Export limit exceeded: 20844 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20844 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38589 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: neighbour: Fix null-ptr-deref in neigh_flush_dev(). kernel test robot reported null-ptr-deref in neigh_flush_dev(). [0] The cited commit introduced per-netdev neighbour list and converted neigh_flush_dev() to use it instead of the global hash table. One thing we missed is that neigh_table_clear() calls neigh_ifdown() with NULL dev. Let's restore the hash table iteration. Note that IPv6 module is no longer unloadable, so neigh_table_clear() is called only when IPv6 fails to initialise, which is unlikely to happen. [0]: IPv6: Attempt to unregister permanent protocol 136 IPv6: Attempt to unregister permanent protocol 17 Oops: general protection fault, probably for non-canonical address 0xdffffc00000001a0: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000d00-0x0000000000000d07] CPU: 1 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.12.0-rc6-01246-gf7f52738637f #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:neigh_flush_dev.llvm.6395807810224103582+0x52/0x570 Code: c1 e8 03 42 8a 04 38 84 c0 0f 85 15 05 00 00 31 c0 41 83 3e 0a 0f 94 c0 48 8d 1c c3 48 81 c3 f8 0c 00 00 48 89 d8 48 c1 e8 03 <42> 80 3c 38 00 74 08 48 89 df e8 f7 49 93 fe 4c 8b 3b 4d 85 ff 0f RSP: 0000:ffff88810026f408 EFLAGS: 00010206 RAX: 00000000000001a0 RBX: 0000000000000d00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffc0631640 RBP: ffff88810026f470 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffffc0625250 R14: ffffffffc0631640 R15: dffffc0000000000 FS: 00007f575cb83940(0000) GS:ffff8883aee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f575db40008 CR3: 00000002bf936000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __neigh_ifdown.llvm.6395807810224103582+0x44/0x390 neigh_table_clear+0xb1/0x268 ndisc_cleanup+0x21/0x38 [ipv6] init_module+0x2f5/0x468 [ipv6] do_one_initcall+0x1ba/0x628 do_init_module+0x21a/0x530 load_module+0x2550/0x2ea0 __se_sys_finit_module+0x3d2/0x620 __x64_sys_finit_module+0x76/0x88 x64_sys_call+0x7ff/0xde8 do_syscall_64+0xfb/0x1e8 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f575d6f2719 Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 06 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007fff82a2a268 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000557827b45310 RCX: 00007f575d6f2719 RDX: 0000000000000000 RSI: 00007f575d584efd RDI: 0000000000000004 RBP: 00007f575d584efd R08: 0000000000000000 R09: 0000557827b47b00 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000020000 R13: 0000000000000000 R14: 0000557827b470e0 R15: 00007f575dbb4270 </TASK> Modules linked in: ipv6(+) | ||||
| CVE-2025-38621 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: make rdev_addable usable for rcu mode Our testcase trigger panic: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Workqueue: md_misc md_start_sync RIP: 0010:rdev_addable+0x4d/0xf0 ... Call Trace: <TASK> md_start_sync+0x329/0x480 process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x14d/0x180 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: raid10 CR2: 00000000000000e0 ---[ end trace 0000000000000000 ]--- RIP: 0010:rdev_addable+0x4d/0xf0 md_spares_need_change in md_start_sync will call rdev_addable which protected by rcu_read_lock/rcu_read_unlock. This rcu context will help protect rdev won't be released, but rdev->mddev will be set to NULL before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by using READ_ONCE and check does rdev->mddev still alive. | ||||
| CVE-2024-58239 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tls: stop recv() if initial process_rx_list gave us non-DATA If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work. | ||||
| CVE-2025-38613 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: gpib: fix unset padding field copy back to userspace The introduction of a padding field in the gpib_board_info_ioctl is showing up as initialized data on the stack frame being copyied back to userspace in function board_info_ioctl. The simplest fix is to initialize the entire struct to zero to ensure all unassigned padding fields are zero'd before being copied back to userspace. | ||||
| CVE-2025-38606 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid accessing uninitialized arvif->ar during beacon miss During beacon miss handling, ath12k driver iterates over active virtual interfaces (vifs) and attempts to access the radio object (ar) via arvif->deflink->ar. However, after commit aa80f12f3bed ("wifi: ath12k: defer vdev creation for MLO"), arvif is linked to a radio only after vdev creation, typically when a channel is assigned or a scan is requested. For P2P capable devices, a default P2P interface is created by wpa_supplicant along with regular station interfaces, these serve as dummy interfaces for P2P-capable stations, lack an associated netdev and initiate frequent scans to discover neighbor p2p devices. When a scan is initiated on such P2P vifs, driver selects destination radio (ar) based on scan frequency, creates a scan vdev, and attaches arvif to the radio. Once the scan completes or is aborted, the scan vdev is deleted, detaching arvif from the radio and leaving arvif->ar uninitialized. While handling beacon miss for station interfaces, P2P interface is also encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter() tries to dereference the uninitialized arvif->deflink->ar. Fix this by verifying that vdev is created for the arvif before accessing its ar during beacon miss handling and similar vif iterator callbacks. ========================================================================== wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full) RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k] Call Trace: __iterate_interfaces+0x11a/0x410 [mac80211] ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211] ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k] ath12k_roam_event+0x393/0x560 [ath12k] ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k] ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k] ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k] ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k] ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k] ath12k_pci_ce_workqueue+0x69/0x120 [ath12k] process_one_work+0xe3a/0x1430 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-38636 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200 trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0 This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g. the next automaton's data in this case). The error is harmless as, while printing the string, we stop at the null terminator, but it should still be fixed. Use the __string facilities while defining the tracepoints to avoid reading out of bound memory. | ||||
| CVE-2025-38632 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned. | ||||
| CVE-2025-38631 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: imx95-blk-ctl: Fix synchronous abort When enabling runtime PM for clock suppliers that also belong to a power domain, the following crash is thrown: error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP Workqueue: events_unbound deferred_probe_work_func pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : clk_mux_get_parent+0x60/0x90 lr : clk_core_reparent_orphans_nolock+0x58/0xd8 Call trace: clk_mux_get_parent+0x60/0x90 clk_core_reparent_orphans_nolock+0x58/0xd8 of_clk_add_hw_provider.part.0+0x90/0x100 of_clk_add_hw_provider+0x1c/0x38 imx95_bc_probe+0x2e0/0x3f0 platform_probe+0x70/0xd8 Enabling runtime PM without explicitly resuming the device caused the power domain cut off after clk_register() is called. As a result, a crash happens when the clock hardware provider is added and attempts to access the BLK_CTL register. Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable() and getting rid of the pm_runtime_disable() in the cleanup path. | ||||
| CVE-2025-38629 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: scarlett2: Fix missing NULL check scarlett2_input_select_ctl_info() sets up the string arrays allocated via kasprintf(), but it misses NULL checks, which may lead to NULL dereference Oops. Let's add the proper NULL check. | ||||
| CVE-2025-38628 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix release of uninitialized resources on error path The commit in the fixes tag made sure that mlx5_vdpa_free() is the single entrypoint for removing the vdpa device resources added in mlx5_vdpa_dev_add(), even in the cleanup path of mlx5_vdpa_dev_add(). This means that all functions from mlx5_vdpa_free() should be able to handle uninitialized resources. This was not the case though: mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx() were not able to do so. This caused the splat below when adding a vdpa device without a MAC address. This patch fixes these remaining issues: - Makes mlx5_vdpa_destroy_mr_resources() return early if called on uninitialized resources. - Moves mlx5_cmd_init_async_ctx() early on during device addition because it can't fail. This means that mlx5_cmd_cleanup_async_ctx() also can't fail. To mirror this, move the call site of mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free(). An additional comment was added in mlx5_vdpa_free() to document the expectations of functions called from this context. Splat: mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned? ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0 [...] Call Trace: <TASK> ? __try_to_del_timer_sync+0x61/0x90 ? __timer_delete_sync+0x2b/0x40 mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa] genl_family_rcv_msg_doit+0xd8/0x130 genl_family_rcv_msg+0x14b/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] genl_rcv_msg+0x47/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x27b/0x3b0 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x1fa/0x210 ? ___pte_offset_map+0x17/0x160 ? next_uptodate_folio+0x85/0x2b0 ? percpu_counter_add_batch+0x51/0x90 ? filemap_map_pages+0x515/0x660 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x7b/0x2c0 ? do_read_fault+0x108/0x220 ? do_pte_missing+0x14a/0x3e0 ? __handle_mm_fault+0x321/0x730 ? count_memcg_events+0x13f/0x180 ? handle_mm_fault+0x1fb/0x2d0 ? do_user_addr_fault+0x20c/0x700 ? syscall_exit_work+0x104/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0c25b0feca [...] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-38625 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pds: Fix missing detach_ioas op When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci driver, the following WARN_ON() trace is seen and probe fails: WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio] <...> pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22 This is because the driver's vfio_device_ops.detach_ioas isn't set. Fix this by using the generic vfio_iommufd_physical_detach_ioas function. | ||||
| CVE-2025-38646 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid NULL dereference when RX problematic packet on unsupported 6 GHz band With a quite rare chance, RX report might be problematic to make SW think a packet is received on 6 GHz band even if the chip does not support 6 GHz band actually. Since SW won't initialize stuffs for unsupported bands, NULL dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() -> rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it. The following is a crash log for this case. BUG: kernel NULL pointer dereference, address: 0000000000000032 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4) Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024 RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core] Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11 41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45 32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85 RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246 RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011 RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6 RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000 R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4 R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)] __iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)] rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)] rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)] | ||||
| CVE-2025-38642 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix WARN_ON for monitor mode on some devices On devices without WANT_MONITOR_VIF (and probably without channel context support) we get a WARN_ON for changing the per-link setting of a monitor interface. Since we already skip AP_VLAN interfaces and MONITOR with WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update the settings, catch this in the link change code instead of the warning. | ||||
| CVE-2025-38656 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start() Preserve the error code if iwl_setup_deferred_work() fails. The current code returns ERR_PTR(0) (which is NULL) on this path. I believe the missing error code potentially leads to a use after free involving debugfs. | ||||
| CVE-2025-38655 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: add NULL check in DT parse Add a NULL check for the return value of of_get_property() when retrieving the "pinmux" property in the group parser. This avoids a potential NULL pointer dereference if the property is missing from the device tree node. Also fix a typo ("sintenel") in the device ID match table comment, correcting it to "sentinel". | ||||
| CVE-2025-38654 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix order of DT parse and pinctrl register Move DT parse before pinctrl register. This ensures that device tree parsing is done before calling devm_pinctrl_register() to prevent using uninitialized pin resources. | ||||
| CVE-2025-38651 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix warning from KUnit tests get_id_range() expects a positive value as first argument but get_random_u8() can return 0. Fix this by clamping it. Validated by running the test in a for loop for 1000 times. Note that MAX() is wrong as it is only supposed to be used for constants, but max() is good here. [..] ok 9 test_range2_rand1 [..] ok 10 test_range2_rand2 [..] ok 11 test_range2_rand15 [..] ------------[ cut here ]------------ [..] WARNING: CPU: 6 PID: 104 at security/landlock/id.c:99 test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Modules linked in: [..] CPU: 6 UID: 0 PID: 104 Comm: kunit_try_catch Tainted: G N 6.16.0-rc1-dev-00001-g314a2f98b65f #1 PREEMPT(undef) [..] Tainted: [N]=TEST [..] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [..] RIP: 0010:test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Code: 49 c7 c0 10 70 30 82 4c 89 ff 48 c7 c6 a0 63 1e 83 49 c7 45 a0 e0 63 1e 83 e8 3f 95 17 00 e9 1f ff ff ff 0f 0b e9 df fd ff ff <0f> 0b ba 01 00 00 00 e9 68 fe ff ff 49 89 45 a8 49 8d 4d a0 45 31 [..] RSP: 0000:ffff888104eb7c78 EFLAGS: 00010246 [..] RAX: 0000000000000000 RBX: 000000000870822c RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ [..] [..] Call Trace: [..] [..] ---[ end trace 0000000000000000 ]--- [..] ok 12 test_range2_rand16 [..] # landlock_id: pass:12 fail:0 skip:0 total:12 [..] # Totals: pass:12 fail:0 skip:0 total:12 [..] ok 1 landlock_id [mic: Minor cosmetic improvements] | ||||
| CVE-2025-38649 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: qcs615: fix a crash issue caused by infinite loop for Coresight An infinite loop has been created by the Coresight devices. When only a source device is enabled, the coresight_find_activated_sysfs_sink function is recursively invoked in an attempt to locate an active sink device, ultimately leading to a stack overflow and system crash. Therefore, disable the replicator1 to break the infinite loop and prevent a potential stack overflow. replicator1_out -> funnel_swao_in6 -> tmc_etf_swao_in -> tmc_etf_swao_out | | replicator1_in replicator_swao_in | | replicator0_out1 replicator_swao_out0 | | replicator0_in funnel_in1_in3 | | tmc_etf_out <- tmc_etf_in <- funnel_merg_out <- funnel_merg_in1 <- funnel_in1_out [call trace] dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 panic+0x340/0x3b0 nmi_panic+0x94/0xa0 panic_bad_stack+0x114/0x138 handle_bad_stack+0x34/0xb8 __bad_stack+0x78/0x80 coresight_find_activated_sysfs_sink+0x28/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] ... coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_enable_sysfs+0x80/0x2a0 [coresight] side effect after the change: Only trace data originating from AOSS can reach the ETF_SWAO and EUD sinks. | ||||
| CVE-2025-38648 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: stm32: Check for cfg availability in stm32_spi_probe The stm32_spi_probe function now includes a check to ensure that the pointer returned by of_device_get_match_data is not NULL before accessing its members. This resolves a warning where a potential NULL pointer dereference could occur when accessing cfg->has_device_mode. Before accessing the 'has_device_mode' member, we verify that 'cfg' is not NULL. If 'cfg' is NULL, an error message is logged. This change ensures that the driver does not attempt to access configuration data if it is not available, thus preventing a potential system crash due to a NULL pointer dereference. | ||||
| CVE-2022-50251 | 1 Linux | 1 Linux Kernel | 2025-11-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, the timer added before mmc_add_host() needs be del. And this patch fixes another missing call mmc_free_host() if usb_control_msg() fails. | ||||