Export limit exceeded: 369608 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (369608 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-36755 | 1 Cleverdisplay | 1 Blueone | 2026-04-15 | N/A |
| The CleverDisplay BlueOne hardware player is designed with its USB interfaces physically enclosed and inaccessible under normal operating conditions. Researchers demonstrated that, after cicumventing the device’s protective enclosure, it was possible to connect a USB keyboard and press ESC during boot to access the BIOS setup interface. BIOS settings could be viewed but not modified. This behavior slightly increases the attack surface by exposing internal system information (CWE-1244) once the enclosure is removed, but does not allow integrity or availability compromise under standard or tested configurations. | ||||
| CVE-2025-39990 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check the helper function is valid in get_helper_proto kernel test robot reported verifier bug [1] where the helper func pointer could be NULL due to disabled config option. As Alexei suggested we could check on that in get_helper_proto directly. Marking tail_call helper func with BPF_PTR_POISON, because it is unused by design. [1] https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com | ||||
| CVE-2025-39991 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load() If ab->fw.m3_data points to data, then fw pointer remains null. Further, if m3_mem is not allocated, then fw is dereferenced to be passed to ath11k_err function. Replace fw->size by m3_len. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-39992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap: check for stable address space before operating on the VMA It is possible to hit a zero entry while traversing the vmas in unuse_mm() called from swapoff path and accessing it causes the OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000446--> Loading the memory from offset 0x40 on the XA_ZERO_ENTRY as address. Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault The issue is manifested from the below race between the fork() on a process and swapoff: fork(dup_mmap()) swapoff(unuse_mm) --------------- ----------------- 1) Identical mtree is built using __mt_dup(). 2) copy_pte_range()--> copy_nonpresent_pte(): The dst mm is added into the mmlist to be visible to the swapoff operation. 3) Fatal signal is sent to the parent process(which is the current during the fork) thus skip the duplication of the vmas and mark the vma range with XA_ZERO_ENTRY as a marker for this process that helps during exit_mmap(). 4) swapoff is tried on the 'mm' added to the 'mmlist' as part of the 2. 5) unuse_mm(), that iterates through the vma's of this 'mm' will hit the non-NULL zero entry and operating on this zero entry as a vma is resulting into the oops. The proper fix would be around not exposing this partially-valid tree to others when droping the mmap lock, which is being solved with [1]. A simpler solution would be checking for MMF_UNSTABLE, as it is set if mm_struct is not fully initialized in dup_mmap(). Thanks to Liam/Lorenzo/David for all the suggestions in fixing this issue. | ||||
| CVE-2025-39998 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: target_core_configfs: Add length check to avoid buffer overflow A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprintf() returns the total number of bytes that would have been written (the length of %s/%sn ), this value may exceed the buffer length (256 bytes) passed to memcpy(), this will ultimately cause function memcpy reporting a buffer overflow error. An additional check of the return value of snprintf() can avoid this buffer overflow. | ||||
| CVE-2025-40681 | 1 Xcally | 1 Omnichannel | 2026-04-15 | N/A |
| Cross-site Scripting (XSS) vulnerability reflected in xCally's Omnichannel v3.30.1. This vulnerability allowsan attacker to executed JavaScript code in the victim's browser by sending them a malicious URL using the 'failureMessage' parameter in '/login'. This vulnerability can be exploited to steal sentitive user data, such as session cookies , or to perform actions on behalf of the user. | ||||
| CVE-2025-40777 | 1 Isc | 1 Bind | 2026-04-15 | 7.5 High |
| If a `named` caching resolver is configured with `serve-stale-enable` `yes`, and with `stale-answer-client-timeout` set to `0` (the only allowable value other than `disabled`), and if the resolver, in the process of resolving a query, encounters a CNAME chain involving a specific combination of cached or authoritative records, the daemon will abort with an assertion failure. This issue affects BIND 9 versions 9.20.0 through 9.20.10, 9.21.0 through 9.21.9, and 9.20.9-S1 through 9.20.10-S1. | ||||
| CVE-2025-4103 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 8.8 High |
| The WP-GeoMeta plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the wp_ajax_wpgm_start_geojson_import() function in versions 0.3.4 to 0.3.5. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to that of an administrator. | ||||
| CVE-2025-41069 | 1 T-innova | 1 Deporsite | 2026-04-15 | N/A |
| Insecure Direct Object Reference (IDOR) vulnerability in DeporSite of T-INNOVA. This vulnerability allows an attacker to access or modify unauthorized resources by manipulating requests using the 'idUsuario' parameter in ‘/ajax/TInnova_v2/Formulario_Consentimiento/llamadaAjax/obtenerDatosConsentimientos’, which could lead to the exposure or alteration os confidential data. | ||||
| CVE-2025-4532 | 2026-04-15 | 7 High | ||
| A vulnerability classified as critical has been found in Shanghai Bairui Information Technology SunloginClient 15.8.3.19819. This affects an unknown part in the library process.dll of the file sunlogin_guard.exe. The manipulation leads to uncontrolled search path. Local access is required to approach this attack. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-5113 | 2026-04-15 | N/A | ||
| The Diviotec professional series exposes a web interface. One endpoint is vulnerable to arbitrary command injection and hardcoded passwords are used. | ||||
| CVE-2025-4534 | 2026-04-15 | 3.7 Low | ||
| A vulnerability, which was classified as problematic, has been found in SunGrow Logger1000 01_A. This issue affects some unknown processing. The manipulation leads to weak password requirements. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-4619 | 1 Palo Alto Networks | 1 Pan-os | 2026-04-15 | N/A |
| A denial-of-service (DoS) vulnerability in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to reboot a firewall by sending a specially crafted packet through the dataplane. Repeated attempts to initiate a reboot causes the firewall to enter maintenance mode. This issue is applicable to the PAN-OS software versions listed below on PA-Series firewalls, VM-Series firewalls, and Prisma® Access software. This issue does not affect Cloud NGFW. We have successfully completed the Prisma Access upgrade for all customers, with the exception of those facing issues such as conflicting maintenance windows. Remaining customers will be promptly scheduled for an upgrade through our standard upgrade process. | ||||
| CVE-2025-4631 | 2026-04-15 | 9.8 Critical | ||
| The Profitori plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the stocktend_object endpoint in versions 2.0.6.0 to 2.1.1.3. This makes it possible to trigger the save_object_as_user() function for objects whose '_datatype' is set to 'users',. This allows unauthenticated attackers to write arbitrary strings straight into the user’s wp_capabilities meta field, potentially elevating the privileges of an existing user account or a newly created one to that of an administrator. | ||||
| CVE-2025-48757 | 2026-04-15 | 9.3 Critical | ||
| An insufficient database Row-Level Security policy in Lovable through 2025-04-15 allows remote unauthenticated attackers to read or write to arbitrary database tables of generated sites. NOTE: this is disputed by the Supplier because each individual customer of the Lovable platform accepts a responsibility over protecting the data of their application. | ||||
| CVE-2025-52917 | 2026-04-15 | 4.3 Medium | ||
| The Yealink RPS API before 2025-05-26 lacks rate limiting, potentially enabling information disclosure via excessive requests. | ||||
| CVE-2025-53892 | 1 Intlify | 1 Vue-i18n | 2026-04-15 | N/A |
| Vue I18n is the internationalization plugin for Vue.js. The escapeParameterHtml: true option in Vue I18n is designed to protect against HTML/script injection by escaping interpolated parameters. However, starting in version 9.0.0 and prior to versions 9.14.5, 10.0.8, and 11.1.0, this setting fails to prevent execution of certain tag-based payloads, such as <img src=x onerror=...>, if the interpolated value is inserted inside an HTML context using v-html. This may lead to a DOM-based XSS vulnerability, even when using escapeParameterHtml: true, if a translation string includes minor HTML and is rendered via v-html. Versions 9.14.5, 10.0.8, and 11.1.0 contain a fix for the issue. | ||||
| CVE-2025-59419 | 1 Netty | 1 Netty | 2026-04-15 | 5.3 Medium |
| Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.128.Final and 4.2.7.Final, the SMTP codec in Netty contains an SMTP command injection vulnerability due to insufficient input validation for Carriage Return (\r) and Line Feed (\n) characters in user-supplied parameters. The vulnerability exists in io.netty.handler.codec.smtp.DefaultSmtpRequest, where parameters are directly concatenated into the SMTP command string without sanitization. When methods such as SmtpRequests.rcpt(recipient) are called with a malicious string containing CRLF sequences, attackers can inject arbitrary SMTP commands. Because the injected commands are sent from the server's trusted IP address, resulting emails will likely pass SPF and DKIM authentication checks, making them appear legitimate. This allows remote attackers who can control SMTP command parameters (such as email recipients) to forge arbitrary emails from the trusted server, potentially impersonating executives and forging high-stakes corporate communications. This issue has been patched in versions 4.1.129.Final and 4.2.8.Final. No known workarounds exist. | ||||
| CVE-2025-59840 | 1 Vega Project | 1 Vega | 2026-04-15 | 8.1 High |
| Vega is a visualization grammar, a declarative format for creating, saving, and sharing interactive visualization designs. In Vega prior to version 6.2.0, applications meeting 2 conditions are at risk of arbitrary JavaScript code execution, even if "safe mode" expressionInterpreter is used. They are vulnerable if they use `vega` in an application that attaches `vega` library and a `vega.View` instance similar to the Vega Editor to the global `window` and if they allow user-defined Vega `JSON` definitions (vs JSON that was is only provided through source code). Patches are available in the following Vega applications. If using the latest Vega line (6.x), upgrade to `vega` `6.2.0` / `vega-expression` `6.1.0` / `vega-interpreter` `2.2.1` (if using AST evaluator mode). If using Vega in a non-ESM environment, upgrade to `vega-expression` `5.2.1` / `1.2.1` (if using AST evaluator mode). Some workarounds are available. Do not attach `vega` View instances to global variables, and do not attach `vega` to the global window. These practices of attaching the vega library and View instances may be convenient for debugging, but should not be used in production or in any situation where vega/vega-lite definitions could be provided by untrusted parties. | ||||
| CVE-2025-62378 | 1 Commandkit | 1 Commandkit | 2026-04-15 | 6.1 Medium |
| CommandKit is the discord.js meta-framework for building Discord bots. In versions 1.2.0-rc.1 through 1.2.0-rc.11, a logic flaw exists in the message command handler that affects how the commandName property is exposed to both middleware functions and command execution contexts when handling command aliases. When a message command is invoked using an alias, the ctx.commandName value reflects the alias rather than the canonical command name. This occurs in both middleware functions and within the command's own run function. Although not explicitly documented, CommandKit's examples and guidance around middleware usage implicitly convey that ctx.commandName represents the canonical command identifier. Middleware examples in the documentation consistently use ctx.commandName to reference the command being executed. Developers who assume ctx.commandName is canonical may introduce unintended behavior when relying on it for logic such as permission checks, rate limiting, or audit logging. This could allow unauthorized command execution or inaccurate access control decisions. Slash commands and context menu commands are not affected. This issue has been patched in version 1.2.0-rc.12, where ctx.commandName now consistently returns the actual canonical command name regardless of the alias used to invoke it. | ||||