Export limit exceeded: 402609 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 402609 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402609 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98304 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops every rule off the list, and bcmgenet_open() calls it on each ifup. Every rule the user configured is silently lost: # ethtool -N eth0 flow-type ether dst $MAC action 0 Added rule with ID 0 # ethtool -n eth0 | grep -c Filter: 1 # ip link set eth0 down && ip link set eth0 up # ethtool -n eth0 | grep -c Filter: 0 Initialise the lists once at probe and restore the rules on open, as bcmgenet_resume() already does. | ||||
| CVE-2026-98309 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides no matching drm_kms_helper_poll_fini(). The output poll work stays scheduled after unbind and runs on the freed drm_device: # modprobe vc4; rmmod vc4; sleep 10 BUG: KASAN: slab-use-after-free in delayed_work_timer_fn BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm] Workqueue: events output_poll_execute [drm_kms_helper] Allocated by task 171: __devm_drm_dev_alloc Freed by task 262 (rmmod): drm_dev_put / component_del Use drmm_kms_helper_poll_init() so polling is finalized with the device, as other drivers do. | ||||
| CVE-2026-98311 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: don't transfer operstate before register virt_wifi_newlink() calls netif_stacked_transfer_operstate() before register_netdevice(). If the lower device is dormant, that queues the new netdev on lweventlist while it is still uninitialized. If registration fails after that, for example because of an invalid name such as "bad/name", free_netdev() immediately frees the object. A later linkwatch_fire_event() then use-after-frees the list entry. Move the transfer to after netdev_upper_dev_link(), as macvlan and ipvlan already do. | ||||
| CVE-2026-98312 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as (actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where actual_length is the unsigned length the device reported for the matching IN packet. A packet completed with status 0 and actual_length < 4 wraps the subtraction to 0x7fffffec; a zero-length isochronous packet is legal on the bus, and the preceding loop rejects only non-zero status. The sum reaches memset() on out_urb->buffer, a 4832-byte object from kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB). Even without the wrap the result is out of bounds: at 88.2/96 kHz the 4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight packets span 5024 bytes of that buffer. usb_submit_urb() rejects an over-long descriptor only after the memset() and the usb6fire_pcm_playback() copy of user PCM data have run. Guard the subtraction as the sibling usb6fire_pcm_capture() already does, and limit the frame count to what fits in rt->out_packet_size, the OUT endpoint's wMaxPacketSize. This bounds total_length by the buffer size while keeping each packet length aligned to a whole output frame. BUG: KASAN: out-of-bounds in usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) Write of size 18446744073709551456 at addr ffff88802a3d0000 by task vhci_rx/5018 Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) __asan_memset (mm/kasan/shadow.c:84) usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107 drivers/usb/usbip/vhci_rx.c:242) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 10: __kmalloc_cache_noprof (mm/slub.c:5563) usb6fire_pcm_init (sound/usb/6fire/pcm.c:560 sound/usb/6fire/pcm.c:595) usb6fire_chip_probe (sound/usb/6fire/chip.c:133) usb_probe_interface (drivers/usb/core/driver.c:399) The buggy address belongs to the object at ffff88802a3d0000 which belongs to the cache kmalloc-8k of size 8192 The buggy address is located 0 bytes inside of 4832-byte region [ffff88802a3d0000, ffff88802a3d12e0) Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-98313 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() returns early when link training fails, leaving ->power_on false and the main link down. msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE and waits for an idle-pattern completion that cannot arrive, so every failed enable is followed by "PUSH_IDLE pattern timedout". Every other step of the teardown is already gated on that flag: msm_dp_display_disable(), called from .atomic_post_disable(), returns early on !power_on. The PUSH_IDLE write is the only one that is not, so the controller's runtime-PM reference is then dropped without the link having been taken down. On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC does not survive it: TrustZone force-stops the SOCCP and ADSP remote processors and the machine resets silently about 50 ms later, with no oops and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not currently train, this reproduces without any compositor or GPU involvement: # eDP enable has already failed with "Failed link training (rc=-104)" echo 1 > /sys/class/graphics/fb0/blank [535.645455] === marker === [535.694833] qcom_q6v5_pas d00000.remoteproc: fatal error received: \ sys_m_smsm.c:512:TZ force stop [535.694875] remoteproc remoteproc0: crash detected in soccp: type fatal error [535.728857] qcom_q6v5_pas 6800000.remoteproc: fatal error received: \ sys_m_smsm.c:783:err fatal notification received from TZ <SoC reset> Gate the PUSH_IDLE write on ->power_on so the disable path is consistent with the rest of the teardown. With this applied the same sequence is harmless and the machine stays up; without it, it resets every time. The unconditional write dates back to the original DP driver (c943b4948b58 ("drm/msm/dp: add displayPort driver support")), but the surrounding code has been restructured several times since, so no Fixes: tag is offered. Note that the eDP link-training failure that exposes this on the A16 is a separate problem in the glymur eDP PHY and is reported separately; this change is about not damaging the machine when training fails, for whatever reason. Tested on ASUS Zenbook A16 (UX3607OA), Snapdragon X2 Elite Extreme, on linux-next next-20260803 and next-20260807. The machine has since been running next-20260807 with this patch as its daily driver. Patchwork: https://patchwork.freedesktop.org/patch/745167/ | ||||
| CVE-2026-98314 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() calls snd_device_register() to link the new struct snd_timer into the global timer list while it still carries hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop), and only afterwards sets timer->private_data = substream. Once the timer is on the list under register_mutex, a concurrent reader can already reach it through the same mutex and invoke these callbacks. /proc/asound/timers does this via c_resolution(), and snd_timer_open()+snd_timer_start() reach start()/stop() the same way. All three dereference timer->private_data, which for this brief window is NULL, giving a NULL-pointer dereference: substream = timer->private_data; return substream->runtime ? ... // substream is NULL Move the private_data/private_free assignment before snd_device_register() so the timer is never visible on the list without its private_data set. On the snd_device_register() failure path, private_free() (snd_pcm_timer_free()) can now run, but it only does substream->timer = NULL, which is already NULL at that point since substream->timer is set to the new timer just once, after a successful registration -- so the failure path stays safe. | ||||
| CVE-2026-98355 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: guard against null kobj name In the client, if `init_path()` errors, the callee tries to clean up with `rtrs_clt_close_conns()`. However, this can lead to calling the event tracing code with `clt_path->kobj->name` being `NULL` and thus causing a null pointer dereference when trying to copy from it. This just adds a guard to check that the name is not `NULL` before copying from it. The server appears to have a similar pattern. | ||||
| CVE-2026-98356 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: check create_singlethread_workqueue() in DCB setup bnxt_re_init_dcb_wq() ignores a failed allocation. The async DCB handler later calls queue_work() on the NULL pointer. | ||||
| CVE-2026-106110 | 2026-10-06 | 7.5 High | ||
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-4948 | 2 Firewalld, Redhat | 7 Firewalld, Enterprise Linux, Enterprise Linux Eus and 4 more | 2026-10-06 | 5.5 Medium |
| A flaw was found in firewalld. A local unprivileged user can exploit this vulnerability by mis-authorizing two runtime D-Bus (Desktop Bus) setters, setZoneSettings2 and setPolicySettings. This mis-authorization allows the user to modify the runtime firewall state without proper authentication, leading to unauthorized changes in network security configurations. | ||||
| CVE-2026-86134 | 1 Watchguard | 2 Fireware, Fireware Os | 2026-10-06 | 7.5 High |
| A NULL pointer dereference vulnerability in the WatchGuard Fireware OS authentication process allows a remote, unauthenticated attacker to crash the management daemon by sending a specially request to the login interface, resulting in a denial of service. | ||||
| CVE-2026-98317 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS. NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses .validation_type, so no validation is applied: # ynl --family rt-neigh --do setneightbl \ --json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}' # ynl --family rt-neigh --dump getneightbl --output-json | \ jq '.[] | select(.name == "arp_cache" and has("config")) | .parms["interval-probe-time-ms"]' 0 Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is silently cast to u32, so a larger value can bypass the min check: e.g. 4294967296 == 0x100000000 # ynl --family rt-neigh --do setneightbl \ --json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}' # ynl --family rt-neigh --dump getneightbl --output-json | \ jq '.[] | select(.name == "arp_cache" and has("config")) | .parms["interval-probe-time-ms"]' 0 msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR() when HZ > 1000 (Alpha, MIPS), and passing a negative integer to queue_delayed_work(unsigned long delay) causes sign extension, which wraps around the expiry time to the past, resulting in it being handled as 0 delay in the timer wheel. Let's use NLA_POLICY_FULL_RANGE() and limit the max to 1 day. The same max check is applied to sysctl as well. Note that this controls the probe interval for NTF_MANAGED entries, so the max of 1 day is unlikely to break any deployments. | ||||
| CVE-2026-98320 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: hold reference on ct until flow is released nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe semantics also allow to refer to the wrong conntrack from the flowtable datapath. Hold reference on ct until flow is released after rcu grace period. Add rcu_barrier() on module exit path, to ensure pending flow entries are release before module goes away. | ||||
| CVE-2026-98326 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: release the channel if start fails ieee80211_join_mesh() acquires a channel context and then calls ieee80211_start_mesh(), which can fail. In that case, the chanctx isn't released then interface removal will attempt to unassign it after it's removed from the driver, hitting: wlan0: Failed check-sdata-in-driver check, flags: 0x0 WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx ieee80211_assign_link_chanctx __ieee80211_link_release_channel ieee80211_link_release_channel ieee80211_teardown_sdata unregister_netdevice_many_notify _cfg80211_unregister_wdev ieee80211_remove_interfaces ieee80211_unregister_hw mac80211_hwsim_del_radio hwsim_exit_net Correctly release the channel on start failures. | ||||
| CVE-2026-98346 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't get the radio mask for netdev-less wdevs cfg80211_calculate_bi_data() calls rdev_get_radio_mask() with wdev->netdev, which can be NULL and then crashes in mac80211. To avoid that, invert the order of checks since wdev->netdev is always valid for beaconing interfaces. | ||||
| CVE-2024-10306 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2026-10-06 | 5.4 Medium |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. | ||||
| CVE-2026-2575 | 2 Keycloak, Redhat | 5 Keycloak, Build Keycloak, Build Of Keycloak and 2 more | 2026-10-06 | 5.3 Medium |
| A flaw was found in Keycloak. An unauthenticated remote attacker can trigger an application level Denial of Service (DoS) by sending a highly compressed SAMLRequest through the SAML Redirect Binding. The server fails to enforce size limits during DEFLATE decompression, leading to an OutOfMemoryError (OOM) and subsequent process termination. This vulnerability allows an attacker to disrupt the availability of the service. | ||||
| CVE-2025-45871 | 2026-10-06 | N/A | ||
| LogicalDOC Enterprise up to and for 9.1.1 is vulnerable to blind SQL injection in the WorkflowsDataServlet component, allowing authenticated user to manipulate SQL queries via crafted workflow template name. | ||||
| CVE-2026-87830 | 1 Apache | 1 Wss4j | 2026-10-06 | 9.1 Critical |
| In the StAX streaming WS-SecurityPolicy validator, certain relative or unsupported XPath expressions can be converted into paths that never match the actual XML element path. A remote SOAP peer may therefore send a required element without the expected signature or encryption. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue. | ||||
| CVE-2026-106107 | 2026-10-06 | N/A | ||
| Quasar Framework is a framework for building high-performance Vue.js user interfaces. Prior to 3.3.0, several @quasar/app-vite SSR and SSG rendering paths interpolated ssrContext.nonce directly into quoted HTML attributes. An application that derives or overrides this value with attacker-controlled data can allow a quote to terminate the nonce attribute and inject additional attributes or markup into generated HTML across development and production SSR or SSG output. Cryptographically generated base64 or base64url nonces are not affected because they lack HTML attribute delimiters. This issue is fixed in version 3.3.0. | ||||