Export limit exceeded: 378568 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378568 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39763 | 1 Linux | 1 Linux Kernel | 2026-03-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered If a synchronous error is detected as a result of user-space process triggering a 2-bit uncorrected error, the CPU will take a synchronous error exception such as Synchronous External Abort (SEA) on Arm64. The kernel will queue a memory_failure() work which poisons the related page, unmaps the page, and then sends a SIGBUS to the process, so that a system wide panic can be avoided. However, no memory_failure() work will be queued when abnormal synchronous errors occur. These errors can include situations like invalid PA, unexpected severity, no memory failure config support, invalid GUID section, etc. In such a case, the user-space process will trigger SEA again. This loop can potentially exceed the platform firmware threshold or even trigger a kernel hard lockup, leading to a system reboot. Fix it by performing a force kill if no memory_failure() work is queued for synchronous errors. [ rjw: Changelog edits ] | ||||
| CVE-2025-39721 | 1 Linux | 1 Linux Kernel | 2026-03-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - flush misc workqueue during device shutdown Repeated loading and unloading of a device specific QAT driver, for example qat_4xxx, in a tight loop can lead to a crash due to a use-after-free scenario. This occurs when a power management (PM) interrupt triggers just before the device-specific driver (e.g., qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains loaded. Since the driver uses a shared workqueue (`qat_misc_wq`) across all devices and owned by intel_qat.ko, a deferred routine from the device-specific driver may still be pending in the queue. If this routine executes after the driver is unloaded, it can dereference freed memory, resulting in a page fault and kernel crash like the following: BUG: unable to handle page fault for address: ffa000002e50a01c #PF: supervisor read access in kernel mode RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat] Call Trace: pm_bh_handler+0x1d2/0x250 [intel_qat] process_one_work+0x171/0x340 worker_thread+0x277/0x3a0 kthread+0xf0/0x120 ret_from_fork+0x2d/0x50 To prevent this, flush the misc workqueue during device shutdown to ensure that all pending work items are completed before the driver is unloaded. Note: This approach may slightly increase shutdown latency if the workqueue contains jobs from other devices, but it ensures correctness and stability. | ||||
| CVE-2021-47734 | 1 Cmsimple | 1 Cmsimple | 2026-03-17 | 7.8 High |
| CMSimple 5.4 contains an authenticated local file inclusion vulnerability that allows remote attackers to manipulate PHP session files and execute arbitrary code. Attackers can leverage the vulnerability by changing the functions file path and uploading malicious PHP code through session file upload mechanisms. | ||||
| CVE-2025-60690 | 1 Linksys | 2 E1200, E1200 Firmware | 2026-03-17 | 8.8 High |
| A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. | ||||
| CVE-2025-38501 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-03-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit repeated connections from clients with the same IP Repeated connections from clients with the same IP address may exhaust the max connections and prevent other normal client connections. This patch limit repeated connections from clients with the same IP. | ||||
| CVE-2025-38494 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-03-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: do not bypass hid_hw_raw_request hid_hw_raw_request() is actually useful to ensure the provided buffer and length are valid. Directly calling in the low level transport driver function bypassed those checks and allowed invalid paramto be used. | ||||
| CVE-2025-38295 | 1 Linux | 1 Linux Kernel | 2026-03-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create() The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context. Following kernel warning and stack trace: [ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289 [ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38 [ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0 [ 31.745181] [ T2289] Tainted: [W]=WARN [ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT) [ 31.745188] [ T2289] Call trace: [ 31.745191] [ T2289] show_stack+0x28/0x40 (C) [ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198 [ 31.745205] [ T2289] dump_stack+0x20/0x50 [ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0 [ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38 [ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745246] [ T2289] platform_probe+0x98/0xe0 [ 31.745254] [ T2289] really_probe+0x144/0x3f8 [ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180 [ 31.745261] [ T2289] driver_probe_device+0x54/0x268 [ 31.745264] [ T2289] __driver_attach+0x11c/0x288 [ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160 [ 31.745274] [ T2289] driver_attach+0x34/0x50 [ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0 [ 31.745281] [ T2289] driver_register+0x78/0x120 [ 31.745285] [ T2289] __platform_driver_register+0x30/0x48 [ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745298] [ T2289] do_one_initcall+0x11c/0x438 [ 31.745303] [ T2289] do_init_module+0x68/0x228 [ 31.745311] [ T2289] load_module+0x118c/0x13a8 [ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390 [ 31.745320] [ T2289] invoke_syscall+0x74/0x108 [ 31.745326] [ T2289] el0_svc_common+0x90/0xf8 [ 31.745330] [ T2289] do_el0_svc+0x2c/0x48 [ 31.745333] [ T2289] el0_svc+0x60/0x150 [ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118 [ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0 Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts. | ||||
| CVE-2025-38361 | 1 Linux | 1 Linux Kernel | 2026-03-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check dce_hwseq before dereferencing it [WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad) | ||||
| CVE-2025-14558 | 1 Freebsd | 1 Freebsd | 2026-03-17 | 7.2 High |
| The rtsol(8) and rtsold(8) programs do not validate the domain search list options provided in router advertisement messages; the option body is passed to resolvconf(8) unmodified. resolvconf(8) is a shell script which does not validate its input. A lack of quoting meant that shell commands pass as input to resolvconf(8) may be executed. | ||||
| CVE-2025-14769 | 1 Freebsd | 1 Freebsd | 2026-03-17 | 7.5 High |
| In some cases, the `tcp-setmss` handler may free the packet data and throw an error without halting the rule processing engine. A subsequent rule can then allow the traffic after the packet data is gone, resulting in a NULL pointer dereference. Maliciously crafted packets sent from a remote host may result in a Denial of Service (DoS) if the `tcp-setmss` directive is used and a subsequent rule would allow the traffic to pass. | ||||
| CVE-2025-37966 | 1 Linux | 1 Linux Kernel | 2026-03-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not available, the kernel crashes: Oops - illegal instruction [#1] [snip] epc : set_tagged_addr_ctrl+0x112/0x15a ra : set_tagged_addr_ctrl+0x74/0x15a epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10 [snip] status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002 set_tagged_addr_ctrl+0x112/0x15a __riscv_sys_prctl+0x352/0x73c do_trap_ecall_u+0x17c/0x20c andle_exception+0x150/0x15c Fix it by checking if Supm is available. | ||||
| CVE-2025-15547 | 1 Freebsd | 1 Freebsd | 2026-03-17 | 8.8 High |
| By default, jailed processes cannot mount filesystems, including nullfs(4). However, the allow.mount.nullfs option enables mounting nullfs filesystems, subject to privilege checks. If a privileged user within a jail is able to nullfs-mount directories, a limitation of the kernel's path lookup logic allows that user to escape the jail's chroot, yielding access to the full filesystem of the host or parent jail. In a jail configured to allow nullfs(4) mounts from within the jail, the jailed root user can escape the jail's filesystem root. | ||||
| CVE-2025-15576 | 1 Freebsd | 1 Freebsd | 2026-03-17 | 7.5 High |
| If two sibling jails are restricted to separate filesystem trees, which is to say that neither of the two jail root directories is an ancestor of the other, jailed processes may nonetheless be able to access a shared directory via a nullfs mount, if the administrator has configured one. In this case, cooperating processes in the two jails may establish a connection using a unix domain socket and exchange directory descriptors with each other. When performing a filesystem name lookup, at each step of the lookup, the kernel checks whether the lookup would descend below the jail root of the current process. If the jail root directory is not encountered, the lookup continues. In a configuration where processes in two different jails are able to exchange file descriptors using a unix domain socket, it is possible for a jailed process to receive a directory for a descriptor that is below that process' jail root. This enables full filesystem access for a jailed process, breaking the chroot. Note that the system administrator is still responsible for ensuring that an unprivileged user on the jail host is not able to pass directory descriptors to a jailed process, even in a patched kernel. | ||||
| CVE-2025-3887 | 3 Debian, Gstreamer, Redhat | 7 Debian Linux, Gstreamer, Enterprise Linux and 4 more | 2026-03-17 | 8.8 High |
| GStreamer H265 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H265 slice headers. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26596. | ||||
| CVE-2023-50186 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of metadata within AV1 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22300. | ||||
| CVE-2023-40475 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer MXF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of MXF video files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-21661. | ||||
| CVE-2023-37328 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer PGS File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of PGS subtitle files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-20994. | ||||
| CVE-2023-37327 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer FLAC File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of FLAC audio files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20775. | ||||
| CVE-2016-9445 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| Integer overflow in the vmnc decoder in the gstreamer allows remote attackers to cause a denial of service (crash) via large width and height values, which triggers a buffer overflow. | ||||
| CVE-2015-0797 | 6 Debian, Gstreamer, Linux and 3 more | 16 Debian Linux, Gstreamer, Linux Kernel and 13 more | 2026-03-17 | N/A |
| GStreamer before 1.4.5, as used in Mozilla Firefox before 38.0, Firefox ESR 31.x before 31.7, and Thunderbird before 31.7 on Linux, allows remote attackers to cause a denial of service (buffer over-read and application crash) or possibly execute arbitrary code via crafted H.264 video data in an m4v file. | ||||