Export limit exceeded: 412929 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412929 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412929 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412929 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74571 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: skip global block reserve accounting for rescue mounts [BUG] Mounting with rescue=ibadroots after corrupting the block group tree root triggers a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000100 RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs] Call Trace: fill_dummy_bgs+0xd4/0x120 [btrfs] open_ctree+0xc6e/0x1ca0 [btrfs] btrfs_get_tree+0x50d/0xa40 [btrfs] The same crash occurs with a corrupted raid stripe tree root, via btrfs_read_block_groups() instead of fill_dummy_bgs(). [CAUSE] With rescue=ibadroots, btrfs_read_roots() allows the mount to continue when either root cannot be read, leaving the corresponding root pointer NULL while its on-disk feature bit remains set. btrfs_update_global_block_rsv() then dereferences the missing root based on the feature bit alone. [FIX] Rescue mounts are fully read-only and cannot start transactions, so the global reserve is never consumed. Under btrfs_is_full_ro(), mark the reserve as full and return before performing the accounting. And since we need to check if the fs is mount fully RO, export fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h. [ Squash the fs_is_full_ro() export commit into this one. ] | ||||
| CVE-2026-74560 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/ | ||||
| CVE-2026-74559 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. | ||||
| CVE-2026-74558 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering. | ||||
| CVE-2026-74544 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change(). | ||||
| CVE-2026-74543 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work()) to prevent high CPU contention while waiting for RTNL lock. The utn->work_pending bookkeeping is no longer needed and is removed, as the workqueue core already tracks the pending/running state of the work. [1] BUG: memory leak unreferenced object 0xffff888127d5f840 (size 96): comm "syz-executor", pid 5806, jiffies 4294942188 backtrace (crc 99fdb6c8): __kmalloc_noprof+0x3bf/0x550 udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline] udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline] udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931 notifier_call_chain+0x59/0x160 kernel/notifier.c:85 call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250 register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 | ||||
| CVE-2026-74542 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 | ||||
| CVE-2026-74533 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. | ||||
| CVE-2026-74527 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. | ||||
| CVE-2026-74513 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb() look up the dmb_node under dmb_ht_lock, drop the lock and only then operate on the node's refcount. Nothing keeps the node alive across that window: __dibs_lo_unregister_dmb() removes the node from the hash table under the write lock and immediately frees it. A concurrent final put can therefore free the node between the lookup and the refcount operation: CPU0 (attach) CPU1 (owner unregisters) read_lock_bh(&dmb_ht_lock) find dmb_node (refcnt == 1) read_unlock_bh(&dmb_ht_lock) refcount_dec_and_test() 1 -> 0 write_lock_bh(&dmb_ht_lock) hash_del(&dmb_node->list) write_unlock_bh(&dmb_ht_lock) kfree(dmb_node) refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free The same window exists for the refcount_dec_and_test() calls in the detach and unregister paths. Close the race structurally by making hash table membership and the refcount transitions atomic with respect to each other: - Perform the final refcount_dec_and_test() and hash_del() in a single dmb_ht_lock write-side critical section, in both the unregister and the detach path. Freeing the node still happens after the lock is dropped, which is safe because a node whose refcount reached zero has left the hash table and can no longer be found. - This establishes the invariant that any node found in the hash table holds at least one reference, and that the final reference can only be dropped under the write lock. dibs_lo_attach_dmb() can thus take its reference with a plain refcount_inc() while still holding the read lock; refcount_inc_not_zero() is no longer needed. __dibs_lo_unregister_dmb() no longer touches the hash table and is renamed to dibs_lo_free_dmb() accordingly. Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved the code to its current location; the race was introduced earlier by commit c3a910f2380f ("net/smc: implement DMB-merged operations of loopback-ism"). Tested SMC-D via ISM and dibs loopback. | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74449 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) | ||||
| CVE-2026-74407 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-74405 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: OPP: Fix race between OPP addition and lookup A race exists between dev_pm_opp_add_dynamic() and dev_pm_opp_find_freq_exact(): CPU0 (add) CPU1 (lookup) ------------------------------- ------------------------------ _opp_add() mutex_lock() list_add(&new_opp->node, head) mutex_unlock() _opp_table_find_key() mutex_lock() dev_pm_opp_get(opp) kref_get() mutex_unlock() kref_init(&new_opp->kref) dev_pm_opp_put() kref_put_mutex() The newly added OPP is inserted into the list before its kref is initialized. A concurrent lookup can find this OPP and increment its reference count while it is still uninitialized, leading to refcount corruption and a potential premature free. Fix this by initializing ->kref and ->opp_table before making the OPP visible via list_add(). This ensures any concurrent lookup observes a fully initialized object. [ Viresh: Updated commit log ] | ||||
| CVE-2026-74389 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix log flood after cmd_mbox failure hns_roce_cmd_mbox() is the command interface between driver and hardware. When hardware is abnormal, the unlimited error printings after hns_roce_cmd_mbox() failure will cause log flood and even system crash. Replace ibdev_err() and ibdev_warn() with their ratelimited versions in the error handling path after hns_roce_cmd_mbox() (and its wrappers hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74386 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix page fragment cache leak in error path In nvmet_tcp_alloc_queue(), when a connection is closed during the allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN), the error handling jumps to out_destroy_sq and then to out_ida_remove without draining the page fragment cache. Although nvmet_tcp_free_cmd() is called in some error paths to release individual page fragments, the underlying page cache reference held by queue->pf_cache is never released. The first allocation using pf_cache is the call to nvmet_tcp_alloc_cmd() for queue->connect, which happens after ida_alloc() returns successfully. This results in a page leak each time a connection fails during allocation, which could lead to memory exhaustion over time if connections are repeatedly opened and closed. Fix this by calling page_frag_cache_drain() before freeing the queue structure in the out_ida_remove label. | ||||
| CVE-2026-74385 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check return value of nvmet_tcp_set_queue_sock The return value of nvmet_tcp_set_queue_sock() is currently ignored in nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket not being in TCP_ESTABLISHED state), the socket callbacks will not be properly set, leading to queue and socket leakage. Fix this by capturing the return value and calling nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. | ||||
| CVE-2026-74375 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix deadlock in read error recovery path raid1d and raid10d may resubmit a split md cloned bio while handling a read error. In this case, resubmitting the bio can lead to a deadlock if the array is suspended before md_handle_request() acquires an active_io reference via percpu_ref_tryget_live(). Since the cloned bio already holds an active_io reference, trying to acquire another reference via percpu_ref_tryget_live() can lead to a deadlock while the array is suspended. Fix this by using percpu_ref_get() for md cloned bios. | ||||
| CVE-2026-74373 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix bio accounting for split md cloned bios Use md_cloned_bio() to control bio accounting instead of relying on r1bio_existed in raid1 or the io_accounting flag in raid10. The previous logic does not reliably reflect whether a bio is an md cloned bio. When a failed bio is split and resubmitted via bio_submit_split_bioset() on the error path, this can lead to either double accounting for md cloned bios, or missing accounting for bios returned from bio_submit_split_bioset() Fix this by using md_cloned_bio() to detect md cloned bios and skip accounting accordingly. | ||||