Export limit exceeded: 401182 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 401182 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401182 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54101 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: driver: soc: xilinx: use _safe loop iterator to avoid a use after free The hash_for_each_possible() loop dereferences "eve_data" to get the next item on the list. However the loop frees eve_data so it leads to a use after free. Use hash_for_each_possible_safe() instead. | ||||
| CVE-2023-54102 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow A static code analysis tool flagged the possibility of buffer overflow when using copy_from_user() for a debugfs entry. Currently, it is possible that copy_from_user() copies more bytes than what would fit in the mybuf char array. Add a min() restriction check between sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect against buffer overflow. | ||||
| CVE-2023-54110 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: rndis_host: Secure rndis_query check against int overflow Variables off and len typed as uint32 in rndis_query function are controlled by incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently the response pointer will be referring to a location past the expected buffer boundaries allowing information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. | ||||
| CVE-2023-54111 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups of_find_node_by_phandle() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2023-54114 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment() As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. | ||||
| CVE-2025-5138 | 1 Bitwarden | 1 Bitwarden | 2026-04-15 | 3.5 Low |
| A vulnerability was found in Bitwarden up to 2.25.1. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the component PDF File Handler. The manipulation leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-5145 | 2026-04-15 | 6.3 Medium | ||
| A vulnerability, which was classified as critical, was found in Netcore NBR1005GPEV2, B6V2, COVER5, NAP830, NAP930, NBR100V2, NBR200V2 and POWER13 up to 20250508. This affects an unknown part of the file /www/cgi-bin/ of the component Query String Handler. The manipulation leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2023-54117 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dcssblk: fix kernel crash with list_add corruption Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. | ||||
| CVE-2023-54123 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix memleak for 'conf->bio_split' In the error path of raid10_run(), 'conf' need be freed, however, 'conf->bio_split' is missed and memory will be leaked. Since there are 3 places to free 'conf', factor out a helper to fix the problem. | ||||
| CVE-2025-5146 | 2026-04-15 | 6.3 Medium | ||
| A vulnerability has been found in Netcore NBR1005GPEV2, B6V2, COVER5, NAP830, NAP930, NBR100V2 and NBR200V2 up to 20250508 and classified as critical. This vulnerability affects the function passwd_set of the file /usr/bin/routerd of the component HTTP Header Handler. The manipulation of the argument pwd leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-5148 | 2026-04-15 | 5.3 Medium | ||
| A vulnerability was found in FunAudioLLM InspireMusic up to bf32364bcb0d136497ca69f9db622e9216b029dd. It has been classified as critical. Affected is the function load_state_dict of the file inspiremusic/cli/model.py of the component Pickle Data Handler. The manipulation leads to deserialization. An attack has to be approached locally. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The name of the patch is 784cbf8dde2cf1456ff808aeba23177e1810e7a9. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2023-54133 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: clean mc addresses in application firmware when closing port When moving devices from one namespace to another, mc addresses are cleaned in software while not removed from application firmware. Thus the mc addresses are remained and will cause resource leak. Now use `__dev_mc_unsync` to clean mc addresses when closing port. | ||||
| CVE-2023-54145 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: drop unnecessary user-triggerable WARN_ONCE in verifierl log It's trivial for user to trigger "verifier log line truncated" warning, as verifier has a fixed-sized buffer of 1024 bytes (as of now), and there are at least two pieces of user-provided information that can be output through this buffer, and both can be arbitrarily sized by user: - BTF names; - BTF.ext source code lines strings. Verifier log buffer should be properly sized for typical verifier state output. But it's sort-of expected that this buffer won't be long enough in some circumstances. So let's drop the check. In any case code will work correctly, at worst truncating a part of a single line output. | ||||
| CVE-2025-62181 | 1 Pegasystems | 1 Pega Infinity | 2026-04-15 | 5.3 Medium |
| Pega Platform versions 7.1.0 through Infinity 25.1.0 are affected by a User Enumeration. This issue occurs during user authentication process, where a difference in response time could allow a remote unauthenticated user to determine if a username is valid or not. This only applies to deprecated basic-authentication feature and other more secure authentication mechanisms are recommended. A fix is being provided in the 24.1.4, 24.2.4, and 25.1.1 patch releases. Please note: Basic credentials authentication service type is deprecated started in 24.2 version: https://docs.pega.com/bundle/platform/page/platform/release-notes/security/whats-new-security-242.html. | ||||
| CVE-2024-10207 | 2026-04-15 | N/A | ||
| A Server-Side Request Forgery vulnerability in the APROL Web Portal used in B&R APROL <4.4-00P5 may allow an authenticated network-based attacker to force the web server to request arbitrary URLs. | ||||
| CVE-2024-10208 | 2026-04-15 | N/A | ||
| An Improper Neutralization of Input During Web Page Generation vulnerability in the APROL Web Portal used in B&R APROL <4.4-00P5 may allow an authenticated network-based attacker to insert malicious code which is then executed in the context of the user’s browser session. | ||||
| CVE-2024-10209 | 2026-04-15 | N/A | ||
| An Incorrect Permission Assignment for Critical Resource vulnerability in the file system used in B&R APROL <4.4-01 may allow an authenticated local attacker to read and alter the configuration of another engineering or runtime user. | ||||
| CVE-2024-47865 | 1 Rakuten | 1 Turbo 5g Firmware | 2026-04-15 | 5.3 Medium |
| Missing authentication for critical function vulnerability exists in Rakuten Turbo 5G firmware version V1.3.18 and earlier. If this vulnerability is exploited, a remote unauthenticated attacker may update or downgrade the firmware on the device. | ||||
| CVE-2024-10210 | 2026-04-15 | N/A | ||
| An External Control of File Name or Path vulnerability in the APROL Web Portal used in B&R APROL <4.4-005P may allow an authenticated network-based attacker to access data from the file system. | ||||
| CVE-2025-52991 | 2026-04-15 | 3.2 Low | ||
| The Nix, Lix, and Guix package managers default to using temporary build directories in a world-readable and world-writable location. This allows standard users to deceive the package manager into using directories with pre-existing content, potentially leading to unauthorized actions or data manipulation. This affects Nix before 2.24.15, 2.26.4, 2.28.4, and 2.29.1; Lix before 2.91.2, 2.92.2, and 2.93.1; and Guix before 1.4.0-38.0e79d5b. | ||||