Export limit exceeded: 402949 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 402949 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402949 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98331 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: unlist vifs when their netdev is unregistered mac80211 only removes vifs from the local->interfaces list when an interface is removed via ieee80211_if_remove(), before it unregisters the netdev. However, it's possible for a netdev to be unregistered without going through that: When the netns that holds the wiphy is destroyed, the wiphy is supposed to move to the init_ns, but that can run into allocation failures. Then, mac80211 has an interface listed that doesn't exist, and will eventually hit BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()! ... _cfg80211_unregister_wdev+0x24/0x36a [cfg80211] cfg80211_unregister_wdev+0x15/0x1d [cfg80211] ieee80211_remove_interfaces+0x1ff/0x257 [mac80211] ieee80211_unregister_hw+0x73/0x1d1 [mac80211] mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim] Remove the interface from the list in ->ndo_uninit if it's still around to avoid this. | ||||
| CVE-2026-98324 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: pxa: fix double counting of the hw descriptors pxad_alloc_desc() was converted from kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT) to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc itself - but only where the compiler has __builtin_counted_by_ref(), so from gcc 15.1 or clang 22.1 on. The loop below it still increments nb_desc, which makes it come out doubled there and correct elsewhere. nb_desc is what pxad_free_desc() iterates over and what set_updater_desc() indexes from, so set it explicitly and drop the increment. The error path has to lower it to the number of descriptors allocated so far, otherwise pxad_free_desc() would free entries that were never allocated. | ||||
| CVE-2026-98305 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: disable the stats poll on teardown mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and nothing stops it until dsa_register_switch() has returned an error to mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a poll that fires once .setup or a later step of dsa_tree_setup() has failed walks freed ports. On shutdown the user ports stay registered, and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag before it was set queues the poll after cancel_delayed_work_sync() has returned. Arm the poll once .setup has succeeded and stop it from a .teardown op, which DSA calls on unregister and after a failed registration, in both cases before it frees the ports. Use disable_delayed_work_sync() there and in shutdown(): it drains a running poll as the cancel did and turns every later attempt to queue the work into a no-op, so the re-arm cannot bring the poll back. remove() and the probe error path only set WORK_STOPPED, which crc_err_work tests before it walks the ports. | ||||
| CVE-2026-98281 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Also allocate private hash on vfork() As Jann demonstrated, it is entirely feasible to access the mm through vfork(). Therefore we need to allocate a private hash on vfork() as well as any other CLONE_VM user. Specifically, it must be avoided to have (private) futex waiters before allocating the private hash. | ||||
| CVE-2026-98257 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: use rds_conn_drop() on protocol version mismatch rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with conn->c_cm_lock held. When the peer negotiates a protocol version older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls rds_conn_destroy(), which is only safe in the rmmod path: it synchronously tears the connection down and flush_work()es the shutdown work cp_down_w. That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is the very lock the event handler still holds, so the flush never completes: the two workers wait on each other and the RDS connection workqueues stall for good. All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR, DISCONNECTED) use rds_conn_drop(), which marks the connection RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use it here as well. | ||||
| CVE-2026-98216 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix the PIO_CRED credit-return mmap hfi1_file_mmap()'s PIO_CRED case must hand user space the single credit-return page that holds this context's entry. That page is the second or third page of the per-node credit-return allocation once the hardware send context index reaches 64 or 128, so the failure below is intermittent: when the entry lands on the first page the offset is zero and everything works. Two things are wrong. First, cr_page_offset is a byte offset but .va is a struct credit_return *, so adding it is pointer arithmetic and scales the offset by sizeof(struct credit_return) == 64. memvirt then lands 256 KiB or 512 KiB past a 10240-byte allocation. With an IOMMU translating, that address is inside the vmalloc range but in no vm_area, so dma_mmap_coherent() -> iommu_dma_mmap() finds no pages, vmalloc_to_pfn() returns page_to_pfn(NULL), and remap_pfn_range() installs a frame above MAXPHYADDR. The first user read then takes: psm2_ep_open_pr: Corrupted page table at address 7a14d007e000 PGD 800000013886a067 P4D 800000013886a067 PUD 13886b067 PMD 13886c067 PTE 800049168e911235 Oops: Bad pagetable: 000d [#1] SMP PTI Second, and still wrong once the arithmetic is corrected, dma_mmap_coherent() describes a whole coherent buffer and selects the page within it with vma->vm_pgoff. Offsetting cpu_addr has no effect: for a vmap'd allocation iommu_dma_mmap() uses cpu_addr only to locate the vm_area and then maps pages[vm_pgoff], which hfi1_file_mmap() has just set to 0. User space therefore always receives the first credit-return page, every credit read is for the wrong context, and send PIO stalls forever. Use the DMA API as intended: pass the base of the allocation with its full length and select the page with vm_pgoff. A separate length is needed because memlen must keep describing the VMA for the existing size check. The dma-direct path stays correct as well, since dma_direct_mmap() adds the same vm_pgoff to the base pfn. Tested on a Dell T7610 (Xeon E5-2650 v2, Intel IOMMU in DMA-FQ mode) against a Threadripper PRO 3995WX peer, both Omni-Path 100. Before this change psm2_ep_open() Oopses the kernel; with only the arithmetic corrected psm2_ep_open() succeeds but any transfer that uses send PIO hangs, PSM2_SDMA=2 (send PIO disabled) completing normally while PSM2_SDMA=0 (send PIO only) hangs every time. With this change send PIO, send DMA and the default mixed mode all work. | ||||
| CVE-2026-98175 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: cancel reconnect work in clean_demultiplex_info() clean_demultiplex_info() cancels server->echo delayed work but not server->reconnect, which can cause a use-after-free when the demultiplex thread exits while a reconnect work is still queued: cifs_demultiplex_thread() cifs_readv_from_socket() cifs_reconnect() __cifs_reconnect() cifs_queue_server_reconn() mod_delayed_work(cifsiod_wq, &server->reconnect, 0) clean_demultiplex_info() cancel_delayed_work_sync(&server->echo) // echo canceled // reconnect NOT canceled kfree_sensitive(server) // server freed ...later, on cifsiod_wq: smb2_reconnect_server() server->srv_count // UAF read of freed server Fix this by canceling server->reconnect delayed work in clean_demultiplex_info() before the server is freed, the same way cifs_put_tcp_session() already does. | ||||
| CVE-2026-98169 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOB read in smb3_enum_snapshots() If snapshot_array_size is smaller than GMT_TOKEN_SIZE, smb3_enum_snapshots() sets ret_data_len to sizeof(struct smb_snapshot_array) without verifying the actual length of the server's reply. Because SMB2_ioctl() places no lower bound on the server-supplied OutputCount and allocates retbuf to exactly that length, a short reply results in ret_data_len exceeding the size of retbuf. The subsequent copy_to_user() then reads past the end of retbuf, leaking adjacent slab memory to userspace. The subsequent clamp check is ineffective as it only reduces ret_data_len. Fix this by rejecting replies shorter than sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set to the 12-byte struct size rather than the 16-byte MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes is exactly what copy_to_user() attempts to read. | ||||
| CVE-2026-98164 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Check write tracking in all address spaces kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). [invert direction of the conditional. - Paolo] | ||||
| CVE-2026-98163 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L) | ||||
| CVE-2026-98190 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix out-of-bounds read in P2P public action frames wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once ieee80211_is_public_action() returns true. That helper only verifies the frame is long enough for the action category field, that is offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both functions then read the P2P public action header up to oui_subtype at offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32. A public action frame of 25 to 31 bytes passes the check but is shorter than that 32 byte header, so oui_subtype can be read out of bounds, and because the length is unsigned, "size - ie_offset" underflows to a value close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length, so even the size_t subtraction in mgmt_tx() is truncated to the same value. It then walks far past the buffer searching for a vendor element until it reaches unmapped memory. In the receive path the frame arrives over the air and needs no association, so a nearby unauthenticated device can crash the host while it is in P2P listen. Reject frames shorter than the P2P public action header in both paths before dereferencing it. | ||||
| CVE-2026-98191 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: release runtime PM ref on regdomain config failure wlcore_regdomain_config() gets a runtime PM reference before sending the regulatory-domain command. When wlcore_cmd_regdomain_config_locked() fails, the function queues recovery and returns without dropping that reference. Release the reference after handling the command result so both success and failure paths balance the preceding pm_runtime_resume_and_get(). The recovery worker takes a separate runtime PM reference and cannot release the reference held here. | ||||
| CVE-2026-105797 | 1 Microsoft | 1 Simplechat | 2026-10-07 | 8.8 High |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. In versions 0.261.003 and 0.261.027, an authorization ordering flaw in POST /api/user/plugins allows an authenticated low-privileged user to omit the top-level MCP type so that _reject_non_admin_mcp_stdio skips inspection before the type is restored from metadata. The stored personal action can then reach McpPluginFactory.create_connector, and MCPStdioPlugin.connect starts the attacker-selected operating-system process under the application service identity when the action tool is invoked. Exploitation requires personal plugins to be enabled and governance to permit MCP actions, and it can expose or modify secrets and data available to the service or disrupt the service. This issue is fixed in version 0.261.031. | ||||
| CVE-2026-105798 | 1 Microsoft | 1 Simplechat | 2026-10-07 | 8.7 High |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. Prior to 0.261.029, POST /api/group_documents/upload stores an attacker-controlled group document filename that group_workspaces.html later interpolates into inline Share event handlers. The escapeGroupHtml function leaves apostrophes unchanged, while escapeHtml produces an HTML entity that the browser decodes before JavaScript evaluation, so either path permits the filename to terminate the handler string. An authenticated group Owner, Admin, or DocumentManager can persist script that executes in the SimpleChat origin when another group member clicks Share, allowing access to victim-visible data and actions with the victim session. This issue is fixed in version 0.261.029. | ||||
| CVE-2026-63692 | 1 Dell | 1 Container Storage Modules | 2026-10-07 | 10 Critical |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. | ||||
| CVE-2026-54472 | 1 Dell | 1 Container Storage Modules | 2026-10-07 | 9.8 Critical |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Use of Hard-coded Credentials vulnerability in the csm-docs. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure.9.8 | ||||
| CVE-2026-61421 | 1 Dell | 1 Container Storage Modules | 2026-10-07 | 9.8 Critical |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Use of Hard-coded Credentials vulnerability in the CSM Authorization. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. | ||||
| CVE-2026-67273 | 1 Dell | 1 Container Storage Modules | 2026-10-07 | 9.6 Critical |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Improper Neutralization of Special Elements Used in a Template Engine vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. | ||||
| CVE-2026-61411 | 1 Dell | 1 Container Storage Modules | 2026-10-07 | 7.7 High |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Insertion of Sensitive Information into Log File vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. | ||||
| CVE-2026-63689 | 1 Dell | 1 Container Storage Modules | 2026-10-07 | 6.5 Medium |
| Dell Container Storage Modules, versions prior to 1.18.0, contain(s) an Insertion of Sensitive Information into Log File vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. | ||||