Export limit exceeded: 14810 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14810 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89333 | 2 Themeum, Wordpress | 2 Tutor Lms – Elearning And Online Course Solution, Wordpress | 2026-09-19 | 6.5 Medium |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.0.8 via the 'student_id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to disclose the email address and Tutor profile phone number of arbitrary WordPress users, including Administrators, by iterating over user IDs via the student_id parameter. | ||||
| CVE-2026-93127 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Drop scalar id on sign-extending narrowing stack fills When a spilled scalar is filled back with a sign-extending narrowing load (BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register including its scalar id, but coerce_reg_to_size_sx() then sign-extends the filled register's value. If the same slot is also filled with a plain zero-extending load (BPF_MEM), both destination registers share the id yet hold different values. A later 'if <zext-reg> == const' then refines the sign-extended register through sync_linked_regs() to a value it does not have at runtime (e.g. the verifier believes 0x80000000 while the register is 0xffffffff80000000), which can be turned into an out-of-bounds access. Drop the shared scalar id at the sign-extension site in check_mem_access() when sign extension actually changes the value, mirroring the BPF_MOVSX handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). | ||||
| CVE-2026-93606 | 2 Patriksimek, Vm2 Project | 2 Vm2, Vm2 | 2026-09-19 | 10 Critical |
| vm2 (npm) versions 3.12.0 and earlier contain a sandbox escape in `VM` and `NodeVM`. When an embedder exposes a host API that returns a host-realm Promise, the bridge's rejection sanitizer (hostPromiseSanitizeReject / makeSanitizedPromiseCallback / normalizeHostPromiseCallbacks in lib/bridge.js) only wraps `then`/`catch` rejection slots that hold a function, and the sandbox-side `Symbol.species`/`.then` neutralization is installed only on the sandbox intrinsic `Promise.prototype`, so it never applies to a host Promise. Code running inside the sandbox can overwrite `p.constructor[Symbol.species]` on the host Promise and then call `p.then()` with no `onRejected` handler; V8 substitutes its internal Thrower, which re-throws the raw host rejection value into a resolve/reject closure captured by the attacker. This delivers an unsanitized, fully functional bridge proxy of the host object to sandboxed code, bypassing handleException and hostPromiseSanitizeReject. If the rejection value is host-pivotable (for example a host `process` object), this results in arbitrary code execution on the host. Fixed in 3.12.1. | ||||
| CVE-2026-86736 | 1 Snipeitapp | 1 Snipe-it | 2026-09-19 | 4.3 Medium |
| snipe-it before 8.7.0 contains an incorrect calculation vulnerability in checkout request handling that allows authenticated users to corrupt the assets.requests_counter through duplicate submissions and cancellations without active requests. Attackers can repeatedly call cancel endpoints without active requests to drive the counter negative, or submit duplicate checkout requests to inflate the counter, misrepresenting pending demand in the admin queue. | ||||
| CVE-2026-18441 | 2 Latepoint, Wordpress | 2 Appointment Booking Plugin – Latepoint | Calendar & Scheduling For Wordpress, Wordpress | 2026-09-19 | 4.3 Medium |
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.6.9 via the set_customer_object due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to enumerate arbitrary customer records and disclose personally identifiable information - including first name, last name, email address, and phone number - by iterating the customer[id] parameter. This issue is exploitable only when the site is configured with customer authentication disabled (guest checkout enabled). | ||||
| CVE-2026-11537 | 1 Ibm | 1 Websphere Application Server | 2026-09-19 | 4.3 Medium |
| IBM WebSphere Application Server 9.0, and 8.5 could allow a remote attacker to obtain sensitive information about the file system through the FileTransfer servlet. | ||||
| CVE-2026-90305 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard IRQ context. On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping sighand->siglock: BUG: sleeping function called from invalid context at spinlock_rt.c:48 rt_spin_lock from lock_task_sighand lock_task_sighand from run_posix_cpu_timers run_posix_cpu_timers from update_process_times ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M. ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support"), so the select need not be conditional on KVM. Select it to defer POSIX CPU timer expiry to task context. Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers created with timer_create(). | ||||
| CVE-2026-90273 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf enable path, there are missing cases where cscfg_csdev_disable_active_config() is not called: - Branch broadcast is selected but not supported by the hardware - etm4_enable_hw() fails This can lead to a leak of config_desc->active_cnt. Fix this by properly calling cscfg_csdev_disable_active_config() in these error paths. | ||||
| CVE-2026-90368 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unwind state on add_interface failure When mt76_wcid_alloc() fails, mt7915_add_interface() returned without clearing the vif_mask/omac_mask bits it had already set, without removing the firmware dev info added earlier, and without clearing a monitor_vif pointer to the vif mac80211 is about to free. mac80211 does not call remove_interface() for a failed add, so the indices and firmware dev entry leaked permanently and testmode could dereference the stale monitor_vif. Add a proper error unwind. | ||||
| CVE-2026-92483 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: Remember FLB retrieve() status LUO keeps track of successful retrieve attempts on an FLB. It does so to avoid multiple retrievals of the same FLB. Multiple retrievals cause problems because once the FLB is retrieved, the serialized data structures are likely freed and the FLB is likely in a very different state from what the code expects. All this works well when retrieve succeeds. When it fails, luo_flb_retrieve_one() returns the error immediately, without ever storing anywhere that a retrieve was attempted or what its error code was. If the user attempts to retrieve another file registered with the same FLB, LUO will attempt to call the FLB's retrieve() callback again. The retry is problematic for much of the same reasons listed above. The FLB is likely in a very different state than what the retrieve logic normally expects (e.g. some KHO pages may have already been restored and freed). There is no sane way of attempting the retrieve again. Remember the error retrieve returned and directly return it on a retry. This is done by changing the retrieved bool to a retrieve_status integer. A value of 0 means retrieve was never attempted, a positive value means it succeeded, and a negative value means it failed and the error code is the value. This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember retrieve() status") which did the same for LUO files. | ||||
| CVE-2026-90324 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: check import_ubuf() return value import_ubuf() can fail if the address range (provided by the userspace ublk server) is outside the allowed user address space. Return that 0 bytes were copied if import_ubuf() fails rather than passing an uninitialized struct iov_iter to ublk_copy_user_pages(). | ||||
| CVE-2026-90385 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: create serial pool adding rdev to array with serialize_policy=1 The following bug has been observed with kernel 7.1.3 after adding a new rdev to an existing RAID1 array with serialize_policy enabled: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 19639 Comm: ext4lazyinit Not tainted 7.1.3-1-default RIP: _raw_spin_lock_irqsave+0x27/0x50 CR2: 0000000000004960 Call Trace: wait_for_serialization+0xb9/0x260 [raid1] raid1_make_request+0x762/0xaff [raid1] md_handle_request+0x1c9/0x2e0 [md_mod] The raid1.c code calls wait_for_serialization() if the MD_SERIALIZE_POLICY is set, and wait_for_serialization assumes that rdev->serial is initialized. Normally this will be the case for arrays that have the serialize_policy sysfs attribute set to 1. But when a new rdev is added to an existing array in bind_rdev_to_array(), the condition at mddev_create_serial_pool() causes creation of rdev->serial to be skipped. Fix it. | ||||
| CVE-2026-90412 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix return status of RMI log page on allocation failure nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS (set by the successful nvmet_req_find_ns() call) when the kzalloc() for the log buffer fails. It then jumps to the out label and completes the request with a success status, so the host is told the command succeeded while no data was transferred. Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler, so an allocation failure is reported as an internal error. | ||||
| CVE-2026-90406 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: handle runtime PM resume failure in core deinit Check the return value of pm_runtime_resume_and_get() in iris_core_deinit(). If runtime PM resume fails, skip hardware power-off operations but still perform software teardown and state transition. Also skip the corresponding pm_runtime_put_sync() call to avoid unbalanced runtime PM references. | ||||
| CVE-2026-93135 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject programs with inlined helpers if JIT is not available When an architecture (such as LoongArch, ARM64, and RISC-V) implements bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper call offset (insn->imm) in bpf_do_misc_fixups(). This is because the helper is expected to be inlined by the JIT compiler later. Therefore, insn->imm remains as the raw helper enum ID. However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or if JIT compilation fails dynamically (e.g., due to OOM), the program falls back to the BPF interpreter. When the interpreter executes (__bpf_call_base + insn->imm) with the unpatched raw ID, it jumps into an invalid address space, triggering an instruction alignment fault or a kernel panic. Although these helpers have valid C implementations in the kernel, the omission of offset rewriting makes runtime interpreter fallback fatal. Fix this by setting 'prog->jit_required = 1' when helper call rewriting is skipped for JIT inlining. This ensures that such programs are safely rejected if JIT is not available, preventing the runtime kernel panic. | ||||
| CVE-2026-93181 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix uncore_box ref/unref ordering In uncore_event_cpu_online(), uncore_box_ref() was called before uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0, but box->cpu is still -1 at that point because uncore_change_context() has not run yet. As a result, the box is never initialized on the first CPU to come online in a die, leaving it permanently uninitialized in the single-CPU-per-die case. Thus, box->refcnt is one count below the true value, and in the CPU offline path, the box will be torn down on the second-to-last CPU. In uncore_event_cpu_offline(), uncore_box_unref() was called after uncore_change_context(), so box->cpu is already -1 when the collector CPU goes offline, which prevents it from tearing down the box. Fix by swapping the call order in both paths so that uncore_box_{ref,unref}() runs at the point where box->cpu reflects the correct context. Move allocate_boxes() out of uncore_box_ref() to enable this reordering. | ||||
| CVE-2026-93138 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the bpf_verifier_lock, but publishes the result through a plain store and re-checks it through a plain lockless load. Nothing orders the stores initializing the struct btf inside btf_parse_vmlinux() against the store publishing the pointer: On a weakly ordered arch, a concurrent first-time caller taking the lockless fast path could in principle observe the pointer before the parsed contents are visible. The mutex_unlock() does not help such a reader given it only synchronizes with a later acquisition of the same lock. Thus, publish the pointer with smp_store_release() and read it on the fast path with smp_load_acquire(). Acquire semantics are needed rather than a dependency-ordered READ_ONCE(): btf_parse_vmlinux() also populates globals outside the returned object (e.g. bpf_ctx_convert.t). An address dependency would only order accesses performed through the pointer and not cover other globals. | ||||
| CVE-2026-93038 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: dac: ad5686: missing NULL check on match data Verify that chip_info pointer is not NULL. If a user binds the driver using driver_override via sysfs with a device name not present in the id_table or of_match_table, match data will be NULL. | ||||
| CVE-2026-93040 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize channel state checks pause() and resume() read and update channel state without holding vc.lock, while the interrupt handlers update the same state under it. Take the same lock around those state checks so that request, status, and configured stay consistent. For example, pause() can observe EDMA_ST_BUSY right before the interrupt handler completes the final descriptor and moves the channel to EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No further interrupt will acknowledge the request, and since issue_pending() requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all() leaves the stale request behind, so even reconfiguring the channel does not recover it. issue_pending() already runs under vc.lock, but it tests configured before taking it. Move that test under the lock as well, so configured, request, and status are evaluated as one channel-state snapshot. | ||||
| CVE-2026-93052 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: bcm-vk: Use acquire/release for msgq_inited bcm_vk_sync_msgq() fills the message queue information and then sets msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the message queues and their cached queue information. atomic_set()/atomic_read() do not order those accesses. A reader can see msgq_inited set while still seeing stale queue information. Use release when publishing the initialized queues and acquire when checking the gate. Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the gate and does not publish queue state to readers. | ||||