Export limit exceeded: 398098 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398098 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97479 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: driver core: Avoid warning when removing a device while its supplier is unbinding During driver removal, the following warning can appear: WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc ... Call trace: __device_links_no_driver+0xcc/0xfc (P) device_links_driver_cleanup+0xa8/0xf0 device_release_driver_internal+0x208/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c driver_detach+0xa0/0x12c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 pci_unregister_driver+0x20/0x9c lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci] This warning is triggered when a consumer is removed because the links status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag DL_FLAG_SYNC_STATE_ONLY is not set. The topology in terms of consumers/suppliers used was the following (consumer ---> supplier): i2c -----------> OIC ----> PCI device | ^ | | +---> pinctrl ---+ When the PCI device is removed, the OIC (interrupt controller) has to be removed. In order to remove the OIC, pinctrl and i2c need to be removed and to remove pinctrl, i2c need to be removed. The removal order is: 1) i2c 2) pinctrl 3) OIC 4) PCI device In details, the removal sequence is the following (with 0000:01:00.0 the PCI device): driver_detach: call device_release_driver_internal(0000:01:00.0)... device_links_busy(0000:01:00.0): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(0000:01:00.0): 0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(oic)... device_links_busy(oic): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(oic): oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(pinctrl)... device_links_busy(pinctrl): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(pinctrl): pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(i2c)... device_links_busy(i2c): links->status = DL_DEV_UNBINDING __device_links_no_driver(i2c)... pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND oic--i2c link->status is DL_STATE_ACTIVE oic--i2c link->supplier->links.status is DL_DEV_UNBINDING The warning is triggered by the i2c removal because the OIC (supplier) links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set to DL_DEV_UNBINDING. It is perfectly legit to have the links status set to DL_DEV_UNBINDING in that case. Indeed we had started to unbind the OIC which triggered the consumer unbinding and didn't finish yet when the i2c is unbound. Avoid the warning when the supplier links status is set to DL_DEV_UNBINDING and thus support this removal sequence without any warnings. | ||||
| CVE-2026-97480 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: protect against NULL uart->port.dev in register serial8250_register_8250_port() conditionally copies uart->port.dev from up->port.dev only when up->port.dev is non-NULL: if (up->port.dev) { uart->port.dev = up->port.dev; ... } So if both the existing uart slot and up have a NULL ->dev, uart->port.dev remains NULL. The very next ACPI companion check then dereferences it unconditionally: if (!has_acpi_companion(uart->port.dev)) { has_acpi_companion() reads dev->fwnode without a NULL guard (include/linux/acpi.h), so this NULL-derefs the kernel for the remaining no-dev case rather than just skipping the mctrl_gpio_init() initialisation as intended. smatch flags the inconsistency: drivers/tty/serial/8250/8250_core.c:767 serial8250_register_8250_port() error: 'uart->port.dev' could be null (see line 719) Guard the call with a NULL check so register continues to work for callers that legitimately have no parent device (legacy non-OF/non-ACPI registrations). No functional change for callers that pass a non-NULL ->dev. | ||||
| CVE-2026-97483 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: core: hcd: fix possible deadlock in rh control transfers >From within the SCSI error handler memory allocations must not trigger IO. Handling errors in UAS and the storage driver may involve resetting a device. The thread doing the reset itself relies on VM magic. However, that is insufficient, as resetting a device involves resuming it. Resumption as well as resetting involves conrol transfers to the parent of the device to be reset. That may be a root hub. Hence usbcore must heed the flags passed to usb_submit_urb() processing control transfers to root hubs. The problem exist since the storage driver has been merged. | ||||
| CVE-2026-88357 | 1 Ntop | 1 Ndpi | 2026-09-25 | 7.5 High |
| nDPI 5.1.0 contains a memory access issue in the DNS dissector and serializer deserialization code. Specially crafted network input can cause byte-buffer addresses at odd offsets to be cast to uint16_t or wider integer pointers and directly dereferenced without alignment checks. This results in undefined behavior and can cause process termination in UBSan-instrumented builds or on strict-alignment architectures, leading to denial of service. | ||||
| CVE-2026-97488 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: qnx4: handle set_blocksize failures qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97501 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take the pinctrl mutex. This causes a gpiochip operations to need to sleep. Worse yet, the .can_sleep field in the gpiochip is not set. This causes the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check whether it can use a spinlock or needs a mutex. In this case, it ends up taking a spinlock, then calls pinctrl_gpio_direction_output(), which takes a mutex. This causes a huge warning. While this class of Mediatek hardware does not have separate clear/set registers, the pinctrl context has a spinlock that is taken whenever a register read-modify-write is done. Also, once the GPIO function is selected / muxed in, further GPIO operations do not involve pinctrl operations or state. The GPIO direction and level values do not require toggling the pinmux or any other pin config options. Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO set direction callbacks to avoid taking the pinctrl mutex. Drop the .gpio_set_direction field in mtk_pmxops to signal we are no longer using the pinctrl GPIO layer for setting the direction. | ||||
| CVE-2026-97511 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds access in monitor In NAN, we don't know on what band the frame will be sent. Therefore we set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound access in ieee80211_add_tx_radiotap_header when we try to access the sbands array. Fix it by not accessing the array if the band is NUM_NL80211_BANDS. This means that we will not report rate info for legacy rate in NAN. But nobody really cares about it. | ||||
| CVE-2026-56737 | 1 Thorsten | 1 Phpmyfaq | 2026-09-25 | 8.1 High |
| phpMyFAQ is an open source FAQ web application. Versions 3.2.0 through 4.1.5 contain an authentication bypass in its public two-factor authentication verification flow: an unauthenticated attacker can submit an account’s numeric user ID and a valid or brute-forced six-digit TOTP code without first authenticating with the account password, allowing takeover of any 2FA-enabled account, including administrator accounts. Version 4.1.6 is patched by binding TOTP verification to a session established after successful password authentication and limiting failed TOTP attempts. No official workaround is documented; affected installations should upgrade to 4.1.6 or later. | ||||
| CVE-2026-83548 | 1 Sonicwall | 6 Sma1000, Sma6210, Sma6210 Firmware and 3 more | 2026-09-25 | 10 Critical |
| A Pre-authentication SSRF vulnerability exists in the SMA1000 Appliance Work Place interface due to an unintended alternate access path. A remote unauthenticated attacker could potentially exploit this vulnerability to gain unauthorized access to sensitive functionality and perform unauthorized operations. | ||||
| CVE-2026-67827 | 1 Zlmediakit | 1 Zlmediakit | 2026-09-25 | 9.8 Critical |
| Incorrect Access Control in the HTTP API module in ZLMediaKit commit 9fd5152 allows remote attackers to achieve Remote Code Execution (RCE) via unauthenticated access to the setServerConfig API endpoint, which permits overwriting the ffmpeg.snap configuration parameter with arbitrary shell commands. These commands are subsequently executed through the getSnap API endpoint with the privileges of the ZLMediaKit process. | ||||
| CVE-2026-77797 | 1 Rapid7 | 1 Velociraptor | 2026-09-25 | 3.6 Low |
| Velociraptor's prefetch library contains an out of bound vulnerability which may cause a crash when parsing certain malformed prefetch files. | ||||
| CVE-2026-56736 | 1 Thorsten | 1 Phpmyfaq | 2026-09-25 | 8.2 High |
| phpMyFAQ is an open source FAQ web application. A stored cross-site scripting (XSS) vulnerability in versions prior to 4.2.0-alpha allows any unauthenticated user (or low-privileged registered user) to inject arbitrary JavaScript that executes in an administrator's browser when they review or edit a user-submitted FAQ entry. This leads to admin account takeover via session theft. The vulnerability exists because `html_entity_decode()` converts HTML entities into executable HTML after `strip_tags()` has already passed them through, and the admin template renders the content with Twig's `|raw` filter without any output sanitization. Version 4.2.0-alpha fixes the issue. | ||||
| CVE-2026-7273 | 1 Zyxel | 20 Gs1900-10hp, Gs1900-10hp Firmware, Gs1900-16 and 17 more | 2026-09-25 | 8.8 High |
| A stack-based buffer overflow vulnerability in the CGI program of Zyxel GS1900-48HPv2 firmware versions through 2.90(ABTQ.1)C0 could allow a LAN-based, unauthenticated attacker to exploit the flaw and potentially execute OS commands via a crafted HTTP request. | ||||
| CVE-2026-85046 | 1 Google | 2 Chrome, V8 | 2026-09-25 | 8.8 High |
| Type confusion in V8 in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-87491 | 1 Google | 1 Chrome | 2026-09-25 | 8.8 High |
| Out of bounds write in V8 in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-79689 | 1 Dell | 1 Secure Connect Gateway | 2026-09-25 | 5.3 Medium |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. | ||||
| CVE-2026-63203 | 1 Logto-io | 1 Logto | 2026-09-25 | 7.6 High |
| Logto is the modern, open-source auth infrastructure for SaaS and AI apps. From 1.31.0 until 1.42.0, the Account API handlers in packages/core/src/routes/account/third-party-tokens.ts allow a caller holding a same-user access token with only the openid scope to retrieve stored social or enterprise SSO provider access tokens through GET /api/my-account/identities/{target}/access-token or GET /api/my-account/sso-identities/{connectorId}/access-token. The handlers authenticate the user but do not require the identities scope that protects neighboring identity-detail operations, bypassing the intended Account API consent boundary. Exploitation requires federated token-set storage to be enabled and the affected user to have authenticated through a supported connector. A low-trust application can use the disclosed provider token against upstream APIs within that token's granted scopes. This issue is fixed in version 1.42.0. | ||||
| CVE-2026-56739 | 1 Logto-io | 1 Logto | 2026-09-25 | N/A |
| Logto is the modern, open-source auth infrastructure for SaaS and AI apps. Prior to 1.43.0, Logto fetches administrator-controlled outbound destinations without validating the address used for the connection. Webhook delivery in packages/core/src/libraries/hook/utils.ts can reach special-use and cloud metadata addresses. Custom OAuth2 connectors can use an attacker-selected userInfoEndpoint and forward the OAuth access token in the Authorization header, while OIDC connectors can fetch an attacker-selected jwksUri. The affected operations require tenant administrative configuration access, but they cross the server's network boundary and can expose internal data or upstream provider credentials. This issue is fixed in version 1.43.0. | ||||
| CVE-2026-77581 | 1 Alam00000 | 1 Bentopdf | 2026-09-25 | 8.6 High |
| BentoPDF is a client-side PDF toolkit that is self hostable. In 2.8.6 and earlier, the certificate and timestamp CORS proxy in cloudflare/cors-proxy-worker.js uses isPrivateOrReservedHost() to validate a supplied hostname separately from the DNS resolution used by fetch(targetUrl), allowing an attacker-controlled hostname to resolve to an internal or reserved destination after validation. A certificate-like path can satisfy ALLOWED_PATH_PATTERNS, and direct clients can forge the browser-oriented Origin header. Deployments without PROXY_SECRET skip the optional signature check, while the signature is an anti-abuse measure rather than a destination-security boundary. The proxy has a 10 MB response limit and can relay response bodies from reachable destinations. The advisory identifies both the official Worker deployment and self-hosted instances as impacted where the Worker execution environment can reach internal or reserved destinations. This vulnerability is fixed in 2.8.7. | ||||
| CVE-2026-63630 | 1 Alam00000 | 1 Bentopdf | 2026-09-25 | 3.4 Low |
| BentoPDF is a client-side PDF toolkit that is self hostable. In 2.8.6 and earlier, deserializeWorkflow() accepts the Timestamp node's tsaUrl control from imported JSON without schema or destination validation. When a user imports the crafted workflow and runs it against a PDF, timestampPdf() sends an RFC 3161 TimeStampReq containing the PDF's SHA-256 MessageImprint to the attacker-selected endpoint. The default self-hosted configuration does not set VITE_CORS_PROXY_URL, so the request bypasses the proxy's ALLOWED_TSA_HOSTS checks and is sent directly. The disclosed digest can confirm that a document matches a known file and can correlate the same document across users without revealing its contents. This vulnerability is fixed in 2.8.7. | ||||