Export limit exceeded: 376834 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376834 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-22106 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: unregister xdp rxq info in the reset path vmxnet3 does not unregister xdp rxq info in the vmxnet3_reset_work() code path as vmxnet3_rq_destroy() is not invoked in this code path. So, we get below message with a backtrace. Missing unregister, handled but fix driver WARNING: CPU:48 PID: 500 at net/core/xdp.c:182 __xdp_rxq_info_reg+0x93/0xf0 This patch fixes the problem by moving the unregister code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). | ||||
| CVE-2025-62778 | 1 Frappe | 3 Frappe, Frappe Lms, Learning | 2025-11-03 | 5.3 Medium |
| Frappe Learning is a learning management system. A security issue was identified in Frappe Learning 2.39.1 and earlier, where students were able to access the Quiz Form if they had the URL. | ||||
| CVE-2020-10211 | 1 Mitel | 1 Mivoice Connect | 2025-11-03 | 9.8 Critical |
| A remote code execution vulnerability in UCB component of Mitel MiVoice Connect before 19.1 SP1 could allow an unauthenticated remote attacker to execute arbitrary scripts due to insufficient validation of URL parameters. A successful exploit could allow an attacker to gain access to sensitive information. | ||||
| CVE-2025-62779 | 1 Frappe | 3 Frappe, Frappe Lms, Learning | 2025-11-03 | 5.4 Medium |
| Frappe Learning is a learning system that helps users structure their content. In Frappe Learning 2.39.1 and earlier, users were able to add HTML through input fields in the Job Form. | ||||
| CVE-2025-22113 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here. | ||||
| CVE-2025-22112 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix out-of-range access of vnic_info array The bnxt_queue_{start | stop}() access vnic_info as much as allocated, which indicates bp->nr_vnics. So, it should not reach bp->vnic_info[bp->nr_vnics]. | ||||
| CVE-2020-10377 | 1 Mitel | 1 Mivoice Connect Client | 2025-11-03 | 9.8 Critical |
| A weak encryption vulnerability in Mitel MiVoice Connect Client before 214.100.1214.0 could allow an unauthenticated attacker to gain access to user credentials. A successful exploit could allow an attacker to access the system with compromised user credentials. | ||||
| CVE-2025-63622 | 2 Code-projects, Fabian | 2 Online Complaint Site, Online Complaint Site | 2025-11-03 | 9.8 Critical |
| A vulnerability was found in code-projects Online Complaint Site 1.0. This issue affects some unknown processing of the file /cms/admin/subcategory.php. This manipulation of the argument category causes SQL injection. | ||||
| CVE-2023-25599 | 1 Mitel | 1 Mivoice Connect | 2025-11-03 | 7.4 High |
| A vulnerability in the conferencing component of Mitel MiVoice Connect through 19.3 SP2, 22.24.1500.0 could allow an unauthenticated attacker to conduct a reflected cross-site scripting (XSS) attack due to insufficient validation for the test_presenter.php page. A successful exploit could allow an attacker to execute arbitrary scripts. | ||||
| CVE-2025-22120 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: goto right label 'out_mmap_sem' in ext4_setattr() Otherwise, if ext4_inode_attach_jinode() fails, a hung task will happen because filemap_invalidate_unlock() isn't called to unlock mapping->invalidate_lock. Like this: EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory INFO: task fsstress:374 blocked for more than 122 seconds. Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373 task_flags:0x440140 flags:0x00000000 Call Trace: <TASK> __schedule+0x2c9/0x7f0 schedule+0x27/0xa0 schedule_preempt_disabled+0x15/0x30 rwsem_down_read_slowpath+0x278/0x4c0 down_read+0x59/0xb0 page_cache_ra_unbounded+0x65/0x1b0 filemap_get_pages+0x124/0x3e0 filemap_read+0x114/0x3d0 vfs_read+0x297/0x360 ksys_read+0x6c/0xe0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-22122 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix adding folio to bio >4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage is supported, then 'offset' of folio can't be held in 'unsigned int', cause warning in bio_add_folio_nofail() and IO failure. Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't be overflow, and folio can be added to bio successfully. | ||||
| CVE-2025-22123 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid accessing uninitialized curseg syzbot reports a f2fs bug as below: F2FS-fs (loop3): Stopped filesystem due to reason: 7 kworker/u8:7: attempt to access beyond end of device BUG: unable to handle page fault for address: ffffed1604ea3dfa RIP: 0010:get_ckpt_valid_blocks fs/f2fs/segment.h:361 [inline] RIP: 0010:has_curseg_enough_space fs/f2fs/segment.h:570 [inline] RIP: 0010:__get_secs_required fs/f2fs/segment.h:620 [inline] RIP: 0010:has_not_enough_free_secs fs/f2fs/segment.h:633 [inline] RIP: 0010:has_enough_free_secs+0x575/0x1660 fs/f2fs/segment.h:649 <TASK> f2fs_is_checkpoint_ready fs/f2fs/segment.h:671 [inline] f2fs_write_inode+0x425/0x540 fs/f2fs/inode.c:791 write_inode fs/fs-writeback.c:1525 [inline] __writeback_single_inode+0x708/0x10d0 fs/fs-writeback.c:1745 writeback_sb_inodes+0x820/0x1360 fs/fs-writeback.c:1976 wb_writeback+0x413/0xb80 fs/fs-writeback.c:2156 wb_do_writeback fs/fs-writeback.c:2303 [inline] wb_workfn+0x410/0x1080 fs/fs-writeback.c:2343 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Commit 8b10d3653735 ("f2fs: introduce FAULT_NO_SEGMENT") allows to trigger no free segment fault in allocator, then it will update curseg->segno to NULL_SEGNO, though, CP_ERROR_FLAG has been set, f2fs_write_inode() missed to check the flag, and access invalid curseg->segno directly in below call path, then resulting in panic: - f2fs_write_inode - f2fs_is_checkpoint_ready - has_enough_free_secs - has_not_enough_free_secs - __get_secs_required - has_curseg_enough_space - get_ckpt_valid_blocks : access invalid curseg->segno To avoid this issue, let's: - check CP_ERROR_FLAG flag in prior to f2fs_is_checkpoint_ready() in f2fs_write_inode(). - in has_curseg_enough_space(), save curseg->segno into a temp variable, and verify its validation before use. | ||||
| CVE-2025-22127 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadloop in prepare_compress_overwrite() Jan Prusakowski reported a kernel hang issue as below: When running xfstests on linux-next kernel (6.14.0-rc3, 6.12) I encountered a problem in generic/475 test where fsstress process gets blocked in __f2fs_write_data_pages() and the test hangs. The options I used are: MKFS_OPTIONS -- -O compression -O extra_attr -O project_quota -O quota /dev/vdc MOUNT_OPTIONS -- -o acl,user_xattr -o discard,compress_extension=* /dev/vdc /vdc INFO: task kworker/u8:0:11 blocked for more than 122 seconds. Not tainted 6.14.0-rc3-xfstests-lockdep #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:0 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208160 flags:0x00004000 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: <TASK> __schedule+0x309/0x8e0 schedule+0x3a/0x100 schedule_preempt_disabled+0x15/0x30 __mutex_lock+0x59a/0xdb0 __f2fs_write_data_pages+0x3ac/0x400 do_writepages+0xe8/0x290 __writeback_single_inode+0x5c/0x360 writeback_sb_inodes+0x22f/0x570 wb_writeback+0xb0/0x410 wb_do_writeback+0x47/0x2f0 wb_workfn+0x5a/0x1c0 process_one_work+0x223/0x5b0 worker_thread+0x1d5/0x3c0 kthread+0xfd/0x230 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> The root cause is: once generic/475 starts toload error table to dm device, f2fs_prepare_compress_overwrite() will loop reading compressed cluster pages due to IO error, meanwhile it has held .writepages lock, it can block all other writeback tasks. Let's fix this issue w/ below changes: - add f2fs_handle_page_eio() in prepare_compress_overwrite() to detect IO error. - detect cp_error earler in f2fs_read_multi_pages(). | ||||
| CVE-2025-22128 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath12k_pci_msi_alloc(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This may end up with a warning from the IRQ core that is expecting the affinity hint to be cleared before freeing the IRQ: kernel/irq/manage.c: /* make sure affinity_hint is cleaned up */ if (WARN_ON_ONCE(desc->affinity_hint)) desc->affinity_hint = NULL; So to fix this issue, clear the IRQ affinity hint before calling ath12k_pci_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. | ||||
| CVE-2023-25280 | 1 Dlink | 3 Dir-820l, Dir-820l Firmware, Dir820la1 Firmware | 2025-11-03 | 9.8 Critical |
| OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload with the ping_addr parameter to ping.ccp. | ||||
| CVE-2025-62706 | 1 Authlib | 1 Authlib | 2025-11-03 | 6.5 Medium |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.5, Authlib’s JWE zip=DEF path performs unbounded DEFLATE decompression. A very small ciphertext can expand into tens or hundreds of megabytes on decrypt, allowing an attacker who can supply decryptable tokens to exhaust memory and CPU and cause denial of service. This issue has been patched in version 1.6.5. Workarounds for this issue involve rejecting or stripping zip=DEF for inbound JWEs at the application boundary, forking and add a bounded decompression guard via decompressobj().decompress(data, MAX_SIZE)) and returning an error when output exceeds a safe limit, or enforcing strict maximum token sizes and fail fast on oversized inputs; combine with rate limiting. | ||||
| CVE-2025-62171 | 1 Imagemagick | 1 Imagemagick | 2025-11-03 | 5.9 Medium |
| ImageMagick is an open source software suite for displaying, converting, and editing raster image files. In ImageMagick versions prior to 7.1.2-7 and 6.9.13-32, an integer overflow vulnerability exists in the BMP decoder on 32-bit systems. The vulnerability occurs in coders/bmp.c when calculating the extent value by multiplying image columns by bits per pixel. On 32-bit systems with size_t of 4 bytes, a malicious BMP file with specific dimensions can cause this multiplication to overflow and wrap to zero. The overflow check added to address CVE-2025-57803 is placed after the overflow occurs, making it ineffective. A specially crafted 58-byte BMP file with width set to 536,870,912 and 32 bits per pixel can trigger this overflow, causing the bytes_per_line calculation to become zero. This vulnerability only affects 32-bit builds of ImageMagick where default resource limits for width, height, and area have been manually increased beyond their defaults. 64-bit systems with size_t of 8 bytes are not vulnerable, and systems using default ImageMagick resource limits are not vulnerable. The vulnerability is fixed in versions 7.1.2-7 and 6.9.13-32. | ||||
| CVE-2025-61920 | 1 Authlib | 1 Authlib | 2025-11-03 | 7.5 High |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.5, Authlib’s JOSE implementation accepts unbounded JWS/JWT header and signature segments. A remote attacker can craft a token whose base64url‑encoded header or signature spans hundreds of megabytes. During verification, Authlib decodes and parses the full input before it is rejected, driving CPU and memory consumption to hostile levels and enabling denial of service. Version 1.6.5 patches the issue. Some temporary workarounds are available. Enforce input size limits before handing tokens to Authlib and/or use application-level throttling to reduce amplification risk. | ||||
| CVE-2025-5473 | 2 Gimp, Redhat | 7 Gimp, Enterprise Linux, Rhel Aus and 4 more | 2025-11-03 | 8.8 High |
| GIMP ICO File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of ICO files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26752. | ||||
| CVE-2025-59799 | 1 Artifex | 1 Ghostscript | 2025-11-03 | 4.3 Medium |
| Artifex Ghostscript through 10.05.1 has a stack-based buffer overflow in pdfmark_coerce_dest in devices/vector/gdevpdfm.c via a large size value. | ||||