Export limit exceeded: 382628 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (382628 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-46790 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: codetag: debug: mark codetags for poisoned page as empty When PG_hwpoison pages are freed they are treated differently in free_pages_prepare() and instead of being released they are isolated. Page allocation tag counters are decremented at this point since the page is considered not in use. Later on when such pages are released by unpoison_memory(), the allocation tag counters will be decremented again and the following warning gets reported: [ 113.930443][ T3282] ------------[ cut here ]------------ [ 113.931105][ T3282] alloc_tag was not set [ 113.931576][ T3282] WARNING: CPU: 2 PID: 3282 at ./include/linux/alloc_tag.h:130 pgalloc_tag_sub.part.66+0x154/0x164 [ 113.932866][ T3282] Modules linked in: hwpoison_inject fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_man4 [ 113.941638][ T3282] CPU: 2 UID: 0 PID: 3282 Comm: madvise11 Kdump: loaded Tainted: G W 6.11.0-rc4-dirty #18 [ 113.943003][ T3282] Tainted: [W]=WARN [ 113.943453][ T3282] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [ 113.944378][ T3282] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 113.945319][ T3282] pc : pgalloc_tag_sub.part.66+0x154/0x164 [ 113.946016][ T3282] lr : pgalloc_tag_sub.part.66+0x154/0x164 [ 113.946706][ T3282] sp : ffff800087093a10 [ 113.947197][ T3282] x29: ffff800087093a10 x28: ffff0000d7a9d400 x27: ffff80008249f0a0 [ 113.948165][ T3282] x26: 0000000000000000 x25: ffff80008249f2b0 x24: 0000000000000000 [ 113.949134][ T3282] x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000 [ 113.950597][ T3282] x20: ffff0000c08fcad8 x19: ffff80008251e000 x18: ffffffffffffffff [ 113.952207][ T3282] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800081746210 [ 113.953161][ T3282] x14: 0000000000000000 x13: 205d323832335420 x12: 5b5d353031313339 [ 113.954120][ T3282] x11: ffff800087093500 x10: 000000000000005d x9 : 00000000ffffffd0 [ 113.955078][ T3282] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008236ba90 x6 : c0000000ffff7fff [ 113.956036][ T3282] x5 : ffff000b34bf4dc8 x4 : ffff8000820aba90 x3 : 0000000000000001 [ 113.956994][ T3282] x2 : ffff800ab320f000 x1 : 841d1e35ac932e00 x0 : 0000000000000000 [ 113.957962][ T3282] Call trace: [ 113.958350][ T3282] pgalloc_tag_sub.part.66+0x154/0x164 [ 113.959000][ T3282] pgalloc_tag_sub+0x14/0x1c [ 113.959539][ T3282] free_unref_page+0xf4/0x4b8 [ 113.960096][ T3282] __folio_put+0xd4/0x120 [ 113.960614][ T3282] folio_put+0x24/0x50 [ 113.961103][ T3282] unpoison_memory+0x4f0/0x5b0 [ 113.961678][ T3282] hwpoison_unpoison+0x30/0x48 [hwpoison_inject] [ 113.962436][ T3282] simple_attr_write_xsigned.isra.34+0xec/0x1cc [ 113.963183][ T3282] simple_attr_write+0x38/0x48 [ 113.963750][ T3282] debugfs_attr_write+0x54/0x80 [ 113.964330][ T3282] full_proxy_write+0x68/0x98 [ 113.964880][ T3282] vfs_write+0xdc/0x4d0 [ 113.965372][ T3282] ksys_write+0x78/0x100 [ 113.965875][ T3282] __arm64_sys_write+0x24/0x30 [ 113.966440][ T3282] invoke_syscall+0x7c/0x104 [ 113.966984][ T3282] el0_svc_common.constprop.1+0x88/0x104 [ 113.967652][ T3282] do_el0_svc+0x2c/0x38 [ 113.968893][ T3282] el0_svc+0x3c/0x1b8 [ 113.969379][ T3282] el0t_64_sync_handler+0x98/0xbc [ 113.969980][ T3282] el0t_64_sync+0x19c/0x1a0 [ 113.970511][ T3282] ---[ end trace 0000000000000000 ]--- To fix this, clear the page tag reference after the page got isolated and accounted for. | ||||
| CVE-2024-46789 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook When enable CONFIG_MEMCG & CONFIG_KFENCE & CONFIG_KMEMLEAK, the following warning always occurs,This is because the following call stack occurred: mem_pool_alloc kmem_cache_alloc_noprof slab_alloc_node kfence_alloc Once the kfence allocation is successful,slab->obj_exts will not be empty, because it has already been assigned a value in kfence_init_pool. Since in the prepare_slab_obj_exts_hook function,we perform a check for s->flags & (SLAB_NO_OBJ_EXT | SLAB_NOLEAKTRACE),the alloc_tag_add function will not be called as a result.Therefore,ref->ct remains NULL. However,when we call mem_pool_free,since obj_ext is not empty, it eventually leads to the alloc_tag_sub scenario being invoked. This is where the warning occurs. So we should add corresponding checks in the alloc_tagging_slab_free_hook. For __GFP_NO_OBJ_EXT case,I didn't see the specific case where it's using kfence,so I won't add the corresponding check in alloc_tagging_slab_free_hook for now. [ 3.734349] ------------[ cut here ]------------ [ 3.734807] alloc_tag was not set [ 3.735129] WARNING: CPU: 4 PID: 40 at ./include/linux/alloc_tag.h:130 kmem_cache_free+0x444/0x574 [ 3.735866] Modules linked in: autofs4 [ 3.736211] CPU: 4 UID: 0 PID: 40 Comm: ksoftirqd/4 Tainted: G W 6.11.0-rc3-dirty #1 [ 3.736969] Tainted: [W]=WARN [ 3.737258] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [ 3.737875] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.738501] pc : kmem_cache_free+0x444/0x574 [ 3.738951] lr : kmem_cache_free+0x444/0x574 [ 3.739361] sp : ffff80008357bb60 [ 3.739693] x29: ffff80008357bb70 x28: 0000000000000000 x27: 0000000000000000 [ 3.740338] x26: ffff80008207f000 x25: ffff000b2eb2fd60 x24: ffff0000c0005700 [ 3.740982] x23: ffff8000804229e4 x22: ffff800082080000 x21: ffff800081756000 [ 3.741630] x20: fffffd7ff8253360 x19: 00000000000000a8 x18: ffffffffffffffff [ 3.742274] x17: ffff800ab327f000 x16: ffff800083398000 x15: ffff800081756df0 [ 3.742919] x14: 0000000000000000 x13: 205d344320202020 x12: 5b5d373038343337 [ 3.743560] x11: ffff80008357b650 x10: 000000000000005d x9 : 00000000ffffffd0 [ 3.744231] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008237bad0 x6 : c0000000ffff7fff [ 3.744907] x5 : ffff80008237ba78 x4 : ffff8000820bbad0 x3 : 0000000000000001 [ 3.745580] x2 : 68d66547c09f7800 x1 : 68d66547c09f7800 x0 : 0000000000000000 [ 3.746255] Call trace: [ 3.746530] kmem_cache_free+0x444/0x574 [ 3.746931] mem_pool_free+0x44/0xf4 [ 3.747306] free_object_rcu+0xc8/0xdc [ 3.747693] rcu_do_batch+0x234/0x8a4 [ 3.748075] rcu_core+0x230/0x3e4 [ 3.748424] rcu_core_si+0x14/0x1c [ 3.748780] handle_softirqs+0x134/0x378 [ 3.749189] run_ksoftirqd+0x70/0x9c [ 3.749560] smpboot_thread_fn+0x148/0x22c [ 3.749978] kthread+0x10c/0x118 [ 3.750323] ret_from_fork+0x10/0x20 [ 3.750696] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-46779 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Free pvr_vm_gpuva after unlink This caused a measurable memory leak. Although the individual allocations are small, the leaks occurs in a high-usage codepath (remapping or unmapping device memory) so they add up quickly. | ||||
| CVE-2024-46778 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check UnboundedRequestEnabled's value CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus if (p->UnboundedRequestEnabled) checks its address, not bool value. This fixes 1 REVERSE_INULL issue reported by Coverity. | ||||
| CVE-2024-46769 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: intel: Add check devm_kasprintf() returned value intel_spi_populate_chip() use devm_kasprintf() to set pdata->name. This can return a NULL pointer on failure but this returned value is not checked. | ||||
| CVE-2024-46768 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Check if WMI event data exists The BIOS can choose to return no event data in response to a WMI event, so the ACPI object passed to the WMI notify handler can be NULL. Check for such a situation and ignore the event in such a case. | ||||
| CVE-2024-46766 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: move netif_queue_set_napi to rtnl-protected sections Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154 | ||||
| CVE-2024-46760 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: schedule rx work after everything is set up Right now it's possible to hit NULL pointer dereference in rtw_rx_fill_rx_status on hw object and/or its fields because initialization routine can start getting USB replies before rtw_dev is fully setup. The stack trace looks like this: rtw_rx_fill_rx_status rtw8821c_query_rx_desc rtw_usb_rx_handler ... queue_work rtw_usb_read_port_complete ... usb_submit_urb rtw_usb_rx_resubmit rtw_usb_init_rx rtw_usb_probe So while we do the async stuff rtw_usb_probe continues and calls rtw_register_hw, which does all kinds of initialization (e.g. via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on. Fix this by moving the first usb_submit_urb after everything is set up. For me, this bug manifested as: [ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped [ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status because I'm using Larry's backport of rtw88 driver with the NULL checks in rtw_rx_fill_rx_status. | ||||
| CVE-2024-46749 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush() This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-46741 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix double free of 'buf' in error path smatch warning: drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf' In fastrpc_req_mmap() error path, the fastrpc buffer is freed in fastrpc_req_munmap_impl() if unmap is successful. But in the end, there is an unconditional call to fastrpc_buf_free(). So the above case triggers the double free of fastrpc buf. | ||||
| CVE-2024-46712 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Disable coherent dumb buffers without 3d Coherent surfaces make only sense if the host renders to them using accelerated apis. Without 3d the entire content of dumb buffers stays in the guest making all of the extra work they're doing to synchronize between guest and host useless. Configurations without 3d also tend to run with very low graphics memory limits. The pinned console fb, mob cursors and graphical login manager tend to run out of 16MB graphics memory that those guests use. Fix it by making sure the coherent dumb buffers are only used on configs with 3d enabled. | ||||
| CVE-2024-46708 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: qcom: x1e80100: Fix special pin offsets Remove the erroneus 0x100000 offset to prevent the boards from crashing on pin state setting, as well as for the intended state changes to take effect. | ||||
| CVE-2024-46706 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: mark last busy before uart_add_one_port With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel sometimes boot hang. It is because normal console still is not ready, but runtime suspend is called, so early console putchar will hang in waiting TRDE set in UARTSTAT. The lpuart driver has auto suspend delay set to 3000ms, but during uart_add_one_port, a child device serial ctrl will added and probed with its pm runtime enabled(see serial_ctrl.c). The runtime suspend call path is: device_add |-> bus_probe_device |->device_initial_probe |->__device_attach |-> pm_runtime_get_sync(dev->parent); |-> pm_request_idle(dev); |-> pm_runtime_put(dev->parent); So in the end, before normal console ready, the lpuart get runtime suspended. And earlycon putchar will hang. To address the issue, mark last busy just after pm_runtime_enable, three seconds is long enough to switch from bootconsole to normal console. | ||||
| CVE-2024-46704 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix spruious data race in __flush_work() When flushing a work item for cancellation, __flush_work() knows that it exclusively owns the work item through its PENDING bit. 134874e2eee9 ("workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items") added a read of @work->data to determine whether to use busy wait for BH work items that are being canceled. While the read is safe when @from_cancel, @work->data was read before testing @from_cancel to simplify code structure: data = *work_data_bits(work); if (from_cancel && !WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) { While the read data was never used if !@from_cancel, this could trigger KCSAN data race detection spuriously: ================================================================== BUG: KCSAN: data-race in __flush_work / __flush_work write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0: instrument_write include/linux/instrumented.h:41 [inline] ___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline] insert_wq_barrier kernel/workqueue.c:3790 [inline] start_flush_work kernel/workqueue.c:4142 [inline] __flush_work+0x30b/0x570 kernel/workqueue.c:4178 flush_work kernel/workqueue.c:4229 [inline] ... read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1: __flush_work+0x42a/0x570 kernel/workqueue.c:4188 flush_work kernel/workqueue.c:4229 [inline] flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251 ... value changed: 0x0000000000400000 -> 0xffff88810006c00d Reorganize the code so that @from_cancel is tested before @work->data is accessed. The only problem is triggering KCSAN detection spuriously. This shouldn't need READ_ONCE() or other access qualifiers. No functional changes. | ||||
| CVE-2024-46703 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "serial: 8250_omap: Set the console genpd always on if no console suspend" This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940. Kevin reported that this causes a crash during suspend on platforms that dont use PM domains. | ||||
| CVE-2024-46701 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libfs: fix infinite directory reads for offset dir After we switch tmpfs dir operations from simple_dir_operations to simple_offset_dir_operations, every rename happened will fill new dentry to dest dir's maple tree(&SHMEM_I(inode)->dir_offsets->mt) with a free key starting with octx->newx_offset, and then set newx_offset equals to free key + 1. This will lead to infinite readdir combine with rename happened at the same time, which fail generic/736 in xfstests(detail show as below). 1. create 5000 files(1 2 3...) under one dir 2. call readdir(man 3 readdir) once, and get one entry 3. rename(entry, "TEMPFILE"), then rename("TEMPFILE", entry) 4. loop 2~3, until readdir return nothing or we loop too many times(tmpfs break test with the second condition) We choose the same logic what commit 9b378f6ad48cf ("btrfs: fix infinite directory reads") to fix it, record the last_index when we open dir, and do not emit the entry which index >= last_index. The file->private_data now used in offset dir can use directly to do this, and we also update the last_index when we llseek the dir file. [brauner: only update last_index after seek when offset is zero like Jan suggested] | ||||
| CVE-2024-46699 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Disable preemption while updating GPU stats We forgot to disable preemption around the write_seqcount_begin/end() pair while updating GPU stats: [ ] WARNING: CPU: 2 PID: 12 at include/linux/seqlock.h:221 __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched] <...snip...> [ ] Call trace: [ ] __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] v3d_job_start_stats.isra.0+0x90/0x218 [v3d] [ ] v3d_bin_job_run+0x23c/0x388 [v3d] [ ] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ ] process_one_work+0x62c/0xb48 [ ] worker_thread+0x468/0x5b0 [ ] kthread+0x1c4/0x1e0 [ ] ret_from_fork+0x10/0x20 Fix it. | ||||
| CVE-2024-46693 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink: Fix race during initialization As pointed out by Stephen Boyd it is possible that during initialization of the pmic_glink child drivers, the protection-domain notifiers fires, and the associated work is scheduled, before the client registration returns and as a result the local "client" pointer has been initialized. The outcome of this is a NULL pointer dereference as the "client" pointer is blindly dereferenced. Timeline provided by Stephen: CPU0 CPU1 ---- ---- ucsi->client = NULL; devm_pmic_glink_register_client() client->pdr_notify(client->priv, pg->client_state) pmic_glink_ucsi_pdr_notify() schedule_work(&ucsi->register_work) <schedule away> pmic_glink_ucsi_register() ucsi_register() pmic_glink_ucsi_read_version() pmic_glink_ucsi_read() pmic_glink_ucsi_read() pmic_glink_send(ucsi->client) <client is NULL BAD> ucsi->client = client // Too late! This code is identical across the altmode, battery manager and usci child drivers. Resolve this by splitting the allocation of the "client" object and the registration thereof into two operations. This only happens if the protection domain registry is populated at the time of registration, which by the introduction of commit '1ebcde047c54 ("soc: qcom: add pd-mapper implementation")' became much more likely. | ||||
| CVE-2024-46692 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Mark get_wq_ctx() as atomic call Currently get_wq_ctx() is wrongly configured as a standard call. When two SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to resume the corresponding sleeping thread. But if get_wq_ctx() is interrupted, goes to sleep and another SMC call is waiting to be allocated a waitq context, it leads to a deadlock. To avoid this get_wq_ctx() must be an atomic call and can't be a standard SMC call. Hence mark get_wq_ctx() as a fast call. | ||||
| CVE-2024-46688 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com | ||||