Export limit exceeded: 412676 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412676 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412676 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412676 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412676 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89676 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix stale s2s_cp_stateids IDR entry for async COPY For an async COPY, nfsd4_copy() called nfs4_init_copy_state() before dup_copy_fields(), so the s2s_cp_stateids IDR was pointed at &u->copy->cp_stateid -- memory in the per-rqstp COMPOUND buffer that is reused by the next request. dup_copy_fields() copies only the value into async_copy, so the IDR slot dangled at the transient buffer for the whole background copy. Any IDR walker then dereferences reused request memory: the laundromat reads cs_type from it and, if the bytes look like an expired NFS4_COPYNOTIFY_STID, follows into refcount_dec()/idr_remove()/kfree() on garbage; manage_cpntf_state() has the same exposure via idr_find(). Duplicate the fields first, then register the stateid on the stable async_copy. result->cb_stateid is unchanged. | ||||
| CVE-2026-89666 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD carrying an atime or mtime whose nseconds field is out of range. The value is well-formed on the wire and decodes cleanly into a valid uint32, but it is not a valid timespec64: tv_nsec must be less than NSEC_PER_SEC. Nothing in the setattr path clamps it. notify_change() runs the time through timestamp_truncate(), which does not reduce tv_nsec below NSEC_PER_SEC when the filesystem supports nanosecond granularity (s_time_gran == 1), and the inode atime/mtime setters store it verbatim (only ctime is normalized, via inode_set_ctime_to_ts()). The un-normalized value then corrupts on-disk metadata: ext4's ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which overflows the 32-bit extra field and clobbers the seconds-epoch bits, so the stored seconds (and thus the year) are wrong on read-back. XFS with bigtime mis-stores the timestamp for the same reason. Validate the client-supplied atime/mtime in the proc handlers and return NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL for SETATTR and describes it as the error for a value the server 'can not store ... in its own representation'; the client maps it to EINVAL. Checking in the proc handlers, rather than in nfsd_setattr(), keeps the rejection in front of object creation. The create operations create the object before nfsd_create_setattr() runs, so a late failure would leave the new object behind and turn a non-idempotent request into a namespace change that reports failure. The check is therefore done up front, for the create operations before the object is created. tv_nsec is a long, so the comparison casts it to unsigned long (the same width) rather than to u32, matching timespec64_valid(). A u32 cast would truncate on 64-bit; the unsigned long cast also rejects a value that became negative when an out-of-range u32 wire nseconds was assigned to a 32-bit long. Only client-supplied times are checked: SET_TO_SERVER_TIME requests carry no client value. The sattrguard3 ctime is deliberately left alone: an out-of-range guard simply never matches the object's ctime and yields NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the protocol-correct outcome rather than rejecting the request. | ||||
| CVE-2026-89659 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during delegation revoke A delegation stateid holds only a bare pointer to its owning nfs4_client and does not keep it alive. The client survives its stateids only because __destroy_client() drains cl_delegations and cl_revoked before free_client() runs. nfs4_laundromat() breaks that invariant: it unhashes an expired delegation from cl_delegations, drops deleg_lock, then revoke_delegation() relinks it onto cl_revoked under cl_lock. In that window the delegation is on neither list, so client_has_state() can report no remaining state. Every teardown path first requires cl_rpc_users to be zero, but the laundromat holds no such reference. A client whose recalled delegation has just timed out can therefore reach free_client() while revoke_delegation() is still about to dereference cl_lock, a use-after-free. Pin the client with cl_rpc_users across the revoke so teardown blocks until it completes, then reap the delegation from cl_revoked. A client already expiring reaps its own, so skip it and leave the delegation on del_recall_lru. | ||||
| CVE-2026-89654 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in check_new_map() on session freed during unlock check_new_map() iterates mdsc->sessions[] and for each active session drops mdsc->mutex to perform per-session operations. The forced-close path (rank removed from map) correctly takes a reference on s via ceph_get_mds_session() before releasing mdsc->mutex, but three other paths do not: Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex) Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s) Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex) Without the extra reference, another thread can acquire mdsc->mutex during the unlock window, call __unregister_session() which drops the last reference on s, and free it. The original thread then accesses freed memory via s->s_mutex. Fix by adding ceph_get_mds_session(s) before each mutex_unlock and ceph_put_mds_session(s) after the corresponding mutex_lock, matching the pattern already used in the forced-close path. Race timeline (Path A): Thread A (check_new_map) Thread B (another map update holds mdsc->mutex or session teardown) -------------------------- -------------------------- s = mdsc->sessions[i] (refcount == 1, held only by sessions[] array) mutex_unlock(&mdsc->mutex) ---> acquires mdsc->mutex __unregister_session(mdsc, s) sessions[i] = NULL ceph_put_mds_session(s) refcount: 1 -> 0 kfree(s) <--- freed! mutex_lock(&s->s_mutex) UAF on freed s->s_mutex | ||||
| CVE-2026-89648 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: cap delegated inode count in ceph_parse_deleg_inos() ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers from an MDS create-with-delegation reply. For each set it reads a 64-bit start and a 64-bit len with ceph_decode_64_safe(), which only validates that the eight bytes are present in the message, not the value, and then loops over len while inserting entries into s_delegated_inos. len is fully attacker controlled. A malicious or compromised MDS can send one huge interval, many intervals in one reply, duplicate intervals, or repeated replies that accumulate delegated inodes on the same session. The original code bounded none of these and could spin the insert loop or grow the xarray without limit. Bound both dimensions with a single enforcement point. Track the number of delegated inodes held by each MDS session in an atomic counter and grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless() to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper is the only place the counter grows, the per-session population can never exceed the cap, so no separate per-session pre-check is needed. The counter is decremented when async create consumes a delegated inode or when an insert fails, incremented when a delegated inode is restored, initialized with the session xarray, and reset when reconnect destroys the xarray. A per-session cap alone still lets one reply spin the insert loop on duplicate ranges without growing the counter, so also cap the aggregate interval length accepted from a single reply. Together these bound both the loop trip count per reply and the xarray population across replies. The cap is a fixed, client-chosen constant rather than a value derived from the MDS. mds_client_prealloc_inos is a userspace MDS configuration option; it is never sent to the kernel client on the wire, and a server-supplied bound could not be trusted for a defensive limit in any case. The constant is set well above that option's documented default of 1000 (a generous multiple), so legitimate refill behavior is unaffected while the CPU and xarray memory a malformed delegation stream can consume stays bounded. Impact: a malicious or compromised Ceph MDS can no longer make a client spin through an unbounded delegated-inode interval or grow one session's delegated-inode xarray without limit. | ||||
| CVE-2026-89647 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its `nr_to_scan` budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (`count==0`) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns `-EAGAIN`, only to be queued again immediately. The dir-lease walk made this worse. When `expire_dir_lease` is `false` (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH` moves the dentry to the tail of the list and resets `di->time` via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN` requeue. Fix this in three steps: - Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is `false`. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via `STOP` at the first fresh lease). - Only return `-EAGAIN` from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (`count==0`). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (`count>0`) the reclaim path is unchanged and still retries via `-EAGAIN`. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in `/proc/lock_stat` (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated--- | ||||
| CVE-2026-89645 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: drop recovered reloc root refs on recovery failure During relocation recovery, each fs root gets a reference to its relocation root. If loading or adding a later root fails, or if the first transaction commit fails, btrfs_recover_relocation() jumps to out_unset before merge_reloc_roots() and clean_dirty_subvols(). put_reloc_control() drops the list-owned relocation root references, but it does not clear fs_root->reloc_root or drop the references owned by those pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an error such as -ENOMEM while processing a later root can leave references behind. Keep temporary references to the fs roots associated during recovery. On failure, clear their reloc_root pointers and drop the corresponding references. Once the first transaction commit succeeds, drop only the temporary fs root references and let the normal merge and cleanup paths handle the relocation roots. Fault injection on a pending-relocation image confirmed the cleanup gap. With an injected first-commit failure, 25 fs roots had reloc_root set with fs_error=0. With this fix, the same failure path drops that count to 0 before mount fails. | ||||
| CVE-2026-89644 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map leak in NOCOW direct I/O write btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an extent map reference that must be dropped on all exit paths. For direct writes into a NOCOW range, btrfs_get_blocks_direct_write() keeps using that extent map and asks btrfs_create_dio_extent() to allocate the ordered extent. If that fails, for example because btrfs_alloc_ordered_extent() fails, the function returns the error without dropping the input extent map. The PREALLOC path avoided this by dropping the input extent map before replacing it with the newly created one. Check the error from btrfs_create_dio_extent() before replacing the map and drop the input extent map on failure. | ||||
| CVE-2026-89642 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() calls truncate_pagecache() but skips pagecache_isize_extended() on extension. truncate_setsize() shows the correct pattern: i_size_write(inode, newsize); if (newsize > oldsize) pagecache_isize_extended(inode, oldsize, newsize); truncate_pagecache(inode, newsize); pagecache_isize_extended() zeroes the tail of the page straddling old EOF. Without it, dirty bytes in that region can be written back to the server, exposing stale data in the newly extended range. | ||||
| CVE-2026-89638 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions When a file has the setuid or setgid bit set and is written to, the VFS strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID together with an ATTR_MODE carrying the already-cleared mode. Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped ATTR_MODE in that case: /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; This is fine for the default mount, where the mode is only emulated via the DOS read-only attribute and cannot represent the setuid/setgid bits anyway. However, with the "cifsacl" or "modefromsid" mount options the mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with the SMB3.1.1 POSIX extensions the mode is sent to the server directly, and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means the cleared mode is never pushed to the server, so the setuid/setgid bit survives the write. This is a security issue: on local filesystems the setuid bit is stripped when a file is written, but over these cifs.ko mounts the bit persists on the server, potentially allowing an unexpected privilege escalation on subsequent execution. Fix this in two places: 1. cifs_setattr_nounix(): only take the "skip mode change" shortcut when the mode is emulated via the DOS read-only attribute (i.e. neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are in effect), so that the cleared mode is propagated to the server in the ACL / POSIX cases. 2. cifs_setattr_unix(): this function is only called when Unix extensions are in effect, so the mode is always stored on the server. Remove the shortcut entirely so that the cleared mode is always pushed. | ||||
| CVE-2026-89633 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89631 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject a tree connect response whose byte count is too small CIFSTCon() bounds its strnlen() over the byte area with the server's ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int and converts to a huge size_t. The later subtraction wraps the __u16 bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the slab object, and the bytes reach userspace through tcon->nativeFileSystem in /proc/fs/cifs/DebugData. Reject a byte area too small for what the parser consumes. Two bytes is the least it can consume, and no conformant response carries fewer. The new trace point is the 129th smb_eio_trace entry, which __mode(byte) cannot represent, so the attribute goes with it. | ||||
| CVE-2026-89625 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer: ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB completion ghl_magic_poke_cb() re-arms the timer with mod_timer(). sony_remove() drained the timer with timer_delete_sync() and then freed the URB with usb_free_urb(): timer_delete_sync(&sc->ghl_poke_timer); usb_free_urb(sc->ghl_urb); timer_delete_sync() does not block re-arming, and while the URB is in flight the timer is not pending, so the sync delete is a no-op. A URB completion that runs after the delete re-arms the timer, and usb_free_urb() only drops a reference -- it does not kill an in-flight URB. sc is allocated with devm_kzalloc() and freed once sony_remove() returns, so the re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a use-after-free from timer softirq. This is a disconnect/rmmod race. Poison the URB first, then shut the timer down, before freeing the URB. usb_poison_urb() kills any in-flight URB and permanently rejects further submissions, so a poke timer that is still pending cannot re-submit the URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs. usb_kill_urb() would not suffice: it only cancels the in-flight URB and leaves it submittable once it returns, so the pending timer could re-submit it and put a fresh URB in flight over the freed sc. timer_shutdown_sync() then drains any last callback and blocks re-arming. The probe error path is unaffected: it is only reached before the timer is armed. Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds and arms the poke timer, the poke URB is held in flight, the driver is unbound (freeing sc), then the URB is released. The completion re-arms the timer on the freed sc, and the re-armed timer fires ~8 s later: BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0 Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0 ghl_magic_poke+0x98/0xb0 call_timer_fn+0x35/0x2b0 __run_timers+0x69c/0x9a0 run_timer_softirq+0x173/0x2a0 Allocated by task 169: sony_probe Freed by task 338: devres_release_group <- hid_device_remove (sony_remove) Found by 0sec (https://0sec.ai) using automated source analysis. | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89622 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in mcp->rxbuf for the duration of a transfer but never clears it when the transfer finishes or times out. Once the caller frees or reuses the buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to memcpy device data into the freed memory, causing a write use-after-free. Route all return paths through a single exit point that clears mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard in the raw_event handler can reject any report arriving after the transfer has ended. | ||||
| CVE-2026-89601 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had a construct like: if (IS_SYNC(inode)) { sync_inode_metadata(inode, 1); } else { mark_inode_dirty(inode); } which leads to lost inode updates for IS_SYNC inodes because sync_inode_metadata() does anything only if the inode is already dirty and hence inode updates may be simply lost. Fix the problem by unconditionally marking the inode dirty and *then* call sync_inode_metadata(). | ||||
| CVE-2026-89580 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and releases its recursion slot via put_callchain_entry() before returning, so nothing keeps the entry reserved while __bpf_get_stack() consumes it below. A preemptible BPF program (e.g. a non-sleepable raw tracepoint program on a PREEMPT kernel, which runs under migrate_disable() but not preempt_disable()) can be scheduled out between obtaining the entry and the copy. Another task scheduled on the same CPU then reuses the same per-CPU buffer and overwrites trace->nr with a larger value. copy_len is then computed from the inflated trace->nr and can exceed the caller's buffer, causing an out-of-bounds write in the memcpy() and in the build_id path. The rcu_read_lock() taken here alone does not prevent this. It is only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does not disable preemption; it merely keeps perf's callchain buffer array alive (freed via call_rcu()) and does nothing to stop another task from reusing the entry. Disable preemption around obtaining the callchain entry and copying it into the caller's buffer, so the entry cannot be reused underneath us and trace->nr stays bounded by max_depth. Build ID resolution may fault and is therefore deferred until after preemption is re-enabled; by then the instruction pointers have already been copied into buf, so it operates only on that private copy. Note, preempt_disable() also subsumes the buffer-lifetime guarantee the rcu_read_lock() provided, since a preempt-disabled section is an RCU read-side critical section for the callchain buffers' call_rcu() reclaim. [ changed Fixes: commit ] | ||||
| CVE-2026-89574 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm array: validate array block headers on read array_block_check() validates blocknr and csum and nothing else, while node_check(), next to it, has bounded the structural fields since both were written. dm_array_cursor_next() takes its loop bound from the on-disk nr_entries and element_at() is unguarded pointer arithmetic, so a count larger than the block holds keeps the cursor in one block while the index grows past it and the read walks off the dm-bufio buffer -- dm_cache_load_mappings() drives it once per cache block at activation. Check the header against itself: reject a zero value_size, require max_entries to equal calc_max_entries() for that value_size and block size, and require nr_entries to fit. Equality rather than an upper bound, since a count below the real capacity trips BUG_ON() in fill_ablock() and trim_ablock(). Metadata dm-array writes satisfies all three. | ||||
| CVE-2026-89572 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: apple-soc: Fix OPP table cleanup apple_soc_cpufreq_init() adds OPP tables from firmware, but some failure paths do not remove them. The driver also uses dev_pm_opp_remove_all_dynamic(), which is not the right cleanup helper for OPP tables loaded from firmware. Use the cpumask OPP helper after the policy CPU mask has been populated. Pair it with the matching cpumask remove helper on failure paths and in apple_soc_cpufreq_exit(). This also removes the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask helper loads the DT OPP tables for all CPUs in the policy. | ||||