Export limit exceeded: 367106 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (367106 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-20207 | 2026-04-15 | 4.3 Medium | ||
| A vulnerability in Simple Network Management Protocol (SNMP) polling for Cisco Secure Email and Web Manager, Cisco Secure Email Gateway, and Cisco Secure Web Appliance could allow an authenticated, remote attacker to obtain confidential information about the underlying operating system. This vulnerability exists because the appliances do not protect confidential information at rest in response to SNMP poll requests. An attacker could exploit this vulnerability by sending a crafted SNMP poll request to the affected appliance. A successful exploit could allow the attacker to discover confidential information that should be restricted. To exploit this vulnerability, an attacker must have the configured SNMP credentials. | ||||
| CVE-2025-20212 | 2026-04-15 | 7.7 High | ||
| A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series devices could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the Cisco AnyConnect service on an affected device. To exploit this vulnerability, the attacker must have valid VPN user credentials on the affected device. This vulnerability exists because a variable is not initialized when an SSL VPN session is established. An attacker could exploit this vulnerability by supplying crafted attributes while establishing an SSL VPN session with an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN sessions and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers without manual intervention. | ||||
| CVE-2025-22272 | 1 Cyberark | 1 Endpoint Privilege Manager | 2026-04-15 | N/A |
| In the "/EPMUI/ModalDlgHandler.ashx?value=showReadonlyDlg" endpoint, it is possible to inject code in the "modalDlgMsgInternal" parameter via POST, which is then executed in the browser. The risk of exploiting vulnerability is reduced due to the required additional bypassing the Content-Security-Policy policy This issue affects CyberArk Endpoint Privilege Manager in SaaS version 24.7.1. The status of other versions is unknown. After multiple attempts to contact the vendor we did not receive any answer. | ||||
| CVE-2025-22288 | 2 Wordpress, Wpmudev | 2 Wordpress, Smush Image Compression And Optimization | 2026-04-15 | 4.1 Medium |
| Path Traversal: '.../...//' vulnerability in WPMU DEV - Your All-in-One WordPress Platform Smush Image Compression and Optimization wp-smushit allows Path Traversal.This issue affects Smush Image Compression and Optimization: from n/a through <= 3.17.0. | ||||
| CVE-2025-23114 | 2026-04-15 | N/A | ||
| A vulnerability in Veeam Updater component allows Man-in-the-Middle attackers to execute arbitrary code on the affected server. This issue occurs due to a failure to properly validate TLS certificate. | ||||
| CVE-2025-25246 | 1 Netgear | 2 Xr1000, Xr500 | 2026-04-15 | 8.1 High |
| NETGEAR XR1000 before 1.0.0.74, XR1000v2 before 1.1.0.22, and XR500 before 2.3.2.134 allow remote code execution by unauthenticated users. | ||||
| CVE-2025-24372 | 1 Ckan | 1 Ckan | 2026-04-15 | 7.3 High |
| CKAN is an open-source DMS (data management system) for powering data hubs and data portals. Using a specially crafted file, a user could potentially upload a file containing code that when executed could send arbitrary requests to the server. If that file was opened by an administrator, it could lead to escalation of privileges of the original submitter or other malicious actions. Users must have been registered to the site to exploit this vulnerability. This vulnerability has been fixed in CKAN 2.10.7 and 2.11.2. Users are advised to upgrade. On versions prior to CKAN 2.10.7 and 2.11.2, site maintainers can restrict the file types supported for uploading using the `ckan.upload.user.mimetypes` / `ckan.upload.user.types` and `ckan.upload.group.mimetypes` / `ckan.upload.group.types` config options. To entirely disable file uploads users can use: `ckan.upload.user.types = none` | ||||
| CVE-2025-26326 | 2026-04-15 | 8.8 High | ||
| A vulnerability was identified in the NVDA Remote (version 2.6.4) and Tele NVDA Remote (version 2025.3.3) remote connection add-ons, which allows an attacker to obtain total control of the remote system by guessing a weak password. The problem occurs because these add-ons accept any password entered by the user and do not have an additional authentication or computer verification mechanism. Tests indicate that more than 1,000 systems use easy-to-guess passwords, many with less than 4 to 6 characters, including common sequences. This allows brute force attacks or trial-and-error attempts by malicious invaders. The vulnerability can be exploited by a remote attacker who knows or can guess the password used in the connection. As a result, the attacker gains complete access to the affected system and can execute commands, modify files, and compromise user security. | ||||
| CVE-2025-27244 | 2026-04-15 | N/A | ||
| AssetView and AssetView CLOUD contain an issue with acquiring sensitive information from sent data to the developer. If exploited, sensitive information may be obtained by a remote unauthenticated attacker. | ||||
| CVE-2025-27608 | 2026-04-15 | N/A | ||
| Arduino IDE 2.x is an IDE based on the Theia IDE framework and built with Electron. A Self Cross-Site Scripting (XSS) vulnerability has been identified within the Arduino-IDE prior to version v2.3.5. The vulnerability occurs in the Additional Board Manager URLs field, which can be found in the Preferences -> Settings section of the Arduino IDE interface. In the vulnerable versions, any values entered in this field are directly displayed to the user through a notification tooltip object, without a proper output encoding routine, due to the underlying ElectronJS engine interpretation. This vulnerability exposes the input parameter to Self-XSS attacks, which may lead to security risks depending on where the malicious payload is injected. This vulnerability is fixed in 2.3.5. | ||||
| CVE-2025-2786 | 1 Redhat | 1 Openshift Distributed Tracing | 2026-04-15 | 4.3 Medium |
| A flaw was found in Tempo Operator, where it creates a ServiceAccount, ClusterRole, and ClusterRoleBinding when a user deploys a TempoStack or TempoMonolithic instance. This flaw allows a user with full access to their namespace to extract the ServiceAccount token and use it to submit TokenReview and SubjectAccessReview requests, potentially revealing information about other users' permissions. While this does not allow privilege escalation or impersonation, it exposes information that could aid in gathering information for further attacks. | ||||
| CVE-2025-2842 | 1 Redhat | 1 Openshift Distributed Tracing | 2026-04-15 | 4.3 Medium |
| A flaw was found in the Tempo Operator. When the Jaeger UI Monitor Tab functionality is enabled in a Tempo instance managed by the Tempo Operator, the Operator creates a ClusterRoleBinding for the Service Account of the Tempo instance to grant the cluster-monitoring-view ClusterRole. This can be exploited if a user has 'create' permissions on TempoStack and 'get' permissions on Secret in a namespace (for example, a user has ClusterAdmin permissions for a specific namespace), as the user can read the token of the Tempo service account and therefore has access to see all cluster metrics. | ||||
| CVE-2025-3063 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 8.8 High |
| The Shopper Approved Reviews plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the ajax_callback_update_sa_option() function in versions 2.0 to 2.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site. | ||||
| CVE-2025-31479 | 2026-04-15 | 8.2 High | ||
| canonical/get-workflow-version-action is a GitHub composite action to get commit SHA that GitHub Actions reusable workflow was called with. Prior to 1.0.1, if the get-workflow-version-action step fails, the exception output may include the GITHUB_TOKEN. If the full token is included in the exception output, GitHub will automatically redact the secret from the GitHub Actions logs. However, the token may be truncated—causing part of the GITHUB_TOKEN to be displayed in plaintext in the GitHub Actions logs. Anyone with read access to the GitHub repository can view GitHub Actions logs. For public repositories, anyone can view the GitHub Actions logs. The opportunity to exploit this vulnerability is limited—the GITHUB_TOKEN is automatically revoked when the job completes. However, there is an opportunity for an attack in the time between the GITHUB_TOKEN being displayed in the logs and the completion of the job. Users using the github-token input are impacted. This vulnerability is fixed in 1.0.1. | ||||
| CVE-2025-32898 | 3 Apple, Google, Kde | 6 Ios, Android, Gsconnect and 3 more | 2026-04-15 | 4.7 Medium |
| The KDE Connect verification-code protocol before 2025-04-18 uses only 8 characters and therefore allows brute-force attacks. This affects KDE Connect before 1.33.0 on Android, KDE Connect before 25.04 on desktop, KDE Connect before 0.5 on iOS, Valent before 1.0.0.alpha.47, and GSConnect before 59. | ||||
| CVE-2025-31484 | 2026-04-15 | N/A | ||
| conda-forge infrastructure holds common configurations and settings for key pieces of the conda-forge infrastructure. Between 2025-02-10 and 2025-04-01, conda-forge infrastructure used the wrong token for Azure's cf-staging access. This bug meant that any feedstock maintainer could upload a package to the conda-forge channel, bypassing our feedstock-token + upload process. The security logs on anaconda.org were check for any packages that were not copied from the cf-staging to the conda-forge channel and none were found. | ||||
| CVE-2025-32899 | 1 Kde | 1 Kdeconnect | 2026-04-15 | 4.3 Medium |
| In KDE Connect before 1.33.0 on Android, a packet can be crafted that causes two paired devices to unpair. Specifically, it is an invalid discovery packet sent over broadcast UDP. | ||||
| CVE-2025-32900 | 3 Apple, Google, Kde | 6 Ios, Android, Gsconnect and 3 more | 2026-04-15 | 4.3 Medium |
| In the KDE Connect information-exchange protocol before 2025-04-18, a packet can be crafted to temporarily change the displayed information about a device, because broadcast UDP is used. This affects KDE Connect before 1.33.0 on Android, KDE Connect before 25.04 on desktop, KDE Connect before 0.5 on iOS, Valent before 1.0.0.alpha.47, and GSConnect before 59. | ||||
| CVE-2025-32901 | 1 Kde | 1 Kdeconnect | 2026-04-15 | 4.3 Medium |
| In KDE Connect before 1.33.0 on Android, malicious device IDs (sent via broadcast UDP) could cause an application crash. | ||||
| CVE-2025-3534 | 2026-04-15 | 6.3 Medium | ||
| A vulnerability, which was classified as critical, was found in PowerCreator CMS 1.0. Affected is an unknown function of the file /OpenPublicCourse.aspx. The manipulation of the argument cid leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||