runlist.rl. A writer can replace and free that array after the read lock is dropped, so later reads of rl->lcn, rl->length and rl->vcn can touch freed memory. The buggy scenario involves two paths, with each column showing the order within that path: ntfs_attr_fallocate(): 1. Take ni->runlist.lock for read. 2. Get rl from ntfs_attr_find_vcn_nolock(). 3. Drop ni->runlist.lock. 4. Read rl->lcn, rl->length and rl->vcn. mmap page_mkwrite: 1. Enter ntfs_filemap_page_mkwrite(). 2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster(). 3. Merge allocation state with ntfs_runlists_merge(). 4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_attr_fallocate+0xbb8/0xd00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_attr_fallocate+0xbb8/0xd00 kasan_report+0xe0/0x110 ? ntfs_attr_fallocate+0xbb8/0xd00 ntfs_attr_fallocate+0xbb8/0xd00 ? lock_acquire+0x2b8/0x2f0 ? __pfx_ntfs_attr_fallocate+0x10/0x10 ? 0xffffffffc0000095 ? down_write+0x10d/0x1e0 ntfs_fallocate+0x5c9/0x1d00 ? __pfx_ntfs_fallocate+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? selinux_file_permission+0x3a7/0x510 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 ? do_syscall_64+0x81/0x6a0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 410: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3f/0x110 ntfs_runlists_merge+0xaa3/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 ntfs_attr_fallocate+0x53f/0xd00 ntfs_fallocate+0x5c9/0x1d00 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 424: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x307/0x580 ntfs_rl_realloc+0x6f/0x110 ntfs_runlists_merge+0x7b1/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 __ntfs_write_iomap_begin+0x8cd/0x2280 iomap_iter+0x6de/0x11e0 iomap_page_mkwrite+0x391/0x650 ntfs_filemap_page_mkwrite+0x1ac/0x400 do_page_mkwrite+0x15c/0x280 __handle_mm_fault+0xd6d/0x1ca0 handle_mm_fault+0x19c/0x470 do_user_addr_fault+0x23b/0x9c0 exc_page_fault+0x5c/0xc0 asm_exc_page_fault+0x26/0x30 Fix this by copying the needed runlist fields while the read lock is still held and using only those scalar snapshots after unlocking. After the snapshot, ntfs_attr_map_cluster() can also find that the range is already mapped and return balloc=false. Only call ntfs_dio_zero_range() when new clusters were allocated, matching the write iomap path and preserving the zero-newly-allocated-holes behavior. | ||||
| CVE-2026-72357 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline In the unregister path we use __in_uprobe_trampoline check with current->mm for the VMA lookup, which is wrong, because we are in the tracer context, not the traced process. Add mm_struct pointer argument to __in_uprobe_trampoline and changing related callers to pass proper mm_struct pointer. | ||||
| CVE-2026-72397 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the vrm_version configured by the driver, while pmbus_reg2data_vid() already switched on it. Any driver that selects a non-VR11 VID mode and exposes a regulator (or hwmon vout setter) sent dangerously wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the chip interprets as 1080 mV. Mirror pmbus_reg2data_vid() so writes round-trip with reads. | ||||
| CVE-2026-72425 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs() Resetting all VFs causes resource leak on VFs with FDIR filters enabled as CTRL VSIs are only invalidated and not freed. Fix by using ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which aligns behavior with the ice_reset_vf() function. Reproduction: echo 1 > /sys/class/net/$pf/device/sriov_numvfs ethtool -N $vf flow-type ether proto 0x9000 action 0 echo 1 > /sys/class/net/$pf/device/reset | ||||