Export limit exceeded: 363677 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (363677 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-14663 | 2 Code-projects, Fabian | 2 Student Management System, Student File Management System | 2025-12-16 | 2.4 Low |
| A vulnerability was determined in code-projects Student File Management System 1.0. This vulnerability affects unknown code of the file /admin/update_student.php. Executing manipulation can lead to cross site scripting. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2025-38354 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/gpu: Fix crash when throttling GPU immediately during boot There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Patchwork: https://patchwork.freedesktop.org/patch/650772/ | ||||
| CVE-2025-38362 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check for get_first_active_display() The function mod_hdcp_hdcp1_enable_encryption() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference in mod_hdcp_hdcp2_enable_encryption(). Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. | ||||
| CVE-2025-38363 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix a possible null pointer dereference In tegra_crtc_reset(), new memory is allocated with kzalloc(), but no check is performed. Before calling __drm_atomic_helper_crtc_reset, state should be checked to prevent possible null pointer dereference. | ||||
| CVE-2025-14335 | 2 Angeljudesuarez, Itsourcecode | 2 Student Management System, Student Management System | 2025-12-16 | 7.3 High |
| A vulnerability has been found in itsourcecode Student Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /new_school_year.php. The manipulation of the argument sy leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-14336 | 2 Angeljudesuarez, Itsourcecode | 2 Student Management System, Student Management System | 2025-12-16 | 7.3 High |
| A vulnerability was found in itsourcecode Student Management System 1.0. Affected by this issue is some unknown functionality of the file /promote.php. The manipulation of the argument sy results in sql injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. | ||||
| CVE-2025-3261 | 1 Thingsboard | 1 Thingsboard | 2025-12-16 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2022-4510 | 1 Microsoft | 1 Binwalk | 2025-12-16 | 7.8 High |
| A path traversal vulnerability was identified in ReFirm Labs binwalk from version 2.1.2b through 2.3.3 included. By crafting a malicious PFS filesystem file, an attacker can get binwalk's PFS extractor to extract files at arbitrary locations when binwalk is run in extraction mode (-e option). Remote code execution can be achieved by building a PFS filesystem that, upon extraction, would extract a malicious binwalk module into the folder .config/binwalk/plugins. This vulnerability is associated with program files src/binwalk/plugins/unpfs.py. This issue affects binwalk from 2.1.2b through 2.3.3 included. | ||||
| CVE-2025-14108 | 1 Zspace | 2 Q2c Nas, Q2c Nas Firmware | 2025-12-16 | 8.8 High |
| A weakness has been identified in ZSPACE Q2C NAS up to 1.1.0210050. Affected by this issue is the function zfilev2_api.OpenSafe of the file /v2/file/safe/open of the component HTTP POST Request Handler. This manipulation of the argument safe_dir causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. A technical fix is planned to be released. | ||||
| CVE-2025-14107 | 1 Zspace | 2 Q2c Nas, Q2c Nas Firmware | 2025-12-16 | 8.8 High |
| A security flaw has been discovered in ZSPACE Q2C NAS up to 1.1.0210050. Affected by this vulnerability is the function zfilev2_api.SafeStatus of the file /v2/file/safe/status of the component HTTP POST Request Handler. The manipulation of the argument safe_dir results in command injection. The attack may be performed from remote. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. A technical fix is planned to be released. | ||||
| CVE-2025-14106 | 1 Zspace | 2 Q2c Nas, Q2c Nas Firmware | 2025-12-16 | 8.8 High |
| A vulnerability was identified in ZSPACE Q2C NAS up to 1.1.0210050. Affected is the function zfilev2_api.CloseSafe of the file /v2/file/safe/close of the component HTTP POST Request Handler. The manipulation of the argument safe_dir leads to command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. A technical fix is planned to be released. | ||||
| CVE-2022-24302 | 4 Debian, Fedoraproject, Paramiko and 1 more | 6 Debian Linux, Fedora, Paramiko and 3 more | 2025-12-16 | 5.9 Medium |
| In Paramiko before 2.10.1, a race condition (between creation and chmod) in the write_private_key_file function could allow unauthorized information disclosure. | ||||
| CVE-2025-11838 | 1 Watchguard | 33 Firebox M270, Firebox M290, Firebox M370 and 30 more | 2025-12-16 | 7.5 High |
| A memory corruption vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker to trigger a Denial of Service (DoS) condition in the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer. This vulnerability affects Fireware OS 12.6.1 up to and including 12.11.4 and 2025.1 up to and including 2025.1.2. | ||||
| CVE-2024-37870 | 1 Itsourcecode | 2 Learning Management System, Learning Management System Project In Php | 2025-12-15 | 9.8 Critical |
| SQL injection vulnerability in processscore.php in Learning Management System Project In PHP With Source Code 1.0 allows attackers to execute arbitrary SQL commands via the id parameter. | ||||
| CVE-2024-29180 | 2 Redhat, Webpack.js | 11 Advanced Cluster Security, Apicurio Registry, Jboss Data Grid and 8 more | 2025-12-15 | 7.4 High |
| Prior to versions 7.1.0, 6.1.2, and 5.3.4, the webpack-dev-middleware development middleware for devpack does not validate the supplied URL address sufficiently before returning the local file. It is possible to access any file on the developer's machine. The middleware can either work with the physical filesystem when reading the files or it can use a virtualized in-memory `memfs` filesystem. If `writeToDisk` configuration option is set to `true`, the physical filesystem is used. The `getFilenameFromUrl` method is used to parse URL and build the local file path. The public path prefix is stripped from the URL, and the `unsecaped` path suffix is appended to the `outputPath`. As the URL is not unescaped and normalized automatically before calling the midlleware, it is possible to use `%2e` and `%2f` sequences to perform path traversal attack. Developers using `webpack-dev-server` or `webpack-dev-middleware` are affected by the issue. When the project is started, an attacker might access any file on the developer's machine and exfiltrate the content. If the development server is listening on a public IP address (or `0.0.0.0`), an attacker on the local network can access the local files without any interaction from the victim (direct connection to the port). If the server allows access from third-party domains, an attacker can send a malicious link to the victim. When visited, the client side script can connect to the local server and exfiltrate the local files. Starting with fixed versions 7.1.0, 6.1.2, and 5.3.4, the URL is unescaped and normalized before any further processing. | ||||
| CVE-2024-0901 | 1 Wolfssl | 1 Wolfssl | 2025-12-15 | 7.5 High |
| Remotely executed SEGV and out of bounds read allows malicious packet sender to crash or cause an out of bounds read via sending a malformed packet with the correct length. | ||||
| CVE-2024-29189 | 1 Ansys | 1 Pyansys Geometry | 2025-12-15 | 7.4 High |
| PyAnsys Geometry is a Python client library for the Ansys Geometry service and other CAD Ansys products. On file src/ansys/geometry/core/connection/product_instance.py, upon calling this method _start_program directly, users could exploit its usage to perform malicious operations on the current machine where the script is ran. This vulnerability is fixed in 0.3.3 and 0.4.12. | ||||
| CVE-2024-29195 | 1 Microsoft | 1 Azure C Shared Utility | 2025-12-15 | 6 Medium |
| The azure-c-shared-utility is a C library for AMQP/MQTT communication to Azure Cloud Services. This library may be used by the Azure IoT C SDK for communication between IoT Hub and IoT Hub devices. An attacker can cause an integer wraparound or under-allocation or heap buffer overflow due to vulnerabilities in parameter checking mechanism, by exploiting the buffer length parameter in Azure C SDK, which may lead to remote code execution. Requirements for RCE are 1. Compromised Azure account allowing malformed payloads to be sent to the device via IoT Hub service, 2. By passing IoT hub service max message payload limit of 128KB, and 3. Ability to overwrite code space with remote code. Fixed in commit https://github.com/Azure/azure-c-shared-utility/commit/1129147c38ac02ad974c4c701a1e01b2141b9fe2. | ||||
| CVE-2025-20158 | 1 Cisco | 10 Desk Phone 9841, Desk Phone 9841 Firmware, Desk Phone 9851 and 7 more | 2025-12-15 | 4.4 Medium |
| A vulnerability in the debug shell of Cisco Video Phone 8875 and Cisco Desk Phone 9800 Series could allow an authenticated, local attacker to access sensitive information on an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials with SSH access on the affected device. SSH access is disabled by default. This vulnerability is due to insufficient validation of user-supplied input by the debug shell of an affected device. An attacker could exploit this vulnerability by sending a crafted SSH client command to the CLI. A successful exploit could allow the attacker to access sensitive information on the underlying operating system. | ||||
| CVE-2025-0937 | 1 Hashicorp | 1 Nomad | 2025-12-15 | 7.1 High |
| Nomad Community and Nomad Enterprise ("Nomad") event stream configured with a wildcard namespace can bypass the ACL Policy allowing reads on other namespaces. | ||||