Export limit exceeded: 374345 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (374345 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-56723 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | ||||
| CVE-2024-56722 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix cpu stuck caused by printings during reset During reset, cmd to destroy resources such as qp, cq, and mr may fail, and error logs will be printed. When a large number of resources are destroyed, there will be lots of printings, and it may lead to a cpu stuck. Delete some unnecessary printings and replace other printing functions in these paths with the ratelimited version. | ||||
| CVE-2024-56716 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash. | ||||
| CVE-2024-56708 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Avoid segmentation fault on module unload The segmentation fault happens because: During modprobe: 1. In igen6_probe(), igen6_pvt will be allocated with kzalloc() 2. In igen6_register_mci(), mci->pvt_info will point to &igen6_pvt->imc[mc] During rmmod: 1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info) 2. In igen6_remove(), it will kfree(igen6_pvt); Fix this issue by setting mci->pvt_info to NULL to avoid the double kfree. | ||||
| CVE-2024-56707 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dmac_flt.c Add error pointer checks after calling otx2_mbox_get_rsp(). | ||||
| CVE-2024-56701 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore The dtl_access_lock needs to be a rw_sempahore, a sleeping lock, because the code calls kmalloc() while holding it, which can sleep: # echo 1 > /proc/powerpc/vcpudispatch_stats BUG: sleeping function called from invalid context at include/linux/sched/mm.h:337 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 199, name: sh preempt_count: 1, expected: 0 3 locks held by sh/199: #0: c00000000a0743f8 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x324/0x438 #1: c0000000028c7058 (dtl_enable_mutex){+.+.}-{3:3}, at: vcpudispatch_stats_write+0xd4/0x5f4 #2: c0000000028c70b8 (dtl_access_lock){+.+.}-{2:2}, at: vcpudispatch_stats_write+0x220/0x5f4 CPU: 0 PID: 199 Comm: sh Not tainted 6.10.0-rc4 #152 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace: dump_stack_lvl+0x130/0x148 (unreliable) __might_resched+0x174/0x410 kmem_cache_alloc_noprof+0x340/0x3d0 alloc_dtl_buffers+0x124/0x1ac vcpudispatch_stats_write+0x2a8/0x5f4 proc_reg_write+0xf4/0x150 vfs_write+0xfc/0x438 ksys_write+0x88/0x148 system_call_exception+0x1c4/0x5a0 system_call_common+0xf4/0x258 | ||||
| CVE-2024-56700 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: wl128x: Fix atomicity violation in fmc_send_cmd() Atomicity violation occurs when the fmc_send_cmd() function is executed simultaneously with the modification of the fmdev->resp_skb value. Consider a scenario where, after passing the validity check within the function, a non-null fmdev->resp_skb variable is assigned a null value. This results in an invalid fmdev->resp_skb variable passing the validity check. As seen in the later part of the function, skb = fmdev->resp_skb; when the invalid fmdev->resp_skb passes the check, a null pointer dereference error may occur at line 478, evt_hdr = (void *)skb->data; To address this issue, it is recommended to include the validity check of fmdev->resp_skb within the locked section of the function. This modification ensures that the value of fmdev->resp_skb does not change during the validation process, thereby maintaining its validity. This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. | ||||
| CVE-2024-56698 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix looping of queued SG entries The dwc3_request->num_queued_sgs is decremented on completion. If a partially completed request is handled, then the dwc3_request->num_queued_sgs no longer reflects the total number of num_queued_sgs (it would be cleared). Correctly check the number of request SG entries remained to be prepare and queued. Failure to do this may cause null pointer dereference when accessing non-existent SG entry. | ||||
| CVE-2024-56693 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: brd: defer automatic disk creation until module initialization succeeds My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. | ||||
| CVE-2024-56691 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | ||||
| CVE-2024-56690 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY Since commit 8f4f68e788c3 ("crypto: pcrypt - Fix hungtask for PADATA_RESET"), the pcrypt encryption and decryption operations return -EAGAIN when the CPU goes online or offline. In alg_test(), a WARN is generated when pcrypt_aead_decrypt() or pcrypt_aead_encrypt() returns -EAGAIN, the unnecessary panic will occur when panic_on_warn set 1. Fix this issue by calling crypto layer directly without parallelization in that case. | ||||
| CVE-2024-56687 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: Fix hardware lockup on first Rx endpoint request There is a possibility that a request's callback could be invoked from usb_ep_queue() (call trace below, supplemented with missing calls): req->complete from usb_gadget_giveback_request (drivers/usb/gadget/udc/core.c:999) usb_gadget_giveback_request from musb_g_giveback (drivers/usb/musb/musb_gadget.c:147) musb_g_giveback from rxstate (drivers/usb/musb/musb_gadget.c:784) rxstate from musb_ep_restart (drivers/usb/musb/musb_gadget.c:1169) musb_ep_restart from musb_ep_restart_resume_work (drivers/usb/musb/musb_gadget.c:1176) musb_ep_restart_resume_work from musb_queue_resume_work (drivers/usb/musb/musb_core.c:2279) musb_queue_resume_work from musb_gadget_queue (drivers/usb/musb/musb_gadget.c:1241) musb_gadget_queue from usb_ep_queue (drivers/usb/gadget/udc/core.c:300) According to the docstring of usb_ep_queue(), this should not happen: "Note that @req's ->complete() callback must never be called from within usb_ep_queue() as that can create deadlock situations." In fact, a hardware lockup might occur in the following sequence: 1. The gadget is initialized using musb_gadget_enable(). 2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an interrupt. 3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an empty queue (next_request() returns NULL). The interrupt flag has already been cleared by the glue layer handler, but the RXPKTRDY flag remains set. 4. The first request is enqueued using usb_ep_queue(), leading to the call of req->complete(), as shown in the call trace above. 5. If the callback enables IRQs and another packet is waiting, step (3) repeats. The request queue is empty because usb_g_giveback() removes the request before invoking the callback. 6. The endpoint remains locked up, as the interrupt triggered by hardware setting the RXPKTRDY flag has been handled, but the flag itself remains set. For this scenario to occur, it is only necessary for IRQs to be enabled at some point during the complete callback. This happens with the USB Ethernet gadget, whose rx_complete() callback calls netif_rx(). If called in the task context, netif_rx() disables the bottom halves (BHs). When the BHs are re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The gadget itself is initialized at module load (or at boot if built-in), but the first request is enqueued when the network interface is brought up, triggering rx_complete() in the task context via ioctl(). If a packet arrives while the interface is down, it can prevent the interface from receiving any further packets from the USB host. The situation is quite complicated with many parties involved. This particular issue can be resolved in several possible ways: 1. Ensure that callbacks never enable IRQs. This would be difficult to enforce, as discovering how netif_rx() interacts with interrupts was already quite challenging and u_ether is not the only function driver. Similar "bugs" could be hidden in other drivers as well. 2. Disable MUSB interrupts in musb_g_giveback() before calling the callback and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(), for example). This would ensure that MUSB interrupts are not handled during the callback, even if IRQs are enabled. In fact, it would allow IRQs to be enabled when releasing the lock. However, this feels like an inelegant hack. 3. Modify the interrupt handler to clear the RXPKTRDY flag if the request queue is empty. While this approach also feels like a hack, it wastes CPU time by attempting to handle incoming packets when the software is not ready to process them. 4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart(). This ensures that the hardware can receive packets when there is at least one request in the queue. Once I ---truncated--- | ||||
| CVE-2024-56683 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Avoid hang with debug registers when suspended Trying to read /sys/kernel/debug/dri/1/hdmi1_regs when the hdmi is disconnected results in a fatal system hang. This is due to the pm suspend code disabling the dvp clock. That is just a gate of the 108MHz clock in DVP_HT_RPI_MISC_CONFIG, which results in accesses hanging AXI bus. Protect against this. | ||||
| CVE-2024-56679 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.c Add error pointer check after calling otx2_mbox_get_rsp(). | ||||
| CVE-2024-56678 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/mm/fault: Fix kfence page fault reporting copy_from_kernel_nofault() can be called when doing read of /proc/kcore. /proc/kcore can have some unmapped kfence objects which when read via copy_from_kernel_nofault() can cause page faults. Since *_nofault() functions define their own fixup table for handling fault, use that instead of asking kfence to handle such faults. Hence we search the exception tables for the nip which generated the fault. If there is an entry then we let the fixup table handler handle the page fault by returning an error from within ___do_page_fault(). This can be easily triggered if someone tries to do dd from /proc/kcore. eg. dd if=/proc/kcore of=/dev/null bs=1M Some example false negatives: =============================== BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0 Invalid read at 0xc0000000fdff0000: copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0 Use-after-free read at 0xc0000000fe050000 (in kfence-#2): copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec | ||||
| CVE-2024-56675 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU protection. But it is possible to attach a non-sleepable BPF program to a uprobe, and non-sleepable BPF programs are freed via normal RCU (see __bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal RCU grace period does not imply a tasks-trace-RCU grace period. Fix it by explicitly waiting for a tasks-trace-RCU grace period after removing the attachment of a bpf_prog to a perf_event. | ||||
| CVE-2024-56670 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 | ||||
| CVE-2024-56665 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog Syzbot reported [1] crash that happens for following tracing scenario: - create tracepoint perf event with attr.inherit=1, attach it to the process and set bpf program to it - attached process forks -> chid creates inherited event the new child event shares the parent's bpf program and tp_event (hence prog_array) which is global for tracepoint - exit both process and its child -> release both events - first perf_event_detach_bpf_prog call will release tp_event->prog_array and second perf_event_detach_bpf_prog will crash, because tp_event->prog_array is NULL The fix makes sure the perf_event_detach_bpf_prog checks prog_array is valid before it tries to remove the bpf program from it. [1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad | ||||
| CVE-2024-56660 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, prevent potential error pointer dereference The dr_domain_add_vport_cap() function generally returns NULL on error but sometimes we want it to return ERR_PTR(-EBUSY) so the caller can retry. The problem here is that "ret" can be either -EBUSY or -ENOMEM and if it's and -ENOMEM then the error pointer is propogated back and eventually dereferenced in dr_ste_v0_build_src_gvmi_qpn_tag(). | ||||
| CVE-2024-56659 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lapb: increase LAPB_HEADER_LEN It is unclear if net/lapb code is supposed to be ready for 8021q. We can at least avoid crashes like the following : skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282 RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60 R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140 R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016 FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 nr_header+0x36/0x320 net/netrom/nr_dev.c:69 dev_hard_header include/linux/netdevice.h:3148 [inline] vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83 dev_hard_header include/linux/netdevice.h:3148 [inline] lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149 lapb_establish_data_link+0x84/0xd0 lapb_device_event+0x4e0/0x670 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922 devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x158/0x460 net/socket.c:1227 sock_ioctl+0x626/0x8e0 net/socket.c:1346 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 | ||||