Export limit exceeded: 378312 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378312 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72106 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)". | ||||
| CVE-2026-72107 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number. | ||||
| CVE-2026-72109 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sparx5: unregister blocking notifier on init failure sparx5_register_notifier_blocks() registers the switchdev blocking notifier before allocating the ordered workqueue. If the workqueue allocation fails, the error path unregisters the switchdev and netdevice notifiers, but leaves the blocking notifier registered. Add a separate error label for the workqueue allocation failure path and unregister the switchdev blocking notifier there. | ||||
| CVE-2026-72113 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. | ||||
| CVE-2026-72115 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields shared by the op. Add op->if_detected to track the first interface that delivers a matching frame while a timeout/throttle timer is configured, and reject frames from any other interface for that op. The claim is decided in bcm_rx_handler() before hrtimer_cancel() touches op->timer, so a rejected frame can never disturb the claimed interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME, independent of kt_ival1/kt_ival2, since those may briefly hold a stale value from an earlier non-RTR configuration. The claim is released in bcm_notify() on NETDEV_UNREGISTER and in bcm_rx_setup() when SETTIMER reconfigures the timer values. A (re-)claim is only possible on CAN devices in NETREG_REGISTERED dev->reg_state to cover the release in bcm_notify() where reg_state becomes NETREG_UNREGISTERING until synchronize_net(). | ||||
| CVE-2026-72116 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. | ||||
| CVE-2026-72120 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). | ||||
| CVE-2026-72168 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix fault in unaligned fixup Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs, instead of kmalloc_obj() / kmalloc_objs() to prevent access to uninitialized data. Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at mtd_get_fact_prot_info. | ||||
| CVE-2026-72178 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: always put unsuccessfully committed target pids damon_commit_target() puts and gets the destination and the source target pids. It puts the destination target pid because it will be overwritten by the source target pid. It gets the source pid because the caller is supposed to eventually put the pids. In more detail, the caller will call damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source context. And in this case, [f]vaddr operation set's cleanup_target() callback will put the pids. The commit operation is made at the context level. The operation can fail in multiple places including in the middle and after the targets commit operations. For any such failures, immediately the error is returned to the damon_commit_ctx() caller. If some or all of the source target pids were committed to the destination during the unsuccessful context commit attempt, those pids should be put twice. The source context will do the put operations using the above explained routine. However, let's suppose the destination context was not originally using [f]vaddr operation set and the commit failed before the ops of the source context is committed. The destination does not have the cleanup_target() ops callback, so it cannot put the pids via the damon_destroy_ctx(). As a result, the pids are leaked. The issue in the real world would be not very common. The commit feature is for changing parameters of running DAMON context while inheriting internal status like the monitoring results. The monitoring results of a physical address range ain't have things that are beneficial to be inherited to a virtual address ranges monitoring. So the problem-causing DAMON control would be not very common in the real world. That said, it is a supported feature. And damon_commit_target() failure due to memory allocation is relatively realistic [1] if there are a huge number of target regions. Fix by putting the pids in the commit operation in case of the failures. The issue was discovered [2] by Sashiko. | ||||
| CVE-2026-72208 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: add bounds check before accessing EA entries in ntfs_ea_lookup and ntfs_listxattr, this verifies that there is enough space in the EA entry before accessing the next_entry_offset field of the EA entry. | ||||
| CVE-2026-72209 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate attribute values on lookup ntfs_attr_find() and ntfs_external_attr_find() check that generic resident attribute values fit in their attribute records and that fixed-size resident values are large enough. For variable-length resident formats, however, the fixed part is not enough: embedded length fields can still point callers past the resident value. A crafted image can set a small resident $FILE_NAME value_length while leaving file_name_length large. Callers then trust file_name_length and read past the resident value when converting or comparing the name. This was reproduced with a crafted image under KASAN as a slab-out-of-bounds read from the kmalloc-1k MFT record copy. The stack included ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(), ntfs_ucstonls(), and utf16s_to_utf8s(). Add a shared attribute value validator and use it before a lookup path can return an attribute, including the AT_UNUSED enumeration case where callers inspect returned attributes directly. The helper validates resident value bounds, minimum resident value sizes, variable-length $FILE_NAME fields, and non-resident mapping-pairs metadata that was previously checked separately in both lookup paths. This also preserves the intended resident @val matching semantics in the external attribute lookup path. The old duplicated validation block overwrote the actual resident value length with the type-specific minimum length before comparing @val, so variable-length resident values could fail to match even when the bytes were identical. Keep the comparison on the actual value length, and make ntfs_attrlist_entry_add() compare resident attributes with lowest_vcn zero instead of reading the non-resident union member after a successful resident match. Reject non-resident $FILE_NAME records too: the format requires $FILE_NAME to be resident and callers treat returned records as resident. | ||||
| CVE-2026-72218 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file->f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file. | ||||
| CVE-2026-72224 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arenas on btt_init() error paths The arenas allocated by discover_arenas() or create_arenas() are not freed on some error paths in btt_init(). This leaks memory when BTT initialization fails. Call free_arenas() from the affected error paths to release the allocations. [ as: commit message and log edits ] | ||||
| CVE-2026-72239 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN" Revert 99cf1fb58e68 ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"). Section 8.8 of the SNP spec says: Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure that no CPUs contain dirty cache lines for the memory containing the RMP. Cachelines can be moved from cache to cache in a dirty state. The wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but if the IPIs for WBINVD race with this dirty cacheline movement, it is possible that they may not get flushed, violating the firmware requirement. Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP table is not yet in use. [ Heroically bisected by Srikanth. ] [ bp: Massage commit message. ] | ||||
| CVE-2026-72269 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: fix potential memory leak in uvesafb_probe() Due to an incorrect goto label, memory allocated for modedb and modelist in uvesafb_vbe_init() is not freed in some error paths. Fix this by updating the goto label. | ||||
| CVE-2026-72125 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leaving a stale CAN filter that keeps pointing at the freed socket. Fix this the same way raw.c already does: hold a tracked reference to the bound net_device in the socket (so->dev/so->dev_tracker) from bind() onward instead of re-resolving it from the ifindex, and serialize bind()/release() with rtnl_lock() so that so->dev is always consistent with what the NETDEV_UNREGISTER notifier sees. so->dev stays valid regardless of ifindex-hash unlisting, and is only ever cleared by whichever of isotp_release()/isotp_notify() gets there first, so the filter is always removed exactly once. isotp_bind() now rejects a (re)bind with -EAGAIN while so->[tx|rx].state isn't ISOTP_IDLE yet, so a timer left running by a prior NETDEV_UNREGISTER can't act on a newly bound so->ifindex. Both checks share the same lock_sock() section, so there is no window in which a concurrent isotp_notify() clearing so->bound could be missed. | ||||
| CVE-2026-72126 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path. | ||||
| CVE-2026-72129 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). | ||||
| CVE-2026-72133 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. | ||||
| CVE-2026-72191 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: validate split-point offset in indx_insert_into_buffer indx_insert_into_buffer() computes used = used1 - to_copy - sp_size; memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off)); where sp and sp_size come from hdr_find_split(). hdr_find_split() walks entries by le16_to_cpu(e->size) without validating that each step stays within hdr->used or that the size field is at least sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper, only validates header-level fields (used, total, de_off) and does not walk per-entry sizes. A crafted NTFS image whose leaf INDEX_HDR reports used == total but contains one interior NTFS_DE with size = 0xFFF0 therefore passes validation, descends to indx_insert_into_buffer() through the ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split() return an sp whose sp_size (0xFFF0) greatly exceeds the remaining bytes in the buffer. The u32 subtraction underflows and the memmove count becomes a near-4-GiB value, producing an out-of-bounds kernel write that corrupts adjacent allocations and panics the kernel. Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a single 'touch' inside the mounted directory; crash site resolves to fs/ntfs3/index.c at the memmove. Trigger requires only local mount of an attacker-supplied filesystem image (USB, loopback, or removable media auto-mount). Reject the split whenever the chosen sp plus its declared size already extends past hdr1->used. This is the minimal fix; it preserves the existing hdr_find_split() contract and relies on the same out: cleanup path as the pre-existing error returns. A prior OOB read in the very same indx_insert_into_buffer() memmove was fixed in commit b8c44949044e ("fs/ntfs3: Fix OOB read in indx_insert_into_buffer") by tightening hdr_find_e(), but that fix does not cover the split-point size field path addressed here: sp is returned by hdr_find_split(), not hdr_find_e(), and the underflow is driven by sp->size rather than hdr->used exceeding hdr->total. | ||||