Export limit exceeded: 384591 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384591 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-59368 | 1 Asus | 1 Router | 2026-04-15 | N/A |
| An integer underflow vulnerability has been identified in Aicloud. An authenticated attacker may trigger this vulnerability by sending a crafted request, potentially impacting the availability of the device. Refer to the ' Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. | ||||
| CVE-2025-59369 | 1 Asus | 1 Router | 2026-04-15 | N/A |
| A SQL injection vulnerability has been identified in bwdpi. A remote, authenticated attacker could leverage this vulnerability to potentially execute arbitrary SQL queries, leading to unauthorized data access. Refer to the 'Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. | ||||
| CVE-2025-59372 | 1 Asus | 1 Router | 2026-04-15 | N/A |
| A path traversal vulnerability has been identified in certain router models. A remote, authenticated attacker could exploit this vulnerability to write files outside the intended directory, potentially affecting device integrity. Refer to the 'Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. | ||||
| CVE-2019-25257 | 1 Logicaldoc | 1 Logicaldoc | 2026-04-15 | 6.5 Medium |
| LogicalDOC Enterprise 7.7.4 contains multiple authenticated OS command execution vulnerabilities that allow attackers to manipulate binary paths when changing system settings. Attackers can exploit these vulnerabilities by modifying configuration parameters like antivirus.command, ocr.Tesseract.path, and other system paths to execute arbitrary system commands with elevated privileges. | ||||
| CVE-2025-59448 | 1 Yosmart | 3 Yolink Hub, Yolink Mobile Application, Yolink Mqtt Broker | 2026-04-15 | 4.7 Medium |
| Components of the YoSmart YoLink ecosystem through 2025-10-02 leverage unencrypted MQTT to communicate over the internet. An attacker with the ability to monitor network traffic could therefore obtain sensitive information or tamper with the traffic to control affected devices. This affects YoLink Hub 0382, YoLink Mobile Application 1.40.41, and YoLink MQTT Broker. NOTE: The vendor states that the vulnerability described (related to insecure transmission) only impacts the legacy mobile application logic, not the Hub hardware or firmware. The Hub functions solely as a pass-through (transparent gateway) for LoRa wireless data and does not inspect or process the application layer data. | ||||
| CVE-2025-59449 | 1 Yosmart | 1 Yolink Mqtt Broker | 2026-04-15 | 4.9 Medium |
| The YoSmart YoLink MQTT broker through 2025-10-02 does not enforce sufficient authorization controls to prevent cross-account attacks, allowing an attacker to remotely operate affected devices if the attacker obtains the associated device IDs. Because YoLink device IDs are predictable, an attacker can exploit this to gain full control over any other YoLink user's devices. | ||||
| CVE-2025-59484 | 1 Automationdirect | 1 Click Plus | 2026-04-15 | 8.3 High |
| The use of a broken or risky cryptographic algorithm was discovered in firmware version 3.60 of the Click Plus PLC. The vulnerability relies on the fact that the software uses an insecure implementation of the RSA encryption algorithm. | ||||
| CVE-2025-14204 | 2026-04-15 | 6.3 Medium | ||
| A vulnerability has been found in TykoDev cherry-studio-TykoFork 0.1. This issue affects the function redirectToAuthorization of the file /.well-known/oauth-authorization-server of the component OAuth Server Discovery. Such manipulation of the argument authorizationUrl leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-59530 | 1 Quic-go Project | 1 Quic-go | 2026-04-15 | 7.5 High |
| quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames. | ||||
| CVE-2025-8264 | 1 Z-push | 1 Z-push-dev | 2026-04-15 | 9 Critical |
| Versions of the package z-push/z-push-dev before 2.7.6 are vulnerable to SQL Injection due to unparameterized queries in the IMAP backend. An attacker can inject malicious commands by manipulating the username field in basic authentication. This allows the attacker to access and potentially modify or delete sensitive data from a linked third-party database. **Note:** This vulnerability affects Z-Push installations that utilize the IMAP backend and have the IMAP_FROM_SQL_QUERY option configured. Mitigation Change configuration to use the default or LDAP in backend/imap/config.php php define('IMAP_DEFAULTFROM', ''); or php define('IMAP_DEFAULTFROM', 'ldap'); | ||||
| CVE-2025-5963 | 2026-04-15 | N/A | ||
| The Postbox's configuration on macOS, specifically the presence of entitlements: "com.apple.security.cs.allow-dyld-environment-variables" and "com.apple.security.cs.disable-library-validation" allows for Dynamic Library (Dylib) injection. A local attacker with unprivileged access can use environment variables like DYLD_INSERT_LIBRARIES to successfully inject code in application's context and bypass Transparency, Consent, and Control (TCC). Acquired resource access is limited to previously granted permissions by the user. Access to other resources beyond granted-permissions requires user interaction with a system prompt asking for permission. The original company behind Postbox is no longer operational, the software will no longer receive updates. The acquiring company (em Client) did not cooperate in vulnerability disclosure. | ||||
| CVE-2025-59692 | 2 Linux, Purevpn | 2 Linux, Purevpn | 2026-04-15 | 3.7 Low |
| PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0. | ||||
| CVE-2025-59728 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59729 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.8 Medium |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer. If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000. The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer. There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59734 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2. When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0. This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false. A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again. Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer. Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb. GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata. This issue can be triggered just by probing whether a file has the sanm format. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-11175 | 1 Wikimedia | 1 Mediawiki-discussiontools Extension | 2026-04-15 | N/A |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in The Wikimedia Foundation Mediawiki - DiscussionTools Extension allows Regular Expression Exponential Blowup.This issue affects Mediawiki - DiscussionTools Extension: 1.44, 1.43. | ||||
| CVE-2025-5993 | 2026-04-15 | N/A | ||
| ITCube CRM in versions from 2023.2 through 2025.2 is vulnerable to path traversal. Unauthenticated remote attacker is able to exploit vulnerable parameter fileName and construct payloads that allow to download any file accessible by the the web server process. | ||||
| CVE-2025-59936 | 1 Nearform | 1 Get-jwks | 2026-04-15 | N/A |
| get-jwks contains fetch utils for JWKS keys. In versions prior to 11.0.2, a vulnerability in get-jwks can lead to cache poisoning in the JWKS key-fetching mechanism. When the iss (issuer) claim is validated only after keys are retrieved from the cache, it is possible for cached keys from an unexpected issuer to be reused, resulting in a bypass of issuer validation. This design flaw enables a potential attack where a malicious actor crafts a pair of JWTs, the first one ensuring that a chosen public key is fetched and stored in the shared JWKS cache, and the second one leveraging that cached key to pass signature validation for a targeted iss value. The vulnerability will work only if the iss validation is done after the use of get-jwks for keys retrieval. This issue has been patched in version 11.0.2. | ||||
| CVE-2025-59940 | 2 Mkdocs, Mondeja | 2 Mkdocs, Mkdocs-include-markdown-plugin | 2026-04-15 | 6.5 Medium |
| mkdocs-include-markdown-plugin is an Mkdocs Markdown includer plugin. In versions 7.1.7 and below, there is a vulnerability where unvalidated input can collide with substitution placeholders. This issue is fixed in version 7.1.8. | ||||
| CVE-2025-5514 | 1 Mitsubishi Electric | 1 Melsec Iq-f Series | 2026-04-15 | 5.3 Medium |
| Improper Handling of Length Parameter Inconsistency vulnerability in web server function on Mitsubishi Electric Corporation MELSEC iQ-F Series CPU module allows a remote unauthenticated attacker to delay the processing of the web server function and prevent legitimate users from utilizing the web server function, by sending a specially crafted HTTP request. | ||||