Export limit exceeded: 374100 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (374100 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-50180 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: sisfb: Fix strbuf array overflow The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-50112 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/lam: Disable ADDRESS_MASKING in most cases Linear Address Masking (LAM) has a weakness related to transient execution as described in the SLAM paper[1]. Unless Linear Address Space Separation (LASS) is enabled this weakness may be exploitable. Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST, or when speculation mitigations have been disabled at compile time, otherwise keep LAM disabled. There are no processors in market that support LAM yet, so currently nobody is affected by this issue. [1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf [2] LASS: https://lore.kernel.org/lkml/20230609183632.48706-1-alexander.shishkin@linux.intel.com/ [ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ] | ||||
| CVE-2024-50073 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: Fix use-after-free in gsm_cleanup_mux BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] Read of size 8 at addr ffff88815fe99c00 by task poc/3379 CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: <TASK> gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] __pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm] __pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389 update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500 __pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846 __rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161 gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] _raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107 __pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm] ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195 ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79 __pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338 __pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805 tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 Allocated by task 65: gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm] gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm] gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm] gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm] tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391 tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39 flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445 process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229 worker_thread+0x3dc/0x950 kernel/workqueue.c:3391 kthread+0x2a3/0x370 kernel/kthread.c:389 ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257 Freed by task 3367: kfree+0x126/0x420 mm/slub.c:4580 gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 [Analysis] gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux can be freed by multi threads through ioctl,which leads to the occurrence of uaf. Protect it by gsm tx lock. | ||||
| CVE-2024-50056 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix ERR_PTR dereference in uvc_v4l2.c Fix potential dereferencing of ERR_PTR() in find_format_by_pix() and uvc_v4l2_enum_format(). Fix the following smatch errors: drivers/usb/gadget/function/uvc_v4l2.c:124 find_format_by_pix() error: 'fmtdesc' dereferencing possible ERR_PTR() drivers/usb/gadget/function/uvc_v4l2.c:392 uvc_v4l2_enum_format() error: 'fmtdesc' dereferencing possible ERR_PTR() Also, fix similar issue in uvc_v4l2_try_format() for potential dereferencing of ERR_PTR(). | ||||
| CVE-2024-50017 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/ident_map: Use gbpages only where full GB page should be mapped. When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. | ||||
| CVE-2024-49992 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/stm: Avoid use-after-free issues with crtc and plane ltdc_load() calls functions drm_crtc_init_with_planes(), drm_universal_plane_init() and drm_encoder_init(). These functions should not be called with parameters allocated with devm_kzalloc() to avoid use-after-free issues [1]. Use allocations managed by the DRM framework. Found by Linux Verification Center (linuxtesting.org). [1] https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/ | ||||
| CVE-2024-49937 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Set correct chandef when starting CAC When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC. Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC. Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24 [shorten subject, remove OCB, reorder cases to match previous list] | ||||
| CVE-2024-49935 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: PAD: fix crash in exit_round_robin() The kernel occasionally crashes in cpumask_clear_cpu(), which is called within exit_round_robin(), because when executing clear_bit(nr, addr) with nr set to 0xffffffff, the address calculation may cause misalignment within the memory, leading to access to an invalid memory address. ---------- BUG: unable to handle kernel paging request at ffffffffe0740618 ... CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1 ... RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad] Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31 RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? acpi_pad_add+0x120/0x120 [acpi_pad] kthread+0x10b/0x130 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x40 ... CR2: ffffffffe0740618 crash> dis -lr ffffffffc0726923 ... /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114 0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325 0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80 0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits> crash> px tsk_in_cpu[14] $66 = 0xffffffff crash> px 0xffffffffc072692c+0x19cf4 $99 = 0xffffffffc0740620 crash> sym 0xffffffffc0740620 ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad] crash> px pad_busy_cpus_bits[0] $42 = 0xfffc0 ---------- To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling cpumask_clear_cpu() in exit_round_robin(), just as it is done in round_robin_cpu(). [ rjw: Subject edit, avoid updates to the same value ] | ||||
| CVE-2024-49927 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully. | ||||
| CVE-2024-49926 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb() For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is defined as NR_CPUS instead of the number of possible cpus, this will cause the following system panic: smpboot: Allowing 4 CPUs, 0 hotplug CPUs ... setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 ... BUG: unable to handle page fault for address: ffffffff9911c8c8 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082 CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x23/0x80 ? page_fault_oops+0xa4/0x180 ? exc_page_fault+0x152/0x180 ? asm_exc_page_fault+0x26/0x40 ? rcu_tasks_need_gpcb+0x25d/0x2c0 ? __pfx_rcu_tasks_kthread+0x40/0x40 rcu_tasks_one_gp+0x69/0x180 rcu_tasks_kthread+0x94/0xc0 kthread+0xe8/0x140 ? __pfx_kthread+0x40/0x40 ret_from_fork+0x34/0x80 ? __pfx_kthread+0x40/0x40 ret_from_fork_asm+0x1b/0x80 </TASK> Considering that there may be holes in the CPU numbers, use the maximum possible cpu number, instead of nr_cpu_ids, for configuring enqueue and dequeue limits. [ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] | ||||
| CVE-2024-49891 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Validate hdwq pointers before dereferencing in reset/errata paths When the HBA is undergoing a reset or is handling an errata event, NULL ptr dereference crashes may occur in routines such as lpfc_sli_flush_io_rings(), lpfc_dev_loss_tmo_callbk(), or lpfc_abort_handler(). Add NULL ptr checks before dereferencing hdwq pointers that may have been freed due to operations colliding with a reset or errata event handler. | ||||
| CVE-2024-49868 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a NULL pointer dereference when failed to start a new trasacntion [BUG] Syzbot reported a NULL pointer dereference with the following crash: FAULT_INJECTION: forcing a failure. start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676 prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642 relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678 ... BTRFS info (device loop0): balance: ended with status: -12 Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667] RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926 Call Trace: <TASK> commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496 btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430 del_balance_item fs/btrfs/volumes.c:3678 [inline] reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742 btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] The allocation failure happens at the start_transaction() inside prepare_to_relocate(), and during the error handling we call unset_reloc_control(), which makes fs_info->balance_ctl to be NULL. Then we continue the error path cleanup in btrfs_balance() by calling reset_balance_state() which will call del_balance_item() to fully delete the balance item in the root tree. However during the small window between set_reloc_contrl() and unset_reloc_control(), we can have a subvolume tree update and created a reloc_root for that subvolume. Then we go into the final btrfs_commit_transaction() of del_balance_item(), and into btrfs_update_reloc_root() inside commit_fs_roots(). That function checks if fs_info->reloc_ctl is in the merge_reloc_tree stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer dereference. [FIX] Just add extra check on fs_info->reloc_ctl inside btrfs_update_reloc_root(), before checking fs_info->reloc_ctl->merge_reloc_tree. That DEAD_RELOC_TREE handling is to prevent further modification to the reloc tree during merge stage, but since there is no reloc_ctl at all, we do not need to bother that. | ||||
| CVE-2024-49858 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic. | ||||
| CVE-2024-47673 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pause TCM when the firmware is stopped Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30 | ||||
| CVE-2024-47670 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_xattr_find_entry() Add a paranoia check to make sure it doesn't stray beyond valid memory region containing ocfs2 xattr entries when scanning for a match. It will prevent out-of-bound access in case of crafted images. | ||||
| CVE-2024-47666 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Set phy->enable_completion only when we wait for it pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash. | ||||
| CVE-2024-47143 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_bucket() (A) dma_entry_hash check_sync() (A) radix_lock() (W) dma_entry_hash dma_entry_free() (W) radix_lock() // CPU2's one (W) rq_lock() CPU1 situation can happen when it extending radix tree and it tries to wake up kswapd via wake_all_kswapd(). CPU2 situation can happen while perf_event_task_sched_out() (i.e. dma sync operation is called while deleting perf_event using etm and etr tmc which are Arm Coresight hwtracing driver backends). To remove this possible situation, call dma_entry_free() after put_hash_bucket() in check_unmap(). | ||||
| CVE-2024-47141 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinmux: Use sequential access to access desc->pinmux data When two client of the same gpio call pinctrl_select_state() for the same functionality, we are seeing NULL pointer issue while accessing desc->mux_owner. Let's say two processes A, B executing in pin_request() for the same pin and process A updates the desc->mux_usecount but not yet updated the desc->mux_owner while process B see the desc->mux_usecount which got updated by A path and further executes strcmp and while accessing desc->mux_owner it crashes with NULL pointer. Serialize the access to mux related setting with a mutex lock. cpu0 (process A) cpu1(process B) pinctrl_select_state() { pinctrl_select_state() { pin_request() { pin_request() { ... .... } else { desc->mux_usecount++; desc->mux_usecount && strcmp(desc->mux_owner, owner)) { if (desc->mux_usecount > 1) return 0; desc->mux_owner = owner; } } | ||||
| CVE-2024-46841 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in walk_down_proc() We handle errors here properly, ENOMEM isn't fatal, return the error. | ||||
| CVE-2024-46840 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: clean up our handling of refs == 0 in snapshot delete In reada we BUG_ON(refs == 0), which could be unkind since we aren't holding a lock on the extent leaf and thus could get a transient incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which could happen if we have extent tree corruption. Change that to return -EUCLEAN. In do_walk_down() we catch this case and handle it correctly, however we return -EIO, which -EUCLEAN is a more appropriate error code. Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert that to proper error handling. Also adjust the error message so we can actually do something with the information. | ||||