Export limit exceeded: 47326 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47326 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-65567 | 2 Omec-project, Opennetworking | 2 Upf, Upf | 2026-01-07 | 7.5 High |
| A denial-of-service vulnerability exists in the omec-project UPF (pfcpiface component) in version upf-epc-pfcpiface:2.1.3-dev. After PFCP association, a specially crafted PFCP Session Establishment Request with a CreatePDR that contains a malformed Flow-Description is not robustly validated. The Flow-Description parser (parseFlowDesc) can read beyond the bounds of the provided buffer, causing a panic and terminating the UPF process. An attacker who can send PFCP Session Establishment Request messages to the UPF's N4/PFCP endpoint can exploit this issue to repeatedly crash the UPF. | ||||
| CVE-2025-65834 | 1 Meltytech | 1 Shotcut | 2026-01-07 | 9.8 Critical |
| Meltytech Shotcut 25.10.31 is vulnerable to Buffer Overflow. A memory access violation occurs when processing MLT project files with manipulated width and height parameters. By setting these values to extremely large numbers, the application attempts to allocate excessive memory during image processing, triggering a buffer overflow in the mlt_image_fill_white function. | ||||
| CVE-2025-65562 | 1 Free5gc | 2 Free5gc, Upf | 2026-01-07 | 7.5 High |
| The free5GC UPF suffers from a lack of bounds checking on the SEID when processing PFCP Session Deletion Requests. An unauthenticated remote attacker can send a request with a very large SEID (e.g., 0xFFFFFFFFFFFFFFFF) that causes an integer conversion/underflow in LocalNode.DeleteSess() / LocalNode.Sess() when a uint64 SEID is converted to int and used in index arithmetic. This leads to a negative index into n.sess and a Go runtime panic, resulting in a denial of service (UPF crash). The issue has been reproduced on free5GC v4.1.0 with crashes observed in the session lookup/deletion path in internal/pfcp/node.go; other versions may also be affected. No authentication is required. | ||||
| CVE-2025-14535 | 1 Utt | 2 512w, 512w Firmware | 2026-01-07 | 9.8 Critical |
| A vulnerability was identified in UTT 进取 512W up to 3.1.7.7-171114. Affected is the function strcpy of the file /goform/formConfigFastDirectionW. The manipulation of the argument ssid leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-14534 | 1 Utt | 2 512w, 512w Firmware | 2026-01-07 | 9.8 Critical |
| A vulnerability was determined in UTT 进取 512W up to 3.1.7.7-171114. This impacts the function strcpy of the file /goform/formNatStaticMap of the component Endpoint. Executing manipulation of the argument NatBind can lead to buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-38529 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: aio_iiro_16: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & 0xdcfc) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. | ||||
| CVE-2025-38530 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: pcl812: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & board->irq_bits) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. | ||||
| CVE-2023-51791 | 2 Fedoraproject, Ffmpeg | 2 Fedora, Ffmpeg | 2026-01-07 | 7.8 High |
| Buffer Overflow vulenrability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavcodec/jpegxl_parser.c in gen_alias_map. | ||||
| CVE-2023-51793 | 1 Ffmpeg | 1 Ffmpeg | 2026-01-07 | 7.8 High |
| Buffer Overflow vulnerability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavutil/imgutils.c:353:9 in image_copy_plane. | ||||
| CVE-2025-38497 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: Fix OOB read on empty string write When writing an empty string to either 'qw_sign' or 'landingPage' sysfs attributes, the store functions attempt to access page[l - 1] before validating that the length 'l' is greater than zero. This patch fixes the vulnerability by adding a check at the beginning of os_desc_qw_sign_store() and webusb_landingPage_store() to handle the zero-length input case gracefully by returning immediately. | ||||
| CVE-2025-38483 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: das16m1: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: /* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */ if ((1 << it->options[1]) & 0xdcfc) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. | ||||
| CVE-2025-38482 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: das6402: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: /* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */ if ((1 << it->options[1]) & 0x8cec) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. | ||||
| CVE-2025-15270 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 8.8 High |
| FontForge SFD File Parsing Improper Validation of Array Index Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SFD files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated array. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28563. | ||||
| CVE-2025-15271 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 8.8 High |
| FontForge SFD File Parsing Improper Validation of Array Index Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SFD files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated array. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28562. | ||||
| CVE-2025-15272 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 8.8 High |
| FontForge SFD File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SFD files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28547. | ||||
| CVE-2025-15273 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 8.8 High |
| FontForge PFB File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PFB files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28546. | ||||
| CVE-2025-15274 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 8.8 High |
| FontForge SFD File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SFD files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28544. | ||||
| CVE-2025-15275 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 8.8 High |
| FontForge SFD File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SFD files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28543. | ||||
| CVE-2025-15277 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 7.8 High |
| FontForge GUtils SGI File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of scanlines within SGI files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27920. | ||||
| CVE-2025-15278 | 1 Fontforge | 1 Fontforge | 2026-01-07 | 7.8 High |
| FontForge GUtils XBM File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of pixels within XBM files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27865. | ||||