Export limit exceeded: 402163 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402163 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98298 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg() In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist putting each entry into 'sg', but the entry length is read from 'sgl' (the list head) instead of 'sg' (the current entry): for_each_sg(sgl, sg, sg_len, i) { addr = sg_dma_address(sg); avail = sg_dma_len(sgl); /* should be 'sg' */ Consequently 'avail' is always the length of the first entry. For multi-sg lists this causes out-of-bounds reads when a later entry is shorter than the first, and silent data loss when it is longer. Single-sg or uniformly-sized lists happen to mask the issue. | ||||
| CVE-2026-106218 | 2026-10-06 | 8.8 High | ||
| In JetBrains TeamCity before 2026.1.3 2025.11.7 kotlin DSL sandbox escape leading to RCE on the server was possible | ||||
| CVE-2026-106118 | 2026-10-06 | 7.5 High | ||
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, tiled TIFF decoding allocates a destination buffer using TileWidth but TiffDecompressorsFactory.Create constructs T4, T6, and Modified Huffman decompressors using the full frame width. TiffDecoderCore.DecodeTilesChunky can therefore direct frame-width fax scanlines into a tile-width buffer when TileWidth is smaller than ImageWidth. The mismatch causes attacker-controlled out-of-bounds writes, heap corruption, and process termination even with legal per-row run codes. This tiled-path vulnerability is distinct from oversized CCITT runs in strip decoding. This issue is fixed in version 4.1.1. | ||||
| CVE-2026-9812 | 1 Mattermost | 2 Mattermost, Mattermost Server | 2026-10-06 | 6.5 Medium |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to validate that a property field belongs to the specified run before updating its value which allows an authenticated user with run property-management access to crash the Playbooks plugin via a REST request referencing a property field that belongs to a different run. Mattermost Advisory ID: MMSA-2026-00684 | ||||
| CVE-2026-66666 | 2026-10-06 | N/A | ||
| Insertion of Sensitive Information Into Sent Data vulnerability in Automattic WordPress wordpress allows Retrieve Embedded Sensitive Data.This issue affects WordPress: from n/a through 7.1.2. | ||||
| CVE-2026-106117 | 2026-10-06 | 7.5 High | ||
| ImageSharp is a 2D graphics library. From 3.0.0 until 4.1.1, decoding a strip TIFF using CCITT Group 3 or Modified Huffman compression can pass attacker-expanded runs to BitWriterUtils.WriteBits without first checking the current row width. T4TiffCompression.WritePixelRun can accumulate oversized makeup-code runs, and ModifiedHuffmanTiffCompression.Decompress validates the width only after writing. The unchecked writes can overflow the strip buffer, corrupt heap memory, and terminate the process. This strip-path vulnerability is distinct from the tiled decompressor-width mismatch. This issue is fixed in version 4.1.1. | ||||
| CVE-2026-106116 | 2026-10-06 | 5.3 Medium | ||
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, ExifReader.ReadValues64 trusts the 64-bit BigTIFF IFD entry count and iterates once per declared entry. When fewer than 20 bytes remain, ExifReader.ReadValue64 returns without advancing the stream or terminating the outer loop, so a small malformed BigTIFF can keep one decoder thread executing for an attacker-controlled duration. This report does not claim worker-pool exhaustion. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-88252 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-10-06 | 4.7 Medium |
| A flaw was found in sssd. A local user can cause a Denial of Service (DoS) by exhausting the responder service's available file descriptors (system handles used for open connections). By opening and maintaining many concurrent connections to a responder socket while continuing to queue new connection attempts, an attacker can trigger an unthrottled retry loop. This condition leads to high CPU utilization and stalls the service, preventing legitimate identity and authentication requests from being processed. | ||||
| CVE-2026-106115 | 2026-10-06 | 7.5 High | ||
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106114 | 2026-10-06 | 5.3 Medium | ||
| ImageSharp is a 2D graphics library. From 1.0.0-beta0001 until 4.1.2, ICC CLUT parsing calculates allocation sizes from attacker-declared channel and grid dimensions before confirming that the profile contains the declared values. IccDataReader.ReadClutF32 can request a large float array, and earlier public IccProfile.Entries parsing paths can allocate a large jagged representation, from a short truncated profile. In version 4, automatic image conversion reaches the parser when DecoderOptions.ColorProfileHandling is Convert; the default Preserve mode avoids that conversion path. The demonstrated impact is memory pressure and input-validation failure, not unhandled process termination. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106113 | 2026-10-06 | 7.5 High | ||
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, decoding an attacker-supplied 32-bit floating-point TIFF as Image<HalfVector4> and applying HistogramEqualization can produce a non-finite or out-of-range luminance in ColorNumerics.GetBT709Luminance. GrayscaleLevelsRowOperation.Invoke uses the resulting value as an unchecked histogram offset, causing an unsafe out-of-range access and process termination. Adaptive Histogram Equalization and AutoLevel are not affected by this report. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106112 | 2026-10-06 | 7.5 High | ||
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-98300 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv(). tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around sk->sk_forward_alloc"). However, there is still a small race window between tcp_v6_rcv() and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN to TCP_CLOSE, causing skb_clone_and_charge_r() to be called locklessly and resulting in the splat below. [0] Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well. This is fine for non-listeners because tcp_rcv_state_process() drops skb for TCP_CLOSE and opt_skb was freed immediately anyway. [0]: sk->sk_forward_alloc WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28 Modules linked in: CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162 Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41 RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005 RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000 R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0 Call Trace: <TASK> __sk_destruct+0x82/0xae0 net/core/sock.c:2356 rcu_do_batch kernel/rcu/tree.c:2645 [inline] rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622 run_ksoftirqd kernel/softirq.c:1076 [inline] run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068 smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160 kthread+0x396/0x4a0 kernel/kthread.c:436 ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-98301 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: move switchdev call outside rcu This is a follow-up of one of sashiko's pre-existing bug reports. br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs while holding rcu_read_lock() which invokes the blocking switchdev notifier chain and may sleep. Nonzero MSTI changes come from netlink with rtnl held. Move the switchdev call before entering the rcu section and assert that rtnl is held. The call cannot be deferred because netlink needs its error and extack. Also DSA reads the old bridge MST state during the callback and checks it. A deferred callback will be late and will see the updated state. | ||||
| CVE-2026-98302 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp] Read of size 8 at addr 0000000000000010 by task ip/302 Call Trace: <TASK> mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] netif_set_mac_address+0x1e4/0x2c0 do_setlink+0x684/0x2680 </TASK> Address 0x10 is the offset of tx_curr_get, the third pointer in struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which ResetAdapter() calls immediately afterwards, dereferences smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective hw_state test; the transmit queue merely crashes first. Both are covered by the guard below. Skip the adapter reset when the interface is down. dev_addr_set() is left unconditional, so the new address is still recorded in dev->dev_addr. Nothing is lost by not resetting the adapter here: skfp_open() deliberately re-reads the factory address on every open, read_address(smc, NULL); eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a); and the comment above it states this is done to discard exactly such an address override across a close/open cycle. An address set while the interface is down could not have survived the following open even before this change, so the guard removes no working behaviour. Guarding the hardware side of ndo_set_mac_address() with netif_running() is established practice; skge_set_mac_address() has done so since commit 2eb3e621c4e0 ("skge: set mac address bonding fix"). Guarding the reset as a whole, rather than NULL-checking the queues, is also what the rest of the driver expects. After a previous open/close the queue pointers are stale but non-NULL, so there is no crash, yet ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable Board Interrupts") while skfp_close() has already called free_irq() - the adapter would be brought back online with no handler installed. The only other ResetAdapter() caller is skfp_interrupt(), which by construction runs only while the device is open. Found by automated driver testing against an emulated SysKonnect FDDI adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires CAP_NET_ADMIN. | ||||
| CVE-2026-98304 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops every rule off the list, and bcmgenet_open() calls it on each ifup. Every rule the user configured is silently lost: # ethtool -N eth0 flow-type ether dst $MAC action 0 Added rule with ID 0 # ethtool -n eth0 | grep -c Filter: 1 # ip link set eth0 down && ip link set eth0 up # ethtool -n eth0 | grep -c Filter: 0 Initialise the lists once at probe and restore the rules on open, as bcmgenet_resume() already does. | ||||
| CVE-2026-98306 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arrives on an interface enslaved to a VRF, vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate() has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of a reassembled outer packet could even set it, with no VRF involved. Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP decapsulation") then made the unreliable bit reliably clear. The effect of the missing flag is visible with End.DX4 when a delivery to a local address of the node reaches the socket lookup. For example, a UDP socket bound to the enslaved ingress interface does not receive any of the decapsulated packets, while an unbound socket outside the VRF does. This contradicts Documentation/networking/vrf.rst: by default the scope of an unbound UDP or TCP socket is limited to the default VRF. Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does the same for IPv6. The socket lookup then matches the decapsulated packet like any other packet received on that enslaved interface. Such a packet matches an unbound UDP or TCP socket only when udp_l3mdev_accept or tcp_l3mdev_accept is set. | ||||
| CVE-2026-98307 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all() When mac80211 removes a sta, it calls .sta_state() which in turn calls ath11k_mac_station_remove(). In that function we clean up both peers & arsta related resources. But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which assumes that all driver related resources are cleaned up beforehand. This cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not in fact free arsta->rx_stats / tx_stats. Extract the arsta cleanup from ath11k_mac_station_remove() into a new ath11k_mac_station_cleanup() and call it from both there and ath11k_mac_peer_cleanup_all(). This should handle kmemleaks reports like: unreferenced object 0xffffff801ae66400 (size 1024): comm "hostapd", pid 1306, jiffies 4295011565 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc d61c08ec): kmemleak_alloc+0x3c/0x50 __kmalloc_cache_noprof+0x2b0/0x3e0 ath11k_mac_op_sta_state+0x1dc/0xb10 drv_sta_state+0xac/0x6f8 sta_info_insert_rcu+0x314/0x5e0 sta_info_insert+0x14/0x38 ieee80211_add_station+0x10c/0x1a0 nl80211_new_station+0x3e8/0x680 genl_family_rcv_msg_doit+0xc0/0x120 genl_rcv_msg+0x1b4/0x258 netlink_rcv_skb+0x4c/0x108 genl_rcv+0x38/0x60 netlink_unicast+0x190/0x278 netlink_sendmsg+0x15c/0x370 ____sys_sendmsg+0x120/0x290 ___sys_sendmsg+0x70/0xa0 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2026-98309 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides no matching drm_kms_helper_poll_fini(). The output poll work stays scheduled after unbind and runs on the freed drm_device: # modprobe vc4; rmmod vc4; sleep 10 BUG: KASAN: slab-use-after-free in delayed_work_timer_fn BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm] Workqueue: events output_poll_execute [drm_kms_helper] Allocated by task 171: __devm_drm_dev_alloc Freed by task 262 (rmmod): drm_dev_put / component_del Use drmm_kms_helper_poll_init() so polling is finalized with the device, as other drivers do. | ||||
| CVE-2026-98311 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: don't transfer operstate before register virt_wifi_newlink() calls netif_stacked_transfer_operstate() before register_netdevice(). If the lower device is dormant, that queues the new netdev on lweventlist while it is still uninitialized. If registration fails after that, for example because of an invalid name such as "bad/name", free_netdev() immediately frees the object. A later linkwatch_fire_event() then use-after-frees the list entry. Move the transfer to after netdev_upper_dev_link(), as macvlan and ipvlan already do. | ||||