Export limit exceeded: 395331 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395331 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89876 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: tda18250: fix possible integer overflow Integer overflow may occur, when variable exp equals to zero. Result of shift 1 << (exp - 1) may then leads to undefined behavior. | ||||
| CVE-2026-89877 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails. | ||||
| CVE-2026-89879 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: s2255: bound JPEG frame size before copying into the buffer s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG frame into the vb2 plane. vc->jpg_size is taken verbatim from the S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame()) and, unlike the frame payload length just above it, is never bounded: payload = le32_to_cpu(pdword[3]); if (payload > vc->req_image_size) /* payload is checked ... */ return -EINVAL; vc->pkt_size = payload; vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */ A malicious or malfunctioning device can therefore report a jpg_size larger than the destination vb2 plane, and the memcpy() writes past it. jpg_size is a signed int, so a value with the top bit set also turns into a huge length. Reject a frame whose jpg_size is negative or exceeds the plane size before copying it. | ||||
| CVE-2026-89880 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_initialized can exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks from urbs_initialized - 1 down to 0 and reads past the end of dev->urb_list[], passing garbage pointers to usb_free_urb(). Mirror the teardown that stop_streaming() already performs: on the error path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs() before unlocking. Both helpers are idempotent (free_urbs kills and zeros urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the buf_num counter), so partial-failure paths and the no-allocation paths remain safe. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-89939 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable atlas_buffer_postenable() acquires a runtime PM reference with pm_runtime_resume_and_get() but returns the result of atlas_set_interrupt() directly. If atlas_set_interrupt() fails, the runtime PM reference is leaked and the device can never autosuspend. Add pm_runtime_put_autosuspend() on the error path to balance the reference. | ||||
| CVE-2026-90004 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: handle region split failure in apply_min_nr_regions() damon_apply_min_nr_regions() repeatedly split each region until its size becomes small enough to meet the user-defined low limit of the number of regions. The loop assumes the split operation (damon_split_region_at()) will always succeed and create the new region. But the operation could silently fail for memory allocation failures, for example. If such failure happens and the region was the last region, the linked list-based next region fetching returns invalid pointer. As a result, invalid memory dereference and corruption could happen. Even if the corner case is handled, it imposes stress to the allocator by trying split regions for other targets. Fix the issue by breaking all the loops for any region split failure. This means there could be a min_nr_regions violation. It will only rarely happen since the allocation is arguably too small to fail. Even if it happens, it is only temporal. damon_apply_min_nr_regions() will be called again after the aggregation interval. The user impact of the issue should be minor, since the allocation is arguably too small to fail. But, it could still theoretically happen, and the consequence is very bad. This issue was discovered [1] by Sashiko. | ||||
| CVE-2026-77360 | 1 Middleapi | 1 Orpc | 2026-09-18 | N/A |
| oRPC is an tool that helps build APIs that are end-to-end type-safe and adhere to OpenAPI standards. Prior to 1.14.8, the @orpc/server CORS plugin in packages/server/src/plugins/cors.ts copies a client's incoming Vary request header into the response instead of controlling Vary as a response-only header and using Origin for request-origin variation. In deployments behind a shared cache, CDN, or reverse proxy that keys responses using Vary, a client can inject arbitrary variation values, pollute cache keys, and cause inconsistent CORS enforcement for other clients. Default non-cached configurations have no established direct confidentiality, integrity, or availability impact. This issue is fixed in version 1.14.8. | ||||
| CVE-2026-86043 | 1 Zalando | 1 Skipper | 2026-09-18 | 7.5 High |
| Skipper is an HTTP router and reverse proxy for service composition. Prior to version 0.27.37, the opaAuthorizeRequestWithBody filter can authorize an oversized request after Skipper truncates the body presented to Open Policy Agent because the input.truncated_body signal is derived from Content-Length rather than the actual read result. In filters/openpolicyagent/openpolicyagent.go, ExtractHttpBodyOptionally truncates bodies at maxBodyBytes, while filters/openpolicyagent/internal/envoy/skipperadapter.go copies the request headers without adding a Content-Length value that reflects the truncation. For an HTTP/1.1 request using Transfer-Encoding: chunked or an HTTP/2 request without Content-Length, a body-inspecting policy that follows the prior mitigation and permits input.truncated_body equal to false can evaluate only the truncated prefix, allow the request, and then forward the full oversized body to the protected upstream. This residual issue is distinct from CVE-2026-50197. This issue is fixed in version 0.27.37. | ||||
| CVE-2026-86071 | 1 Junrar | 1 Junrar | 2026-09-18 | 3.7 Low |
| Junrar is an open source Java RAR archive library. Prior to version 7.6.1, LocalFolderExtractor in src/main/java/com/github/junrar/LocalFolderExtractor.java can create directories outside the intended extraction root when processing a crafted archive entry. LocalFolderExtractor.createFile() validates only the final canonical file path, while LocalFolderExtractor.makeFile() creates intermediate path segments with unchecked mkdir() calls. An entry can therefore make the final path resolve inside the destination while causing intermediate directory creation outside it, enabling filesystem pollution or file-versus-directory squatting that can make later security-sensitive writes fail. The demonstrated impact is directory creation, not unconditional arbitrary file-content write. This issue is fixed in version 7.6.1. | ||||
| CVE-2026-87976 | 1 Apache | 1 Nifi Registry | 2026-09-18 | N/A |
| Apache NiFi Registry 0.4.0 through 2.11.0 are subject to path manipulation when storing extension bundle content using group, artifact, and version coordinates from uploaded NAR manifests. The default file persistence provider used coordinates as filesystem path components without rejected parent-directory names, and the path-containment check compared an unnormalized resolved path. An authenticated user authorized to write and delete bundles in a bucket can upload a NAR with a crafted manifest resulting in file system operations outside of the file persistence directory. Upgrading to Apache NiFi Registry 2.12.0 is the recommended mitigation, which rejects parent-directory coordinates and requires a normalized path to remain a strict child of the storage root location. | ||||
| CVE-2026-86089 | 1 Apache | 1 Nifi | 2026-09-18 | N/A |
| Apache NiFi 2.11.0 supports migrating the contents of a version-controlled Process Group into a Connector using REST API methods that list eligible migration sources and submit migration requests. The framework authorized both methods against the target Connector alone, without evaluating access to the Process Groups involved. The absence of Process Group authorization allowed an authenticated user with read access to a Connector to enumerate the identifiers, names, and flow registry details of version-controlled Process Groups outside the scope of granted read policies. It also allowed a user with write access to a Connector to migrate a Process Group without write access to that Process Group, copying the flow definition, referenced assets, and component state into the Connector, and leaving the source Process Group disabled and renamed. Migration excludes sensitive property values and requires the source Process Group to be stopped with empty queues, which limits the scope of exposure. Apache NiFi installations that do not implement component-level authorization policies for Process Groups are not subject to this vulnerability, because the framework enforces Connector write permissions as the security boundary. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which filters migration sources to Process Groups the requesting user is authorized to read, and requires write access to the source Process Group when submitting a migration request. | ||||
| CVE-2026-19535 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-352: Cross-Site Request Forgery (CSRF) vulnerability in the LuCI administrative web interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote unauthenticated attacker to perform unauthorized state-changing requests on behalf of a logged-in administrator, enabling unauthorized access to privileged management functions. | ||||
| CVE-2026-73163 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. | ||||
| CVE-2026-73166 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-94: Improper Control of Generation of Code ('Code Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary code on the device, including OS commands as root. | ||||
| CVE-2026-73171 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-73: External Control of File Name or Path vulnerability in the backup-restore workflow of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote authenticated attacker to overwrite arbitrary files on the device filesystem by uploading a crafted backup archive through the web management interface. | ||||
| CVE-2026-73172 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the edgserver management service of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote unauthenticated attacker to execute arbitrary OS commands as root via crafted requests to TCP port 5058. | ||||
| CVE-2026-73175 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-400: Uncontrolled Resource Consumption vulnerability in the OPC UA gateway component of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows an adjacent unauthenticated attacker to exhaust the server session pool and cause a complete denial of service to all legitimate OPC UA clients by opening multiple anonymous sessions. | ||||
| CVE-2026-73177 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-345: Insufficient Verification of Data Authenticity vulnerability in the firmware upgrade mechanism of the Advantech EKI-1242EIMS in firmware version V1.06.01. The device accepts firmware images through the authenticated web management interface without performing any cryptographic signature or certificate verification. An authenticated administrator-level attacker can install arbitrary modified firmware on the device, enabling full persistent compromise of the platform. | ||||
| CVE-2026-76420 | 2026-09-18 | 9 Critical | ||
| A vulnerability in the internal configuration of the Apache JServ Protocol (AJP) connector for Cisco Secure FMC Software could allow an unauthenticated, remote attacker to impersonate a peer device. This vulnerability is due to incorrect initialization of encryption parameters for the AJP connector at boot time. An attacker could exploit this vulnerability by sending crafted packets to the AJP connector. A successful exploit could allow the attacker to execute commands as root and gain full control over the FMC REST APIs on the affected device. Note: This vulnerability can be exploited only if the valid sftunnel connection between Cisco Secure FMC Software and Cisco Secure FTD Software is down. | ||||
| CVE-2026-87963 | 2026-09-18 | 8.6 High | ||
| The Yo WordPress plugin from 1.1 through 1.3.1 does not sanitize or parameterize the username request parameter before using it in a SQL query, and reads it before WordPress applies its request escaping, allowing unauthenticated attackers to perform SQL injection and read arbitrary database contents including administrator password hashes. | ||||