Export limit exceeded: 401175 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25008 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25008 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50664 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: fix leak of memory fw | ||||
| CVE-2023-53814 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix dropping valid root bus resources with .end = zero On r8a7791/koelsch: kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xc3a34e00 (size 64): comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s) hex dump (first 32 bytes): b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00 .]...].......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<fe3aa979>] __kmalloc+0xf0/0x140 [<34bd6bc0>] resource_list_create_entry+0x18/0x38 [<767046bc>] pci_add_resource_offset+0x20/0x68 [<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390 When coalescing two resources for a contiguous aperture, the second resource is enlarged to cover the full contiguous range, while the first resource is marked invalid. This invalidation is done by clearing the flags, start, and end members. When adding the initial resources to the bus later, invalid resources are skipped. Unfortunately, the check for an invalid resource considers only the end member, causing false positives. E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no longer registered with pci_bus_insert_busn_res() (causing the memory leak), nor printed: pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges: pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000 pci-rcar-gen2 ee090000.pci: PCI: revision 11 pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00 -pci_bus 0000:00: root bus resource [bus 00] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff] Fix this by only skipping resources where all of the flags, start, and end members are zero. | ||||
| CVE-2023-53826 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show() Wear-leveling entry could be freed in error path, which may be accessed again in eraseblk_count_seq_show(), for example: __erase_worker eraseblk_count_seq_show wl = ubi->lookuptbl[*block_number] if (wl) wl_entry_destroy ubi->lookuptbl[e->pnum] = NULL kmem_cache_free(ubi_wl_entry_slab, e) erase_count = wl->ec // UAF! Wear-leveling entry updating/accessing in ubi->lookuptbl should be protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize wl entry accessing between wl_entry_destroy() and eraseblk_count_seq_show(). Fetch a reproducer in [Link]. | ||||
| CVE-2025-22893 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2023-53782 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dccp: Fix out of bounds access in DCCP error handler There was a previous attempt to fix an out-of-bounds access in the DCCP error handlers, but that fix assumed that the error handlers only want to access the first 8 bytes of the DCCP header. Actually, they also look at the DCCP sequence number, which is stored beyond 8 bytes, so an explicit pskb_may_pull() is required. | ||||
| CVE-2023-53787 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: da9063: fix null pointer deref with partial DT config When some of the da9063 regulators do not have corresponding DT nodes a null pointer dereference occurs on boot because such regulators have no init_data causing the pointers calculated in da9063_check_xvp_constraints() to be invalid. Do not dereference them in this case. | ||||
| CVE-2022-50670 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: omap_hsmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path wihch will call mmc_free_host(). | ||||
| CVE-2025-21086 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.5 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. | ||||
| CVE-2022-50672 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynq-ipi: fix error handling while device_register() fails If device_register() fails, it has two issues: 1. The name allocated by dev_set_name() is leaked. 2. The parent of device is not NULL, device_unregister() is called in zynqmp_ipi_free_mboxes(), it will lead a kernel crash because of removing not added device. Call put_device() to give up the reference, so the name is freed in kobject_cleanup(). Add device registered check in zynqmp_ipi_free_mboxes() to avoid null-ptr-deref. | ||||
| CVE-2023-53813 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix rbtree traversal bug in ext4_mb_use_preallocated During allocations, while looking for preallocations(PA) in the per inode rbtree, we can't do a direct traversal of the tree because ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted and that can cause direct traversal to skip some entries. This was leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy our request and ultimately tried to create a new PA that would overlap with the missed one. To makes sure we handle that case while still keeping the performance of the rbtree, we make use of the fact that the only pa that could possibly overlap the original goal start is the one that satisfies the below conditions: 1. It must have it's logical start immediately to the left of (ie less than) original logical start. 2. It must not be deleted To find this pa we use the following traversal method: 1. Descend into the rbtree normally to find the immediate neighboring PA. Here we keep descending irrespective of if the PA is deleted or if it overlaps with our request etc. The goal is to find an immediately adjacent PA. 2. If the found PA is on right of original goal, use rb_prev() to find the left adjacent PA. 3. Check if this PA is deleted and keep moving left with rb_prev() until a non deleted PA is found. 4. This is the PA we are looking for. Now we can check if it can satisfy the original request and proceed accordingly. This approach also takes care of having deleted PAs in the tree. (While we are at it, also fix a possible overflow bug in calculating the end of a PA) [1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/ | ||||
| CVE-2022-50679 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix DMA mappings leak During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. | ||||
| CVE-2023-54143 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init() If we encounter any error in the vdec_msg_queue_init() then we need to set "msg_queue->wdma_addr.size = 0;". Normally, this is done inside the vdec_msg_queue_deinit() function. However, if the first call to allocate &msg_queue->wdma_addr fails, then the vdec_msg_queue_deinit() function is a no-op. For that situation, just set the size to zero explicitly and return. There were two other error paths which did not clean up before returning. Change those error paths to goto mem_alloc_err. | ||||
| CVE-2022-50677 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: fix use after free in _ipmi_destroy_user() The intf_free() function frees the "intf" pointer so we cannot dereference it again on the next line. | ||||
| CVE-2025-26697 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 3.3 Low |
| Uncontrolled resource consumption in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable denial of service. | ||||
| CVE-2022-50638 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in __es_tree_search caused by bad boot loader inode We got a issue as fllows: ================================================================== kernel BUG at fs/ext4/extents_status.c:203! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349 RIP: 0010:ext4_es_end.isra.0+0x34/0x42 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __es_tree_search.isra.0+0x6d/0xf5 ext4_es_cache_extent+0xfa/0x230 ext4_cache_extents+0xd2/0x110 ext4_find_extent+0x5d5/0x8c0 ext4_ext_map_blocks+0x9c/0x1d30 ext4_map_blocks+0x431/0xa50 ext4_mpage_readpages+0x48e/0xe40 ext4_readahead+0x47/0x50 read_pages+0x82/0x530 page_cache_ra_unbounded+0x199/0x2a0 do_page_cache_ra+0x47/0x70 page_cache_ra_order+0x242/0x400 ondemand_readahead+0x1e8/0x4b0 page_cache_sync_ra+0xf4/0x110 filemap_get_pages+0x131/0xb20 filemap_read+0xda/0x4b0 generic_file_read_iter+0x13a/0x250 ext4_file_read_iter+0x59/0x1d0 vfs_read+0x28f/0x460 ksys_read+0x73/0x160 __x64_sys_read+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> ================================================================== In the above issue, ioctl invokes the swap_inode_boot_loader function to swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and disordered extents, and i_nlink is set to 1. The extents check for inode in the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO. While links_count is set to 1, the extents are not initialized in swap_inode_boot_loader. After the ioctl command is executed successfully, the extents are swapped to inode<12>, in this case, run the `cat` command to view inode<12>. And Bug_ON is triggered due to the incorrect extents. When the boot loader inode is not initialized, its imode can be one of the following: 1) the imode is a bad type, which is marked as bad_inode in ext4_iget and set to S_IFREG. 2) the imode is good type but not S_IFREG. 3) the imode is S_IFREG. The BUG_ON may be triggered by bypassing the check in cases 1 and 2. Therefore, when the boot loader inode is bad_inode or its imode is not S_IFREG, initialize the inode to avoid triggering the BUG. | ||||
| CVE-2022-50637 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut() If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(), the program will return, resulting in "table" resource is not released. | ||||
| CVE-2025-71197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: w1: therm: Fix off-by-one buffer overflow in alarms_store The sysfs buffer passed to alarms_store() is allocated with 'size + 1' bytes and a NUL terminator is appended. However, the 'size' argument does not account for this extra byte. The original code then allocated 'size' bytes and used strcpy() to copy 'buf', which always writes one byte past the allocated buffer since strcpy() copies until the NUL terminator at index 'size'. Fix this by parsing the 'buf' parameter directly using simple_strtoll() without allocating any intermediate memory or string copying. This removes the overflow while simplifying the code. | ||||
| CVE-2023-53812 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix decoder disable pm crash Can't call pm_runtime_disable when the architecture support sub device for 'dev->pm.dev' is NUll, or will get below crash log. [ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0 [ 10.771556] lr : __pm_runtime_disable+0x30/0x130 [ 10.771558] sp : ffffffc01e4cb800 [ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8 [ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0 [ 10.771567] x25: 0000000000000002 x24: 0000000000000002 [ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001 [ 10.771573] x21: 0000000000000001 x20: 0000000000000000 [ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18 [ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74 [ 10.771583] x15: 00000000000002ea x14: 0000000000000058 [ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4 [ 10.771590] x11: 0000000000000000 x10: 0000000000000001 [ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4 [ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000 [ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001 [ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001 [ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4 [ 10.771613] Call trace: [ 10.771617] _raw_spin_lock_irq+0x4c/0xa0 [ 10.771620] __pm_runtime_disable+0x30/0x130 [ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc] [ 10.771662] platform_drv_probe+0x9c/0xbc [ 10.771665] really_probe+0x13c/0x3a0 [ 10.771668] driver_probe_device+0x84/0xc0 [ 10.771671] device_driver_attach+0x54/0x78 | ||||
| CVE-2023-54138 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix NULL-deref on irq uninstall In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Patchwork: https://patchwork.freedesktop.org/patch/525104/ | ||||
| CVE-2023-54080 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: skip splitting and logical rewriting on pre-alloc write When doing a relocation, there is a chance that at the time of btrfs_reloc_clone_csums(), there is no checksum for the corresponding region. In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item and so ordered_extent's logical is set to some invalid value. Then, btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a block group and will hit an assert or a null pointer dereference as following. This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16 times) with a null_blk setup. The device's zone size and capacity is set to 32 MB and the storage size is set to 5 GB on my setup. KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00 > 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00 RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827 R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000 R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0 Call Trace: <TASK> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] ? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs] btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs] ? rcu_is_watching+0x11/0xb0 ? lock_release+0x47a/0x620 ? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs] ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs] ? __smp_call_single_queue+0x124/0x350 ? rcu_is_watching+0x11/0xb0 btrfs_work_helper+0x19f/0xc60 [btrfs] ? __pfx_try_to_wake_up+0x10/0x10 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 process_one_work+0x8c1/0x1430 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? _raw_spin_lock_irq+0x52/0x60 worker_thread+0x100/0x12c0 ? __kthread_parkme+0xc1/0x1f0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2ea/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> On the zoned mode, writing to pre-allocated region means data relocation write. Such write always uses WRITE command so there is no need of splitting and rewriting logical address. Thus, we can just skip the function for the case. | ||||