Export limit exceeded: 409951 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409951 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53823 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block/rq_qos: protect rq_qos apis with a new lock commit 50e34d78815e ("block: disable the elevator int del_gendisk") move rq_qos_exit() from disk_release() to del_gendisk(), this will introduce some problems: 1) If rq_qos_add() is triggered by enabling iocost/iolatency through cgroupfs, then it can concurrent with del_gendisk(), it's not safe to write 'q->rq_qos' concurrently. 2) Activate cgroup policy that is relied on rq_qos will call rq_qos_add() and blkcg_activate_policy(), and if rq_qos_exit() is called in the middle, null-ptr-dereference will be triggered in blkcg_activate_policy(). 3) blkg_conf_open_bdev() can call blkdev_get_no_open() first to find the disk, then if rq_qos_exit() from del_gendisk() is done before rq_qos_add(), then memory will be leaked. This patch add a new disk level mutex 'rq_qos_mutex': 1) The lock will protect rq_qos_exit() directly. 2) For wbt that doesn't relied on blk-cgroup, rq_qos_add() can only be called from disk initialization for now because wbt can't be destructed until rq_qos_exit(), so it's safe not to protect wbt for now. Hoever, in case that rq_qos dynamically destruction is supported in the furture, this patch also protect rq_qos_add() from wbt_init() directly, this is enough because blk-sysfs already synchronize writers with disk removal. 3) For iocost and iolatency, in order to synchronize disk removal and cgroup configuration, the lock is held after blkdev_get_no_open() from blkg_conf_open_bdev(), and is released in blkg_conf_exit(). In order to fix the above memory leak, disk_live() is checked after holding the new lock. | ||||
| CVE-2023-53819 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: amdgpu: validate offset_in_bo of drm_amdgpu_gem_va This is motivated by OOB access in amdgpu_vm_update_range when offset_in_bo+map_size overflows. v2: keep the validations in amdgpu_vm_bo_map v3: add the validations to amdgpu_vm_bo_map/amdgpu_vm_bo_replace_map rather than to amdgpu_gem_va_ioctl | ||||
| CVE-2023-53817 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui() During NVMeTCP Authentication a controller can trigger a kernel oops by specifying the 8192 bit Diffie Hellman group and passing a correctly sized, but zeroed Diffie Hellamn value. mpi_cmp_ui() was detecting this if the second parameter was 0, but 1 is passed from dh_is_pubkey_valid(). This causes the null pointer u->d to be dereferenced towards the end of mpi_cmp_ui() | ||||
| CVE-2023-53816 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix potential kgd_mem UAFs kgd_mem pointers returned by kfd_process_device_translate_handle are only guaranteed to be valid while p->mutex is held. As soon as the mutex is unlocked, another thread can free the BO. | ||||
| CVE-2023-53810 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: release crypto keyslot before reporting I/O complete Once all I/O using a blk_crypto_key has completed, filesystems can call blk_crypto_evict_key(). However, the block layer currently doesn't call blk_crypto_put_keyslot() until the request is being freed, which happens after upper layers have been told (via bio_endio()) the I/O has completed. This causes a race condition where blk_crypto_evict_key() can see 'slot_refs != 0' without there being an actual bug. This makes __blk_crypto_evict_key() hit the 'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without doing anything, eventually causing a use-after-free in blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only been seen when per-file keys are being used with fscrypt.) There are two options to fix this: either release the keyslot before bio_endio() is called on the request's last bio, or make __blk_crypto_evict_key() ignore slot_refs. Let's go with the first solution, since it preserves the ability to report bugs (via WARN_ON_ONCE) where a key is evicted while still in-use. | ||||
| CVE-2023-53806 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: populate subvp cmd info only for the top pipe [Why] System restart observed while changing the display resolution to 8k with extended mode. Sytem restart was caused by a page fault. [How] When the driver populates subvp info it did it for both the pipes using vblank which caused an outof bounds array access causing the page fault. added checks to allow the top pipe only to fix this issue. | ||||
| CVE-2023-53804 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode() During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may cause use-after-free read if inodes are left in "garbage_list" and released by nilfs_dispose_list() at the end of nilfs_detach_log_writer(). Fix this issue by modifying nilfs_evict_inode() to only clear inode without additional metadata changes that use nilfs_root if the file system is degraded to read-only or the writer is detached. | ||||
| CVE-2023-53800 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume resizing failed There is an use-after-free problem reported by KASAN: ================================================================== BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2 PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi] ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record() returns an error in ubi_resize_volume(), "new_eba_tbl" will be freed on error handing path, but it is holded by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle of "vol->eba_tbl" and "vol" are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by not freeing "new_eba_tbl" after it replaced in ubi_eba_replace_table(), while will be freed in next volume resizing. | ||||
| CVE-2023-53797 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Use ktime_t rather than int when dealing with timestamps Code which interacts with timestamps needs to use the ktime_t type returned by functions like ktime_get. The int type does not offer enough space to store these values, and attempting to use it is a recipe for problems. In this particular case, overflows would occur when calculating/storing timestamps leading to incorrect values being reported to userspace. In some cases these bad timestamps cause input handling in userspace to appear hung. | ||||
| CVE-2023-53795 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: IOMMUFD_DESTROY should not increase the refcount syzkaller found a race where IOMMUFD_DESTROY increments the refcount: obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY); if (IS_ERR(obj)) return PTR_ERR(obj); iommufd_ref_to_users(obj); /* See iommufd_ref_to_users() */ if (!iommufd_object_destroy_user(ucmd->ictx, obj)) As part of the sequence to join the two existing primitives together. Allowing the refcount the be elevated without holding the destroy_rwsem violates the assumption that all temporary refcount elevations are protected by destroy_rwsem. Racing IOMMUFD_DESTROY with iommufd_object_destroy_user() will cause spurious failures: WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478 Modules linked in: CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477 Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41 RSP: 0018:ffffc90003067e08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500 R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88 R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline] iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813 iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The solution is to not increment the refcount on the IOMMUFD_DESTROY path at all. Instead use the xa_lock to serialize everything. The refcount check == 1 and xa_erase can be done under a single critical region. This avoids the need for any refcount incrementing. It has the downside that if userspace races destroy with other operations it will get an EBUSY instead of waiting, but this is kind of racing is already dangerous. | ||||
| CVE-2023-53778 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Clean up integer overflow checking in map_user_pages() The encode_dma() function has some validation on in_trans->size but it would be more clear to move those checks to find_and_map_user_pages(). The encode_dma() had two checks: if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) return -EINVAL; The in_trans->addr variable is the starting address. The in_trans->size variable is the total size of the transfer. The transfer can occur in parts and the resources->xferred_dma_size tracks how many bytes we have already transferred. This patch introduces a new variable "remaining" which represents the amount we want to transfer (in_trans->size) minus the amount we have already transferred (resources->xferred_dma_size). I have modified the check for if in_trans->size is zero to instead check if in_trans->size is less than resources->xferred_dma_size. If we have already transferred more bytes than in_trans->size then there are negative bytes remaining which doesn't make sense. If there are zero bytes remaining to be copied, just return success. The check in encode_dma() checked that "addr + size" could not overflow and barring a driver bug that should work, but it's easier to check if we do this in parts. First check that "in_trans->addr + resources->xferred_dma_size" is safe. Then check that "xfer_start_addr + remaining" is safe. My final concern was that we are dealing with u64 values but on 32bit systems the kmalloc() function will truncate the sizes to 32 bits. So I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);" and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit systems. | ||||
| CVE-2023-53769 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: virt/coco/sev-guest: Double-buffer messages The encryption algorithms read and write directly to shared unencrypted memory, which may leak information as well as permit the host to tamper with the message integrity. Instead, copy whole messages in or out as needed before doing any computation on them. | ||||
| CVE-2023-53768 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regmap-irq: Fix out-of-bounds access when allocating config buffers When allocating the 2D array for handling IRQ type registers in regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix with num_config_bases rows and num_config_regs columns. This is currently handled by allocating a buffer to hold a pointer for each row (i.e. num_config_bases). After that, the logic attempts to allocate the memory required to hold the register configuration for each row. However, instead of doing this allocation for each row (i.e. num_config_bases allocations), the logic erroneously does this allocation num_config_regs number of times. This scenario can lead to out-of-bounds accesses when num_config_regs is greater than num_config_bases. Fix this by updating the terminating condition of the loop that allocates the memory for holding the register configuration to allocate memory only for each row in the matrix. Amit Pundir reported a crash that was occurring on his db845c device due to memory corruption (see "Closes" tag for Amit's report). The KASAN report below helped narrow it down to this issue: [ 14.033877][ T1] ================================================================== [ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364 [ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1 [ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850 [ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8 [ 14.255669][ T1] The buggy address is located 0 bytes inside of [ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858) | ||||
| CVE-2023-53763 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "f2fs: fix to do sanity check on extent cache correctly" syzbot reports a f2fs bug as below: UBSAN: array-index-out-of-bounds in fs/f2fs/f2fs.h:3275:19 index 1409 is out of range for type '__le32[923]' (aka 'unsigned int[923]') Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 inline_data_addr fs/f2fs/f2fs.h:3275 [inline] __recover_inline_status fs/f2fs/inode.c:113 [inline] do_read_inode fs/f2fs/inode.c:480 [inline] f2fs_iget+0x4730/0x48b0 fs/f2fs/inode.c:604 f2fs_fill_super+0x640e/0x80c0 fs/f2fs/super.c:4601 mount_bdev+0x276/0x3b0 fs/super.c:1391 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 do_new_mount+0x28f/0xae0 fs/namespace.c:3335 do_mount fs/namespace.c:3675 [inline] __do_sys_mount fs/namespace.c:3884 [inline] __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue was bisected to: commit d48a7b3a72f121655d95b5157c32c7d555e44c05 Author: Chao Yu <chao@kernel.org> Date: Mon Jan 9 03:49:20 2023 +0000 f2fs: fix to do sanity check on extent cache correctly The root cause is we applied both v1 and v2 of the patch, v2 is the right fix, so it needs to revert v1 in order to fix reported issue. v1: commit d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/20230109034920.492914-1-chao@kernel.org/ v2: commit 269d11948100 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/20230207134808.1827869-1-chao@kernel.org/ | ||||
| CVE-2023-53759 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hidraw: fix data race on device refcount The hidraw_open() function increments the hidraw device reference counter. The counter has no dedicated synchronization mechanism, resulting in a potential data race when concurrently opening a device. The race is a regression introduced by commit 8590222e4b02 ("HID: hidraw: Replace hidraw device table mutex with a rwsem"). While minors_rwsem is intended to protect the hidraw_table itself, by instead acquiring the lock for writing, the reference counter is also protected. This is symmetrical to hidraw_release(). | ||||
| CVE-2023-53752 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: deal with integer overflows in kmalloc_reserve() Blamed commit changed: ptr = kmalloc(size); if (ptr) size = ksize(ptr); size = kmalloc_size_roundup(size); ptr = kmalloc(size); This allowed various crash as reported by syzbot [1] and Kyle Zeng. Problem is that if @size is bigger than 0x80000001, kmalloc_size_roundup(size) returns 2^32. kmalloc_reserve() uses a 32bit variable (obj_size), so 2^32 is truncated to 0. kmalloc(0) returns ZERO_SIZE_PTR which is not handled by skb allocations. Following trace can be triggered if a netdev->mtu is set close to 0x7fffffff We might in the future limit netdev->mtu to more sensible limit (like KMALLOC_MAX_SIZE). This patch is based on a syzbot report, and also a report and tentative fix from Kyle Zeng. [1] BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline] BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527 Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554 CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 Call trace: dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106 print_report+0xe4/0x4b4 mm/kasan/report.c:398 kasan_report+0x150/0x1ac mm/kasan/report.c:495 kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189 memset+0x40/0x70 mm/kasan/shadow.c:44 __build_skb_around net/core/skbuff.c:294 [inline] __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527 alloc_skb include/linux/skbuff.h:1316 [inline] igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359 add_grec+0x81c/0x1124 net/ipv4/igmp.c:534 igmpv3_send_cr net/ipv4/igmp.c:667 [inline] igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810 call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers+0x54c/0x710 kernel/time/timer.c:1790 run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803 _stext+0x380/0xfbc ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79 call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891 do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84 invoke_softirq kernel/softirq.c:437 [inline] __irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683 irq_exit_rcu+0x14/0x78 kernel/softirq.c:695 el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717 __el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724 el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729 el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584 | ||||
| CVE-2023-53751 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname TCP_Server_Info::hostname may be updated once or many times during reconnect, so protect its access outside reconnect path as well and then prevent any potential use-after-free bugs. | ||||
| CVE-2023-53748 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix potential array out-of-bounds in decoder queue_setup variable *nplanes is provided by user via system call argument. The possible value of q_data->fmt->num_planes is 1-3, while the value of *nplanes can be 1-8. The array access by index i can cause array out-of-bounds. Fix this bug by checking *nplanes against the array size. | ||||
| CVE-2023-53729 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: qmi_encdec: Restrict string length in decode The QMI TLV value for strings in a lot of qmi element info structures account for null terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of bounds access when the NULL character is appended in decoding. | ||||
| CVE-2023-53718 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not swap cpu_buffer during resize process When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 00000000 ---truncated--- | ||||