Export limit exceeded: 388535 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (388535 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-67579 | 2 Vanquish, Wordpress | 2 User Extra Fields, Wordpress | 2026-04-15 | 5.3 Medium |
| Missing Authorization vulnerability in vanquish User Extra Fields wp-user-extra-fields allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects User Extra Fields: from n/a through <= 16.8. | ||||
| CVE-2025-8697 | 2026-04-15 | 6.3 Medium | ||
| A vulnerability was found in agentUniverse up to 0.0.18 and classified as critical. This issue affects the function StdioServerParameters of the component MCPSessionManager/MCPTool/MCPToolkit. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-9999 | 1 Arcinfo | 1 Pcvue | 2026-04-15 | N/A |
| Some payload elements of the messages sent between two stations in a networking architecture are not properly checked on the receiving station allowing an attacker to execute unauthorized commands in the application. | ||||
| CVE-2025-5105 | 2026-04-15 | 7.3 High | ||
| A vulnerability was found in TOZED ZLT W51 up to 1.4.2 and classified as critical. Affected by this issue is some unknown functionality of the component Service Port 7777. The manipulation leads to improper clearing of heap memory before release. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2024-12324 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 6.1 Medium |
| The Unilevel MLM Plan plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘page’ parameter in all versions up to, and including, 1.1.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | ||||
| CVE-2025-54065 | 1 Zdoom | 1 Gzdoom | 2026-04-15 | 7.8 High |
| GZDoom is a feature centric port for all Doom engine games. GZDoom is an open source Doom engine. In versions 4.14.2 and earlier, ZScript actor state handling allows scripts to read arbitrary addresses, write constants into the JIT-compiled code section, and redirect control flow through crafted FState and VMFunction structures. A script can copy FState structures into a writable buffer, modify function pointers and state transitions, and cause execution of attacker-controlled bytecode, leading to arbitrary code execution. | ||||
| CVE-2023-37057 | 1 Jlink | 1 Ax1800 | 2026-04-15 | 9.8 Critical |
| An issue in JLINK Unionman Technology Co. Ltd Jlink AX1800 v.1.0 allows a remote attacker to execute arbitrary code via the router's authentication mechanism. | ||||
| CVE-2024-22780 | 2026-04-15 | 6.1 Medium | ||
| Cross Site Scripting vulnerability in CA17 TeamsACS v.1.0.1 allows a remote attacker to execute arbitrary code via a crafted script to the errmsg parameter. | ||||
| CVE-2024-28326 | 1 Asus | 1 Rt-n12\+ B1 Firmware | 2026-04-15 | 6.8 Medium |
| Incorrect Access Control in ASUS RT-N12+ B1 and RT-N12 D1 routers allows local attackers to obtain root terminal access via the the UART interface. | ||||
| CVE-2024-35563 | 1 Cdg | 1 Server | 2026-04-15 | 9.8 Critical |
| CDG-Server-V5.6.2.126.139 and earlier was discovered to contain a SQL injection vulnerability via the permissionId parameter in CDGTempPermissions. | ||||
| CVE-2024-11809 | 2026-04-15 | 6.1 Medium | ||
| The Primer MyData for Woocommerce plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'img_src' parameter in all versions up to, and including, 4.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | ||||
| CVE-2023-53854 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8186: Fix use-after-free in driver remove path When devm runs function in the "remove" path for a device it runs them in the reverse order. That means that if you have parts of your driver that aren't using devm or are using "roll your own" devm w/ devm_add_action_or_reset() you need to keep that in mind. The mt8186 audio driver didn't quite get this right. Specifically, in mt8186_init_clock() it called mt8186_audsys_clk_register() and then went on to call a bunch of other devm function. The caller of mt8186_init_clock() used devm_add_action_or_reset() to call mt8186_deinit_clock() but, because of the intervening devm functions, the order was wrong. Specifically at probe time, the order was: 1. mt8186_audsys_clk_register() 2. afe_priv->clk = devm_kcalloc(...) 3. afe_priv->clk[i] = devm_clk_get(...) At remove time, the order (which should have been 3, 2, 1) was: 1. mt8186_audsys_clk_unregister() 3. Free all of afe_priv->clk[i] 2. Free afe_priv->clk The above seemed to be causing a use-after-free. Luckily, it's easy to fix this by simply using devm more correctly. Let's move the devm_add_action_or_reset() to the right place. In addition to fixing the use-after-free, code inspection shows that this fixes a leak (missing call to mt8186_audsys_clk_unregister()) that would have happened if any of the syscon_regmap_lookup_by_phandle() calls in mt8186_init_clock() had failed. | ||||
| CVE-2023-53825 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg(). syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720 ("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by updating kcm_tx_msg(head)->last_skb if partial data is copied so that the following sendmsg() will resume from the skb. However, we cannot know how many bytes were copied when we get the error. Thus, we could mess up the MSG_MORE queue. When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we do so for UDP by udp_flush_pending_frames(). Even without this change, when the error occurred, the following sendmsg() resumed from a wrong skb and the queue was messed up. However, we have yet to get such a report, and only syzkaller stumbled on it. So, this can be changed safely. Note this does not change SOCK_SEQPACKET behaviour. | ||||
| CVE-2023-53815 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Prevent RT livelock in itimer_delete() itimer_delete() has a retry loop when the timer is concurrently expired. On non-RT kernels this just spin-waits until the timer callback has completed, except for posix CPU timers which have HAVE_POSIX_CPU_TIMERS_TASK_WORK enabled. In that case and on RT kernels the existing task could live lock when preempting the task which does the timer delivery. Replace spin_unlock() with an invocation of timer_wait_running() to handle it the same way as the other retry loops in the posix timer code. | ||||
| CVE-2023-53820 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: loop: loop_set_status_from_info() check before assignment In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should be checked before reassignment, because if an overflow error occurs, the original correct value will be changed to the wrong value, and it will not be changed back. More, the original patch did not solve the problem, the value was set and ioctl returned an error, but the subsequent io used the value in the loop driver, which still caused an alarm: loop_handle_cmd do_req_filebacked loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset; lo_rw_aio cmd->iocb.ki_pos = pos | ||||
| CVE-2023-53783 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-iocost: fix divide by 0 error in calc_lcoefs() echo max of u64 to cost.model can cause divide by 0 error. # echo 8:0 rbps=18446744073709551615 > /sys/fs/cgroup/io.cost.model divide error: 0000 [#1] PREEMPT SMP RIP: 0010:calc_lcoefs+0x4c/0xc0 Call Trace: <TASK> ioc_refresh_params+0x2b3/0x4f0 ioc_cost_model_write+0x3cb/0x4c0 ? _copy_from_iter+0x6d/0x6c0 ? kernfs_fop_write_iter+0xfc/0x270 cgroup_file_write+0xa0/0x200 kernfs_fop_write_iter+0x17d/0x270 vfs_write+0x414/0x620 ksys_write+0x73/0x160 __x64_sys_write+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd calc_lcoefs() uses the input value of cost.model in DIV_ROUND_UP_ULL, overflow would happen if bps plus IOC_PAGE_SIZE is greater than ULLONG_MAX, it can cause divide by 0 error. Fix the problem by setting basecost | ||||
| CVE-2024-12140 | 2026-04-15 | 4.3 Medium | ||
| The Elementor Addons AI Addons – 70 Widgets, Premium Templates, Ultimate Elements plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 2.2.1 via the render function due to insufficient restrictions on which templates can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private or draft templates that they should not have access to. | ||||
| CVE-2023-22675 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 4.3 Medium |
| Cross-Site Request Forgery (CSRF) vulnerability in Taylor Hawkes WP Fast Cache allows Cross Site Request Forgery.This issue affects WP Fast Cache: from n/a through 1.5. | ||||
| CVE-2022-50659 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: geode - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. We add a new struct 'amd_geode_priv' to record pointer of the pci_dev and membase, and then add missing pci_dev_put() for the normal and error path. | ||||
| CVE-2021-47717 | 2026-04-15 | N/A | ||
| IntelliChoice eFORCE Software Suite 2.5.9 contains a username enumeration vulnerability that allows attackers to enumerate valid users by exploiting the 'ctl00$MainContent$UserName' POST parameter. Attackers can send requests with valid usernames to retrieve user information. | ||||