Export limit exceeded: 364647 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (364647 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40307 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: validate cluster allocation bits of the allocation bitmap syzbot created an exfat image with cluster bits not set for the allocation bitmap. exfat-fs reads and uses the allocation bitmap without checking this. The problem is that if the start cluster of the allocation bitmap is 6, cluster 6 can be allocated when creating a directory with mkdir. exfat zeros out this cluster in exfat_mkdir, which can delete existing entries. This can reallocate the allocated entries. In addition, the allocation bitmap is also zeroed out, so cluster 6 can be reallocated. This patch adds exfat_test_bitmap_range to validate that clusters used for the allocation bitmap are correctly marked as in-use. | ||||
| CVE-2025-40308 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. | ||||
| CVE-2025-40310 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw There is race in amdgpu_amdkfd_device_fini_sw and interrupt. if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and kfree(kfd), and KGD interrupt generated. kernel panic log: BUG: kernel NULL pointer dereference, address: 0000000000000098 amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP PGD d78c68067 P4D d78c68067 kfd kfd: amdgpu: Allocated 3969056 bytes on gart PUD 1465b8067 PMD @ Oops: @002 [#1] SMP NOPTI kfd kfd: amdgpu: Total number of KFD nodes to be created: 4 CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40 Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc 89 c6 e8 07 38 5d RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018 0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098 ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020 0000000000000000 R11: 0000000000000000 R12: 0900000000000002 ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00 CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu] ? amdgpu_fence_process+0xa4/0x150 [amdgpu] kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace amdgpu_irq_dispatch+0x165/0x210 [amdgpu] amdgpu_ih_process+0x80/0x100 [amdgpu] amdgpu: Virtual CRAT table created for GPU amdgpu_irq_handler+0x1f/@x60 [amdgpu] __handle_irq_event_percpu+0x3d/0x170 amdgpu: Topology: Add dGPU node [0x74a2:0x1002] handle_irq_event+0x5a/@xcO handle_edge_irq+0x93/0x240 kfd kfd: amdgpu: KFD node 1 partition @ size 49148M asm_call_irq_on_stack+0xf/@x20 </IRQ> common_interrupt+0xb3/0x130 asm_common_interrupt+0x1le/0x40 5.10.134-010.a1i5000.a18.x86_64 #1 | ||||
| CVE-2025-40312 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Verify inode mode when loading from disk The inode mode loaded from corrupted disk can be invalid. Do like what commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk") does. | ||||
| CVE-2025-40314 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: Use-after-free during failed initialization and exit of cdnsp gadget In the __cdnsp_gadget_init() and cdnsp_gadget_exit() functions, the gadget structure (pdev->gadget) was freed before its endpoints. The endpoints are linked via the ep_list in the gadget structure. Freeing the gadget first leaves dangling pointers in the endpoint list. When the endpoints are subsequently freed, this results in a use-after-free. Fix: By separating the usb_del_gadget_udc() operation into distinct "del" and "put" steps, cdnsp_gadget_free_endpoints() can be executed prior to the final release of the gadget structure with usb_put_gadget(). A patch similar to bb9c74a5bd14("usb: dwc3: gadget: Free gadget structure only after freeing endpoints"). | ||||
| CVE-2025-40318 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix race in hci_cmd_sync_dequeue_once hci_cmd_sync_dequeue_once() does lookup and then cancel the entry under two separate lock sections. Meanwhile, hci_cmd_sync_work() can also delete the same entry, leading to double list_del() and "UAF". Fix this by holding cmd_sync_work_lock across both lookup and cancel, so that the entry cannot be removed concurrently. | ||||
| CVE-2025-40319 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Sync pending IRQ work before freeing ring buffer Fix a race where irq_work can be queued in bpf_ringbuf_commit() but the ring buffer is freed before the work executes. In the syzbot reproducer, a BPF program attached to sched_switch triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer is freed before this work executes, the irq_work thread may accesses freed memory. Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work complete before freeing the buffer. | ||||
| CVE-2025-40320 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential cfid UAF in smb2_query_info_compound When smb2_query_info_compound() retries, a previously allocated cfid may have been freed in the first attempt. Because cfid wasn't reset on replay, later cleanup could act on a stale pointer, leading to a potential use-after-free. Reinitialize cfid to NULL under the replay label. Example trace (trimmed): refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110 [...] RIP: 0010:refcount_warn_saturate+0x9c/0x110 [...] Call Trace: <TASK> smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? step_into+0x10d/0x690 ? __legitimize_path+0x28/0x60 smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? kmem_cache_alloc+0x18a/0x340 ? getname_flags+0x46/0x1e0 cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] statfs_by_dentry+0x67/0x90 vfs_statfs+0x16/0xd0 user_statfs+0x54/0xa0 __do_sys_statfs+0x20/0x50 do_syscall_64+0x58/0x80 | ||||
| CVE-2025-40326 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Define actions for the new time_deleg FATTR4 attributes NFSv4 clients won't send legitimate GETATTR requests for these new attributes because they are intended to be used only with CB_GETATTR and SETATTR. But NFSD has to do something besides crashing if it ever sees a GETATTR request that queries these attributes. RFC 8881 Section 18.7.3 states: > The server MUST return a value for each attribute that the client > requests if the attribute is supported by the server for the > target file system. If the server does not support a particular > attribute on the target file system, then it MUST NOT return the > attribute value and MUST NOT set the attribute bit in the result > bitmap. The server MUST return an error if it supports an > attribute on the target but cannot obtain its value. In that case, > no attribute values will be returned. Further, RFC 9754 Section 5 states: > These new attributes are invalid to be used with GETATTR, VERIFY, > and NVERIFY, and they can only be used with CB_GETATTR and SETATTR > by a client holding an appropriate delegation. Thus there does not appear to be a specific server response mandated by specification. Taking the guidance that querying these attributes via GETATTR is "invalid", NFSD will return nfserr_inval, failing the request entirely. | ||||
| CVE-2025-4104 | 2026-04-15 | 9.8 Critical | ||
| The Frontend Dashboard plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the fed_wp_ajax_fed_login_form_post() function in versions 1.0 to 2.2.6. This makes it possible for unauthenticated attackers to reset the administrator’s email and password, and elevate their privileges to that of an administrator. | ||||
| CVE-2025-4212 | 2 Wordpress, Wpwham | 2 Wordpress, Checkout Files Upload For Woocommerce | 2026-04-15 | 7.2 High |
| The Checkout Files Upload for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via file uploads in all versions up to, and including, 2.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in image files that will execute whenever a user accesses the injected page. | ||||
| CVE-2025-42615 | 1 Circl | 1 Vulnerability-lookup | 2026-04-15 | N/A |
| In affected versions, vulnerability-lookup did not track or limit failed One-Time Password (OTP) attempts during Two-Factor Authentication (2FA) verification. An attacker who already knew or guessed a valid username and password could submit an arbitrary number of OTP codes without causing the account to be locked or generating any specific alert for administrators. This lack of rate-limiting and lockout on OTP failures significantly lowers the cost of online brute-force attacks against 2FA codes and increases the risk of successful account takeover, especially if OTP entropy is reduced (e.g. short numeric codes, user reuse, or predictable tokens). Additionally, administrators had no direct visibility into accounts experiencing repeated 2FA failures, making targeted attacks harder to detect and investigate. The patch introduces a persistent failed_otp_attempts counter on user accounts, locks the user after 5 invalid OTP submissions, resets the counter on successful verification, and surfaces failed 2FA attempts in the admin user list. This enforces an account lockout policy for OTP brute-force attempts and improves monitoring capabilities for suspicious 2FA activity.This issue affects Vulnerability-Lookup: before 2.18.0. | ||||
| CVE-2025-42616 | 1 Circl | 1 Vulnerability-lookup | 2026-04-15 | N/A |
| Some endpoints in vulnerability-lookup that modified application state (e.g. changing database entries, user data, configurations, or other privileged actions) may have been accessible via HTTP GET requests without requiring a CSRF token. This flaw leaves the application vulnerable to Cross-Site Request Forgery (CSRF) attacks: an attacker who tricks a logged-in user into visiting a malicious website could cause the user’s browser to issue GET requests that perform unintended state-changing operations in the context of their authenticated session. Because the server would treat these GET requests as valid (since no CSRF protection or POST method enforcement was in place), the attacker could exploit this to escalate privileges, change settings, or carry out other unauthorized actions without needing the user’s explicit consent or awareness. The fix ensures that all state-changing endpoints now require HTTP POST requests and include a valid CSRF token. This enforces that state changes cannot be triggered by arbitrary cross-site GET requests. This issue affects Vulnerability-Lookup: before 2.18.0. | ||||
| CVE-2025-4287 | 1 Pytorch | 1 Pytorch | 2026-04-15 | 3.3 Low |
| A vulnerability was found in PyTorch 2.6.0+cu124. It has been rated as problematic. Affected by this issue is the function torch.cuda.nccl.reduce of the file torch/cuda/nccl.py. The manipulation leads to denial of service. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The patch is identified as 5827d2061dcb4acd05ac5f8e65d8693a481ba0f5. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2025-45388 | 1 Wagtail | 1 Wagtail | 2026-04-15 | 6.1 Medium |
| Wagtail CMS 6.4.1 is vulnerable to a Stored Cross-Site Scripting (XSS) in the document upload functionality. Attackers can inject malicious code inside a PDF file. When a user clicks the document in the CMS interface, the payload executes. NOTE: this is disputed by the Supplier because "It has been well documented that when serving uploaded files using a method outside of Wagtail (which admittedly is the default), it requires additional configuration from the developer, because Wagtail cannot control how these are served. ... For example, if a Wagtail instance is configured to upload files into AWS S3, Wagtail cannot control the permissions on how they're served, nor any headers used when serving them (a limitation of S3)." | ||||
| CVE-2025-45764 | 2026-04-15 | 3.2 Low | ||
| jsrsasign v11.1.0 was discovered to contain weak encryption. NOTE: this issue has been disputed by a third party who believes that CVE IDs can be assigned for key lengths in specific applications that use a library, and should not be assigned to the default key lengths in a library. This dispute is subject to review under CNA rules 4.1.4, 4.1.14, and other rules; the dispute tagging is not meant to recommend an outcome for this CVE Record. | ||||
| CVE-2025-47905 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2026-04-15 | 5.4 Medium |
| Varnish Cache before 7.6.3 and 7.7 before 7.7.1, and Varnish Enterprise before 6.0.13r14, allow client-side desync via HTTP/1 requests, because the product incorrectly permits CRLF to be skipped to delimit chunk boundaries. | ||||
| CVE-2025-47908 | 1 Golang | 1 Cors | 2026-04-15 | 7.5 High |
| Middleware causes a prohibitive amount of heap allocations when processing malicious preflight requests that include a Access-Control-Request-Headers (ACRH) header whose value contains many commas. This behavior can be abused by attackers to produce undue load on the middleware/server as an attempt to cause a denial of service. | ||||
| CVE-2025-48393 | 1 Eaton | 1 G4 Pdu | 2026-04-15 | 5.7 Medium |
| The server identity check mechanism for firmware upgrade performed via command shell is insecurely implemented potentially allowing an attacker to perform a Man-in-the-middle attack. This security issue has been fixed in the latest firmware version of Eaton G4 PDU which is available on the Eaton download center. | ||||
| CVE-2025-50740 | 2026-04-15 | 6.1 Medium | ||
| AutoConnect 1.4.2, an Arduino library, is vulnerable to a cross site scripting (xss) vulnerability. The AutoConnect web interface /_ac/config allows HTML/JS code to be executed via a crafted network SSID. | ||||