Export limit exceeded: 409735 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409735 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409735 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409735 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98579 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was already queued. Route them through a new free_list label, mirroring the SDRES path in the same file which already does this. Harmless on the success path too -- send_snl_sdreq() drains the list as it moves nodes, so it's already empty by the time free_list runs. | ||||
| CVE-2026-98578 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ISO15693 inventory length The ISO15693 inventory helper removes a two-byte prefix without checking that it exists, then accepts a one-byte remainder before reading data[1] as the DSFID. Require the prefix and at least two remaining bytes before copying the UID data and reading the DSFID. | ||||
| CVE-2026-98577 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix WKS SAP hijacking via prefix match in nfc_llcp_wks_sap() nfc_llcp_wks_sap() compares only service_name_len bytes, so a short service_name like "u" matches longer WKS strings like "urn:nfc:sn:snep". Fix by requiring exact length match before strncmp(). | ||||
| CVE-2026-98576 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix slab-out-of-bounds reads when logging service names nfc_llcp_wks_sap() and nfc_llcp_build_sdreq_tlv() pass non-null- terminated strings to pr_debug() using the %s format specifier. The buffers are allocated via kmemdup() or come from netlink attributes and are not guaranteed to be null-terminated, causing __dynamic_pr_debug() to read beyond the allocated region: KASAN: slab-out-of-bounds Read in __dynamic_pr_debug Fix both call sites by using %.*s with the explicit length to limit the output to the actual length of the string. | ||||
| CVE-2026-98575 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid() frame->ccid.datalen is read directly from the USB response frame and used, unchecked, as an index into frame->data[]. A malicious or malfunctioning device can set this field to an arbitrary value, causing the driver to read far outside the received buffer. Bound ccid.datalen against the maximum possible ACR122 frame size before using it. This replaces the existing datalen == 0 check, since datalen < 2 already covers that case and additionally rejects datalen == 1, which would still underflow the "datalen - 2" offset used below. | ||||
| CVE-2026-98574 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: stop Tx NAPI before disabling the queues bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend() both disable the Tx queues first and stop Tx NAPI several steps later. A completion in flight calls netif_tx_wake_queue() in between, and nothing stops the queue again, so a transmit can reach the rings after they have been freed. Close is safe because dev_deactivate_many() stops the qdisc first. bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both paths. KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend freezes user space before the callback runs: BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258 Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14 bcmgenet_xmit+0x17f8/0x2258 dev_hard_start_xmit+0x13c/0x588 sch_direct_xmit+0x108/0x340 __dev_queue_xmit+0x1190/0x3848 | ||||
| CVE-2026-98573 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative. | ||||
| CVE-2026-98572 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix immediate JMP JEQ/JNE on MIPS32 An addu instruction was emitted instead of addiu, causing the immediate value 1 to be interpreted as register $at. This made the comparison result invalid when the immediate operand was negative. Note that $at is mapped to BPF_REG_AX, which is used for constant blinding. Fix the instruction to use the immediate form. Found with test_bpf on MIPS32r1 emulated by QEMU. | ||||
| CVE-2026-98571 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: clear stale buf->page after recycling on skb build failure In stmmac_rx(), when napi_build_skb() fails the descriptor page is recycled back to the page pool with page_pool_recycle_direct(), but buf->page is left pointing at the recycled page, unlike every other consumption site in the function which clears the pointer after handing the page away. With the stale pointer stmmac_rx_refill() skips the replacement allocation and programs the already-recycled page back into the RX descriptor. Clear buf->page on the napi_build_skb() failure path to keep the buffer lifecycle consistent with the other consumption sites. | ||||
| CVE-2026-98570 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn. | ||||
| CVE-2026-98569 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ip_gre: Reject enabling collect metadata through changelink ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP or ERSPAN device. Unlike newlink, changelink does not enforce metadata tunnel uniqueness. Converting a non-metadata device can therefore replace the metadata receive entry for another device of the same type in the same netns. Deleting either device then clears the shared entry, breaking metadata receive lookup for the surviving device. If parameter validation fails after collect_md is set, deleting the modified device can also clear an entry it never owned. Reject enabling metadata mode in both changelink callbacks before any encapsulation or tunnel parameters are modified. Allow requests that repeat the metadata attribute on an existing metadata device. | ||||
| CVE-2026-98568 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use one headroom snapshot for neighbour replies vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then samples it again to reserve headroom. A concurrent vxlan_changelink() can update needed_headroom between the two reads, creating a TOCTOU race. The second value can exceed the allocation and make the Ethernet header write out of bounds. The race is reproducible on the unpatched kernel. It occurred when vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte skbuff_small_head allocation. Snapshot the headroom once and use that value for both allocation and reservation. | ||||
| CVE-2026-98567 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: xps: reject an out of range traffic class Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc() lowers dev->num_tc without touching either array. netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and netdev_get_prio_tc_map() returns the entry as it stands, so a leftover entry is handed out as a traffic class >= dev->num_tc. Taking that class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a negative one and indexes an XPS map sized for dev->num_tc classes: tci = j * num_tc + tc; RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map); attr_map[] holds nr_ids * num_tc entries and j runs over the ids named in the mask, so a class that is not below num_tc pushes tci past the end of the map for the last ids and the store overruns it. Any caller that lowers num_tc leaves such entries behind, and mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7] still describe txq 1..7. The splat is from an XPS write to txq 2 on a veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and j == 6 stores one past the end of the 88-byte map: BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954) Write of size 8 at addr ffff88813016bc58 by task xps_oob/634 __netif_set_xps_queue (net/core/dev.c:2954) xps_rxqs_store (net/core/net-sysfs.c:1880) netdev_queue_attr_store (net/core/net-sysfs.c:1390) Allocated by task 634: __kmalloc_noprof (mm/slub.c:5439) __netif_set_xps_queue (net/core/dev.c:2937) The buggy address is located 0 bytes to the right of allocated 88-byte region [ffff88813016bc00, ffff88813016bc58) Reject a class the map has no room for. | ||||
| CVE-2026-98566 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: clamp freelist reconstruction requests The firmware reconstruction count controls accesses to the request's fixed freelist ID array and the copy into the fixed response array. Neither access currently bounds the count to those protocol arrays. Clamp the count to the request capacity, which is shared by the response layout, and use that count consistently for reconstruction and response publication. Keep the firmware recovery exchange instead of dropping an oversized request without a response, as discussed with the firmware maintainer. The issue was found by our static-analysis tool. | ||||
| CVE-2026-98565 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621 The core and io supplies are only requested for ID_MT7530: both the devm_regulator_get() in probe and the regulator_enable() in mt7530_setup() are guarded by the switch id, but mt7530_remove() disables them unconditionally. On an MT7621 or an MT7531 both pointers are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls regulator_disable() on NULL. | ||||
| CVE-2026-98564 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: leave the MDIO IRQ mappings to regmap-irq mt7530_remove_common() disposes the per-PHY interrupt mappings from .remove, but the regmap-irq chip that owns the domain is devm-registered, so its parent interrupt is only freed once .remove has returned. The switch's own regmap-irq thread can therefore still dispatch on a mapping that is already gone: irq_find_mapping() returns 0, irq_to_desc() returns NULL and handle_nested_irq() locks desc->lock without checking it. The attached PHYs have not given those interrupts back yet either, which the kernel warns about a moment before the fault. regmap_del_irq_chip() disposes the same mappings itself, after freeing the parent interrupt and before removing the domain, so there is nothing left for the driver to do here. Until it runs the descriptors stay alive, and a late dispatch on one of them is harmless: dsa_unregister_switch() has freed the PHY handlers by then, so handle_nested_irq() finds no action and returns. | ||||
| CVE-2026-98563 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: phylink: record the PHY only once bringup cannot fail phylink_bringup_phy() stores the PHY in pl->phydev before its last fallible step: on a MAC whose phylink ops implement LPI, phy_eee_rx_clock_stop() can fail with a real MDIO error. The callers unwind with phy_detach(), which knows nothing about pl->phydev, so a pointer to a PHY that is no longer attached outlives the failed connect. What that costs depends on how the caller got here. phylink_connect_phy() goes through phylink_attach_phy(), which refuses to attach while pl->phydev is set, turning a transient MDIO error into a permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy() answers the failure with phy_device_remove() and phy_device_free(), and it assigns sfp->mod_phy only past that error return, so nothing clears pl->phydev and it is left pointing at a freed phy_device that phylink_resolve() and the ethtool helpers go on reading. phylink_fwnode_phy_connect() has no such check, so a later connect overwrites the stale pointer and hides the problem. A disconnect does not: phylink_disconnect_phy() hands that pointer to phy_disconnect(), and the second phy_detach() on the same PHY drops references the first one already released. Found while making a DSA port survive a PHY whose driver arrives after the switch probes: keeping the port across a failed connect and retrying is what makes this window reachable. Publish the pointer after the last call that can fail instead of unwinding it afterwards. Nothing between the two points reads pl->phydev, and the registration that follows cannot fail: phy_request_interrupt() falls back to polling on its own. The PHY-side state keeps the order it had, so no MDIO operation moves relative to another. | ||||
| CVE-2026-98562 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix races in Tx timestamp handling wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one. | ||||
| CVE-2026-98561 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: hold IPsec RX state under the XArray lock nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the xfrm_state it found. The delete path can erase the entry and drop the last state reference in that interval. RX can then try to increment a zero refcount after the state has been queued for destruction. The driver queues firmware invalidation asynchronously; the delete path does not wait for the command to complete or drain pending RX processing. The XFRM garbage collector waits for an RCU grace period before freeing the state. That delays reclamation but does not make acquiring a reference from zero valid. Take the xfrm_state reference before releasing the XArray lock so xa_erase() cannot run between lookup and reference acquisition. | ||||
| CVE-2026-98560 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: size a connection's path set by the transport it ends up with __rds_conn_create() computes npaths from the caller's transport before it decides whether a connection to one of the host's own addresses is to be handled by the loopback transport instead. That substitution is what an RDS/TCP socket sending to a local address gets, and after it the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS paths and allocates an ordered workqueue for each, while rds_loop_conn_alloc() only ever provides transport data for path 0. rds_conn_destroy() sizes its teardown from c_trans, by then the loopback transport, so it visits path 0 only - and rds_conn_path_destroy() would skip the other paths anyway, since it returns before destroy_workqueue() for a path without transport data. kfree(c_path) then drops the last pointers to seven workqueues. That repeats for every such connection, on every netns teardown or module unload, and every distinct local destination address is a separate connection. Recompute npaths once the transport is final, so that creation and destruction agree on the set of paths. The c_path array stays sized for the caller's transport; the unused entries are freed with it. | ||||