Export limit exceeded: 381219 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 381219 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381219 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74471 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded. | ||||
| CVE-2026-74470 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. | ||||
| CVE-2026-74468 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pch: use raw_spinlock_t for the register lock pch_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. This was confirmed on a PREEMPT_RT kernel with lockdep (PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored pch_irq_type()'s locking and drove it through the real genirq carrier irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e. the same __irq_set_trigger() edge that __setup_irq() takes for a requested IRQ. With the original spin_lock_irqsave() edge lockdep reported an invalid wait context, immediately followed by: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60 rt_spin_lock+0x3a/0x1c0 repro_irq_set_type+0x64/0xa0 [pch_repro] __irq_set_trigger+0x69/0x140 irq_set_irq_type+0x78/0xd0 Switching the mirrored lock to raw_spinlock_t made both splats go away. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, but all of those critical sections only perform MMIO register accesses (ioread32()/iowrite32()) and irq_set_handler_locked(); none of them contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same class of issue and fix as recently addressed for other GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use raw_spinlock_t in the irq startup path"). | ||||
| CVE-2026-74467 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Check CAP_NET_ADMIN for private ioctls Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN capable check to ensure unprivileged users cannot invoke them. | ||||
| CVE-2026-74465 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-18193 | 1 Ibm | 1 I | 2026-08-19 | 8.9 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to bypass security restrictions due to improper validation of user-controlled addresses. | ||||
| CVE-2026-74463 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO expander handling LEDs) can hold the I2C adapter lock. Inside this parallel transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host controller's input clock to calculate bus timings. This call attempts to acquire the blocked CCF 'prepare_lock', creating a circular dependency that freezes the system. The jz4780 host controller clock itself is static and never changes at runtime. However, calling clk_get_rate() inside the active transfer path introduces an unnecessary dependency on the CCF internal locks. Eliminate this synchronous clk_get_rate() call from the active transfer path by caching the static host peripheral clock rate once - inside the private jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed() to use this cached value, safely decoupling active I2C transactions from the CCF internal locks without any risk of stale timings. Assisted-by web based Google AI (pinpointing the bug and writing the message). | ||||
| CVE-2026-74459 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX coherent buffer is freed before leaving the callback. | ||||
| CVE-2026-17476 | 1 Ibm | 1 I | 2026-08-19 | 4.8 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an improper buffer write. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74456 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation"). | ||||
| CVE-2026-74454 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. | ||||
| CVE-2026-74446 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. The caller already holds p->mutex and the create/destroy paths never take p->mutex, so the p->mutex -> p->event_mutex order is not inverted and no deadlock is introduced. (cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) | ||||
| CVE-2026-74444 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | ||||
| CVE-2026-74443 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. | ||||
| CVE-2026-18101 | 1 Ibm | 1 I | 2026-08-19 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to gain elevated privileges due to improper management of thread authority swaps. | ||||
| CVE-2026-72237 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/brs: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries such as SYSRET/interrupt returns for which the branch-from addresses are in the kernel. E.g. $ perf record -j any,u -c 4000 -e branch-brs -o - -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//- 0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//- 0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//- ... BRS provides no hardware branch filtering, so privilege level filtering is performed entirely in software. However, amd_brs_match_plm() only validates the branch-to address against the requested privilege levels. For branches from the kernel to user space, the branch-from address is left unchecked and is leaked. Extend the software filter to also validate the branch-from address, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-72181 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mips: sched: Fix CPUMASK_OFFSTACK memory corruption This patch addresses a critical memory management flaw. When CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer. Consequently, sizeof(new_mask) evaluates to the pointer size, causing copy_from_user() to clobber the mask pointer. Furthermore, the old logic performed copy_from_user() before allocating the mask. Fix this by allocating new_mask first. To handle variable-sized user masks correctly, use cpumask_size() to truncate overly large user masks or pad undersized masks with zeros before copying the data directly into the allocated buffer. | ||||
| CVE-2026-72146 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interrupt is requested, the interrupt handler may run immediately. Since the IRQ handler can access channel->ch_base, which is initialized only after requesting the IRQ, this may lead to invalid memory access. Likewise, the IRQ thread may access uninitialized data (the ld_free, ld_queue, and ld_active lists), which may also lead to issues. Request the interrupts only after everything is set up. To keep the error path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent(). | ||||