Export limit exceeded: 385751 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 385751 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (385751 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53059 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count. | ||||
| CVE-2026-53006 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-09-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call. | ||||
| CVE-2026-52923 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. | ||||
| CVE-2026-4813 | 1 Lutece | 1 Lutece Core | 2026-09-01 | N/A |
| A vulnerability in the Lutece Core XSL export management module up to version 7.1.7, which allows authenticated administrators to execute code remotely. The XML/XSLT processing configuration does not enable secure processing mode (FEATURE_SECURE_PROCESSING), allowing Java extension functions to be executed from malicious XSL stylesheets. An attacker with administrator privileges can upload a manipulated XSL transformation file and trigger its execution during user export operations, resulting in the execution of arbitrary code on the server. | ||||
| CVE-2026-48746 | 2 Vllm, Vllm-project | 2 Vllm, Vllm | 2026-09-01 | 9.1 Critical |
| vLLM is an inference and serving engine for large language models (LLMs). From 0.3.0 until 0.22.0, a vulnerability in ASGI web servers and starlette's trust on those web servers enables an authentication bypass of the OpenAI API AuthenticationMiddleware. It allows to use the API without providing the configured VLLM_API_KEY or --api-key. This vulnerability is fixed in 0.22.0. | ||||
| CVE-2026-45984 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] | ||||
| CVE-2026-44990 | 1 Apostrophecms | 1 Sanitize-html | 2026-09-01 | 9.3 Critical |
| ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue. | ||||
| CVE-2026-42151 | 1 Prometheus | 1 Prometheus | 2026-09-01 | 7.5 High |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3. | ||||
| CVE-2026-40192 | 2 Python, Python-pillow | 2 Pillow, Pillow | 2026-09-01 | 7.5 High |
| Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround. | ||||
| CVE-2026-33810 | 2 Go Standard Library, Golang | 2 Crypto/x509, Go | 2026-09-01 | 7.5 High |
| When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool. | ||||
| CVE-2026-32280 | 2 Go Standard Library, Golang | 2 Crypto/x509, Go | 2026-09-01 | 7.5 High |
| During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls. | ||||
| CVE-2026-21441 | 2 Python, Urllib3 | 2 Urllib3, Urllib3 | 2026-09-01 | 7.5 High |
| urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source. | ||||
| CVE-2026-13735 | 1 Zephyrproject | 1 Zephyr | 2026-09-01 | 3.7 Low |
| Zephyr's WireGuard implementation in subsys/net/lib/wireguard/wg_crypto.c mishandled keepalive packets. In wg_process_data_message(), any type-4 transport-data message whose payload was exactly 16 bytes (an empty plaintext plus a bare Poly1305 tag, i.e. a keepalive) was accepted and returned immediately, before wg_decrypt_packet() was ever called. The Poly1305 authentication tag was therefore never verified; the only preceding gates were a cleartext receiver-index lookup (get_peer_keypair_for_index() on the attacker-supplied data_hdr->receiver) and a non-cryptographic keypair validity/expiry check. The path is reachable entirely from the network: inbound UDP on the WireGuard port is dispatched by wg_input() to handle_transport_data() and then wg_process_data_message(). The 32-bit receiver index is transmitted in cleartext in WireGuard handshake and data messages, so an on-path observer learns it directly and an off-path attacker can brute-force it against the UDP port. Given an active receiving-valid session for that index, an attacker could send a 16-byte garbage payload and have it accepted without possessing the session key. On acceptance the unauthenticated message caused the management layer to observe a spoofed NET_EVENT_VPN_CONNECTED signal (setting peer->first_valid and notifying any net_mgmt listener) and incremented the keepalive-RX statistic. The impact is limited to integrity of this status signal: no plaintext is decrypted or injected, no key is disclosed, and the early-return path did not update the peer endpoint or liveness timers, so there is no traffic-injection, session-takeover, or availability consequence. The fix removes the pre-decrypt early return so a 16-byte payload flows through wg_decrypt_packet(), which verifies the Poly1305 tag over the empty plaintext, followed by the existing anti-replay check; only an authenticated, non-replayed message is then recognised as a keepalive. Forged keepalives now fail the tag check and are counted as decrypt failures. | ||||
| CVE-2026-13734 | 1 Zephyrproject | 1 Zephyr | 2026-09-01 | 6.5 Medium |
| Zephyr's WireGuard VPN data-plane receive handler wg_process_data_message() in subsys/net/lib/wireguard/wg_crypto.c validated the anti-replay counter too late. After AEAD decryption of a MESSAGE_TRANSPORT_DATA packet succeeded, the code committed several peer-state changes — update_peer_addr() (endpoint roaming update), the keypair->last_rx/peer->last_rx liveness timers, and keypair_update() (promote next→current and destroy the previous keypair) — and only afterward called wg_check_replay(). On a replayed packet the replay check returned -EINVAL, but none of the preceding mutations were rolled back. The AEAD tag authenticates content but not freshness, so a replayed-but-authentic transport packet decrypts correctly. An attacker who captures one valid ciphertext off the wire (an on-path or shared-medium observer) can re-inject it from an arbitrary spoofed source address. Reaching the handler requires no credentials: it is driven directly from inbound UDP datagrams via the dispatch in subsys/net/lib/wireguard/wg.c. Because the state mutations committed before the replay check, the replay repoints the peer endpoint to the attacker-chosen source address (roaming hijack), redirecting the victim's subsequent outbound tunnel traffic until the legitimate peer's next packet re-corrects it; it also prematurely destroys the previous keypair and refreshes the RX liveness timer. The tunnel payload stays encrypted under the session keypair, so this is an integrity/availability impact (traffic redirection and session disruption), not payload disclosure. The fix moves wg_check_replay() to immediately after a successful decrypt, before any peer-state mutation, matching the WireGuard specification and the Linux reference implementation. | ||||
| CVE-2026-10420 | 2026-09-01 | 5.5 Medium | ||
| Untrusted pointer dereference vulnerability in Samsung Open Source mTower allows Pointer Manipulation. This issue affects mTower: before 102d3dc75cf8e58e68e4bea54ae3c803992c91be. | ||||
| CVE-2026-0994 | 2 Google, Protobuf | 3 Protobuf, Protobuf-python, Protobuf | 2026-09-01 | 7.5 High |
| A denial-of-service (DoS) vulnerability exists in google.protobuf.json_format.ParseDict() in Python, where the max_recursion_depth limit can be bypassed when parsing nested google.protobuf.Any messages. Due to missing recursion depth accounting inside the internal Any-handling logic, an attacker can supply deeply nested Any structures that bypass the intended recursion limit, eventually exhausting Python’s recursion stack and causing a RecursionError. | ||||
| CVE-2025-69223 | 3 Aio-libs, Aio-libs Project, Aiohttp | 4 Aiohttp Session, Aiohttp, Aio-libs and 1 more | 2026-09-01 | 7.5 High |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3. | ||||
| CVE-2025-15613 | 1 Kyverno | 1 Kyverno | 2026-09-01 | 6.5 Medium |
| Kyverno before v1.13.4 is vulnerable to server-side request forgery (SSRF) via its Service Call functionality. An attacker with permission to create Kyverno (Cluster)Policies can specify an external URL in a policy's apiCall/service configuration; although Service Call is documented for in-cluster services, it also resolves external addresses, allowing requests to an attacker-controlled server. Because policy context data (including contents of Kubernetes resources such as secrets) is sent in these requests, an attacker can exfiltrate sensitive cluster data. | ||||
| CVE-2024-0682 | 2 Sivel, Theandystratton | 2 Page Restrict, Page Restrict | 2026-09-01 | 5.3 Medium |
| The Page Restrict plugin for WordPress is vulnerable to information disclosure in all versions up to, and including, 2.5.5. This is due to the plugin not properly restricting access to posts via the REST API when a page has been made private. This makes it possible for unauthenticated attackers to view protected posts. | ||||
| CVE-2024-24702 | 1 Sivel | 1 Page Restrict | 2026-09-01 | 4.3 Medium |
| Cross-Site Request Forgery (CSRF) vulnerability in Matt Martz & Andy Stratton Page Restrict.This issue affects Page Restrict: from n/a through 2.5.5. | ||||