Export limit exceeded: 390746 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390746 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390746 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89600 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: fix use-after-free of file range info fsnotify_pre_content() builds its file_range on the triggering task's stack. fanotify_alloc_perm_event() saves a pointer to range.pos in the heap-allocated permission event so copy_range_info_to_user() can report the offset later. The event reader can set the event state to FAN_EVENT_REPORTED and then sleep while preparing the file descriptor. If a signal interrupts the triggering task at that point, fanotify_get_response() changes the state to FAN_EVENT_CANCELED and returns. This unwinds the file_range stack frame while the reader still owns the event. The reader then dereferences pevent->ppos and copies the stale stack value to userspace. KASAN reported: BUG: KASAN: use-after-free in fanotify_read+0x293e/0x2970 Read of size 8 at addr ffff88811434fc50 by task fanotify_inotif/95 Call Trace: fanotify_read+0x293e/0x2970 vfs_read+0x177/0xa20 ksys_read+0xf7/0x1c0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Store the range position directly in the permission event and use FANOTIFY_NO_RANGE when range information is unavailable. The event remains alive until the reader finishes, so the reported offset no longer depends on the triggering task's stack. | ||||
| CVE-2026-89599 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: panel-dsi-cm: initialize lock before registering display dsicm_probe() registers the display before initializing ddata->lock. Once omapdss_register_display() publishes the display, another consumer can reach a dsicm callback that takes this mutex while it is still uninitialized. Initialize the mutex before registering the display so the published callbacks always see a valid lock. | ||||
| CVE-2026-89598 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks may run from fbcon while printk has disabled preemption. They currently update the display synchronously, which enters the sleeping I2C transfer path from atomic context. A complete report from an RK3566 system follows: [ 258.129004] watchdog: watchdog0: watchdog did not stop! [ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003 [ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2 spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2 stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables x_tables autofs4 [ 258.129215] Preemption disabled at: [ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340 [ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C 6.6.0-rc5-rockchip-rk356x #4 [ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT) [ 258.129243] Call trace: [ 258.129245] dump_backtrace+0xa0/0x128 [ 258.129252] show_stack+0x20/0x38 [ 258.129256] dump_stack_lvl+0x60/0xb0 [ 258.129265] dump_stack+0x18/0x28 [ 258.129269] __schedule_bug+0xa0/0xc8 [ 258.129274] __schedule+0x9ac/0xd30 [ 258.129279] schedule+0x60/0x100 [ 258.129282] schedule_timeout+0x194/0x338 [ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498 [ 258.129296] rk3x_i2c_xfer+0x20/0x60 [ 258.129300] __i2c_transfer+0x194/0x648 [ 258.129308] i2c_transfer+0x9c/0x130 [ 258.129313] i2c_transfer_buffer_flags+0x64/0x98 [ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb] [ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb] [ 258.129343] soft_cursor+0x13c/0x210 [ 258.129350] bit_cursor+0x2dc/0x550 [ 258.129354] fbcon_cursor+0xec/0x108 [ 258.129359] hide_cursor+0x44/0xc8 [ 258.129365] vt_console_print+0x398/0x3b0 [ 258.129370] console_flush_all.isra.0+0x17c/0x410 [ 258.129377] console_unlock+0x4c/0x100 [ 258.129382] vprintk_emit+0x1c8/0x340 [ 258.129386] vprintk_default+0x40/0x58 [ 258.129389] vprintk+0xb8/0xd0 [ 258.129392] _printk+0x68/0x98 [ 258.129398] watchdog_release+0x170/0x230 [ 258.129404] __fput+0xbc/0x288 [ 258.129409] __fput_sync+0x58/0x70 [ 258.129413] __arm64_sys_close+0x40/0x90 [ 258.129419] invoke_syscall+0x4c/0x118 [ 258.129426] el0_svc_common.constprop.0+0x48/0xf0 [ 258.129432] do_el0_svc+0x24/0x38 [ 258.129437] el0_svc+0x48/0x100 [ 258.129443] el0t_64_sync_handler+0xc0/0xc8 [ 258.129448] el0t_64_sync+0x190/0x198 [ 258.573087] ------------[ cut here ]------------ [ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871 preempt_count_sub+0x9c/0x148 [ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp ---truncated--- | ||||
| CVE-2026-89597 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers the v86d connector callback before registering the platform driver. If platform_driver_register() fails, the function returns the error directly and leaves the connector callback registered. The later platform-device failure path already unregisters the callback. Add the same cleanup before the final return when platform-driver registration fails. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-89596 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix off-by-one when saving/restoring non-PCI config space nv_suspend() and nv_resume() walk the non-PCI configuration space with for (i = 0; i <= np->register_size/sizeof(u32); i++) which runs one iteration too many. saved_config_space is declared as u32 saved_config_space[NV_PCI_REGSZ_MAX/4]; and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3 device register_size/sizeof(u32) is exactly the array length and the last iteration addresses one element past the end. The element it lands on is np->name_rx[0..3]: saved_config_space[] is followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no padding. Nothing observable is corrupted by that, because nv_request_irq() rewrites name_rx with sprintf() before it is ever passed to request_irq(). The bug is the out-of-bounds access itself, which UBSAN reports and which CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code, plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one dword past the range the driver mapped: np->base = ioremap(addr, np->register_size); VER1 and VER2 devices stay inside the array, but they too get the stray read and the stray write one dword past their own window. Caught by UBSAN on an Apple Macmini3,1 (MCP79) during a deep S3 cycle. The splat below is trimmed: the build path in the file name, the CPU and taint lines, the Workqueue line, the "?" hint frames, and the frames below device_suspend are all cut. The kernel was tainted, with an out-of-tree nouveau and CPU_OUT_OF_SPEC; forcedeth itself was the stock module. UBSAN: array-index-out-of-bounds in drivers/net/ethernet/nvidia/forcedeth.c:6225:25 index 385 is out of range for type 'u32 [385]' Call Trace: dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x54/0x59 __this_module+0xe398c/0xe9010 [forcedeth] pci_pm_suspend+0x80/0x170 dpm_run_callback+0x51/0x160 device_suspend+0x1a2/0x4a0 ... Both loops are hit. UBSAN reports each source location only once per module load (__ubsan_handle_out_of_bounds() calls suppress_report(), which does test_and_set_bit(REPORTED_BIT, ...) on the struct source_location), so the two splats land in the first S3 cycle after the module is loaded and later cycles are silent even though the access still runs off the end every time. In that first cycle line 6225 is reported from pci_pm_suspend and line 6240 from pci_pm_resume. The same off-by-one was fixed in nv_get_regs() by commit ba9aa134287f ("forcedeth: fix buffer overflow") in 2012; these two loops were missed. The suspend and resume side was reported on LKML in September 2013 by Marc Weber, with the same analysis and the same one-character fix, but the patch was attached rather than sent inline and the thread ended there. Use < instead of <=, which saves and restores exactly register_size bytes. | ||||
| CVE-2026-89595 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix stale object mask after concurrent mark updates When a mark gets a new event bit, fanotify and inotify may avoid recalculating the object mask if the cached aggregate already contains that bit. This is racy with a recalculation triggered by a concurrent update to another mark on the same connector. The concurrent scan can read the mark before the new bit is added, while the updater reads the old aggregate before that scan publishes its result. The updater then skips recalculation and the scan publishes a mask without the bit, leaving the object mask stale after both updates complete. This can be reproduced with two fanotify groups watching the same inode: one thread removes FAN_MODIFY from one existing mark while another thread adds FAN_MODIFY to the other mark. After both fanotify_mark() calls return, writes can fail to produce FAN_MODIFY for the group whose mark now contains the bit. This was reproduced on an unmodified v6.12.95 kernel. The equivalent inotify interleaving loses IN_MODIFY events. For normal fanotify additions, recalculate whenever the raw mark mask changes. The normal mask is not cleared asynchronously, so an unchanged addition cannot introduce missing interest. Always recalculate ignore-mask updates because FS_MODIFY handling may clear the ignore mask without taking mark->lock, making snapshot comparisons unreliable. Always recalculate after updating an existing inotify watch. Its replace path temporarily sets mark->mask to zero, so a concurrent scan can observe zero even when the old and final masks are equal. Assigning the replacement mask directly would avoid the transient zero, but existing-watch updates are infrequent, so unconditional recalculation is simpler. | ||||
| CVE-2026-89593 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hugetlb: only adjust reservation during unmapping if mapcount is 0 Since df7a6d1f6405, __unmap_hugepage_range can adjust reservations. In the case of folio mapped in both a parent and a child, if the parent unmaps the range first, the reservation adjustment will result in an underflow of the reserved count. Once the child unmaps the range, the count is restored. Change __unmap_hugepage_range() to check the mapcount before adjusting the reservation. | ||||
| CVE-2026-89592 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix NULL dereference and integer overflow in rocket_job_push() rocket_job_push() allocates a temporary array to hold all input and output GEM object pointers: bos = kvmalloc_array(job->in_bo_count + job->out_bo_count, sizeof(void *), GFP_KERNEL); memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *)); memcpy(&bos[job->in_bo_count], job->out_bos, ...); Two bugs exist: 1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and the subsequent memcpy() dereferences it, causing a kernel NULL pointer dereference. 2. Integer overflow: in_bo_count and out_bo_count are both u32, set directly from userspace-supplied in_bo_handle_count and out_bo_handle_count with no prior validation. Their sum is computed in u32 arithmetic and can wrap to a smaller value, causing the allocation count passed to kvmalloc_array() to be smaller than intended. Subsequent uses still operate on the original counts when copying and locking objects, which may lead to out-of-bounds accesses on the temporary array. Fix by using check_add_overflow() to detect count overflow before the allocation, and adding a NULL check on the allocation result. | ||||
| CVE-2026-89591 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: initialize job domain before cleanup paths rocket_ioctl_submit_job() releases rjob through rocket_job_put() on allocation error paths. rocket_job_cleanup() unconditionally calls rocket_iommu_domain_put(job->domain), but job->domain is assigned only after task copying and BO lookups. A failure before that assignment can therefore clean up a job with a NULL domain pointer. Take the per-file domain reference before the first error path can release rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so the common cleanup path cannot free the task array again after a task-copy error. | ||||
| CVE-2026-89590 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: Fix error path handling in rocket_job_run() In rocket_job_run(), after taking an extra fence reference for job->done_fence via dma_fence_get(), the error paths have three bugs: - The dma_fence reference held by job->done_fence is never released, causing a reference leak. - pm_runtime_get_sync() increments the usage counter even on failure, but the error path does not decrement it, leaking the runtime PM reference and preventing the NPU from suspending. - A valid but unsignaled fence is returned to the DRM scheduler, which triggers WARN("Fence ... released with pending signals!") when the scheduler drops its reference. Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get() which auto-balances the usage counter on failure, releasing both fence references on error, and returning ERR_PTR(ret) instead of the unsignaled fence. [tomeu: Refactored error paths to use consolidated goto labels] | ||||
| CVE-2026-89587 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: fix stack buffer overflow in query_capability() query_capability() copies four ACPI buffer objects returned by the firmware _DSM into fixed-size u8[16] fields in struct pfru_update_cap_info using memcpy with the firmware-supplied length: memcpy(&cap_hdr->code_type, elements[CAP_CODE_TYPE_IDX].buffer.pointer, elements[CAP_CODE_TYPE_IDX].buffer.length); The same pattern repeats for drv_type, platform_id, and oem_id. If the firmware returns buffer.length > 16 for any of these fields, memcpy writes past the destination array. struct pfru_update_cap_info is stack-allocated in pfru_ioctl(). Confirmed with KASAN on 7.2-rc6: three stack-out-of-bounds reports are generated when a DSM returns 64-byte buffers, with writes reaching 44 bytes past the end of cap_hdr's [64, 156) frame window into adjacent stack redzones. Introduce a helper pointer to out_obj->package.elements and use it to validate each buffer length against its destination field size before copying, returning -EINVAL if the firmware supplies an oversized buffer. | ||||
| CVE-2026-89585 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: charlcd: cancel backlight work on registration failure With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before charlcd_register() calls misc_register(). If registration fails, the caller frees the charlcd object while delayed work still contains its address. Add charlcd_deinit() to cancel the delayed work and turn the backlight off. Use it for both registration rollback and normal unregistration. | ||||
| CVE-2026-89584 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: validate user space vectors during extraction The bio-based drivers don't necessarily check the alignment split, and stacking block drivers don't always handle a misalignment detected after submitting the bio. Validate user vectors against the device's dma_alignment as the bio is built from the iov_iter, rejecting misaligned early with -EINVAL. | ||||
| CVE-2026-89583 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix OOB read in eir_get_service_data() eir_get_service_data() walks the advertising data for a Service Data field with a matching UUID. On a mismatch it advances: eir += dlen; eir_len -= dlen; eir_get_data() reports dlen as the field's data length, but the field spans dlen + 2 bytes once its length and type bytes count, and more when non-Service-Data fields were skipped to reach it. The pointer lands correctly on the next field. eir_len does not, and the shortfall compounds across fields until eir_get_data() reads the length and type bytes of a "field" past the end of the buffer. For an ISO broadcast sink that buffer is hcon->le_per_adv_data[], filled from the periodic advertising reports of a remote broadcaster. A PA payload packed with mismatching Service Data fields walks off the array into the rest of struct hci_conn. A drifted field that matches the BAA UUID puts those bytes in iso_pi(sk)->base, where user space reads them back with getsockopt(BT_ISO_BASE). Recompute eir_len from the end of the buffer each iteration. | ||||
| CVE-2026-89582 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix double free in bnx2x_init_firmware() error path bnx2x_init_firmware() frees bp->init_ops, bp->init_data and bp->init_ops_offsets in its error path without setting them to NULL. The cleanup function bnx2x_release_firmware() frees the same three pointers unconditionally, so if init_firmware fails and release_firmware is later called (e.g. from __bnx2x_remove or through the function state machine), all three are freed a second time. Set each pointer to NULL after kfree() in the error path so that the subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op. | ||||
| CVE-2026-89581 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix per-CPU address resolution into an extended register The destination of the per-CPU address MOV is encoded in ModRM.reg, which is extended by REX.R, but the REX prefix is built with add_1mod(), which sets REX.B. REX.B extends ModRM.rm and SIB.base, and this instruction addresses memory as disp32 with no base, so the bit has no effect at all and the high register bit is simply lost. Every is_ereg() destination therefore resolves to the wrong register, picking whichever one shares the low three bits: R5 -> RAX R7 -> RBP R8 -> RSI R9 -> RDI With BPF_REG_5, whose reg2hex is 0, the emitted 65 49 03 04 25 <off> add %gs:<off>,%rax adds the per-CPU offset to RAX rather than R8. The destination keeps the unadjusted address and RAX is clobbered, so the program goes on to dereference a pointer that was never made per-CPU: BUG: unable to handle page fault for address: 0000607e386a8894 RIP: bpf_prog_707837aafd2aa9ae_update_percpu_data+0x93/0xc9 Call Trace: __bpf_prog_test_run_raw_tp+0x2dc/0x7d0 __flush_smp_call_function_queue+0x1e9/0xc80 Kernel panic - not syncing: Fatal exception in interrupt R5 is the mildest of the four, aliasing a scratch register and faulting at the store. R7 aliases RBP and would corrupt the frame pointer, R8 and R9 alias the argument registers. Use add_2mod() so the register goes through REX.R, matching how add_2reg() places it in ModRM.reg and how emit_priv_frame_ptr() hardcodes 0x4c for the same instruction with R9. Encodings for the non-extended registers are unchanged. Problem showed up when trying to resurrect BPF_GCC CI (selftests built with BPF_GCC). This has gone unnoticed because clang reloads the address into R1 before each per-CPU access, so the destination is never an extended register. GCC keeps several per-CPU addresses live at once, and test_progs-bpf_gcc panics the kernel in global_percpu_data/init, where the address of a .percpu variable ends up in R5. | ||||
| CVE-2026-89580 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and releases its recursion slot via put_callchain_entry() before returning, so nothing keeps the entry reserved while __bpf_get_stack() consumes it below. A preemptible BPF program (e.g. a non-sleepable raw tracepoint program on a PREEMPT kernel, which runs under migrate_disable() but not preempt_disable()) can be scheduled out between obtaining the entry and the copy. Another task scheduled on the same CPU then reuses the same per-CPU buffer and overwrites trace->nr with a larger value. copy_len is then computed from the inflated trace->nr and can exceed the caller's buffer, causing an out-of-bounds write in the memcpy() and in the build_id path. The rcu_read_lock() taken here alone does not prevent this. It is only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does not disable preemption; it merely keeps perf's callchain buffer array alive (freed via call_rcu()) and does nothing to stop another task from reusing the entry. Disable preemption around obtaining the callchain entry and copying it into the caller's buffer, so the entry cannot be reused underneath us and trace->nr stays bounded by max_depth. Build ID resolution may fault and is therefore deferred until after preemption is re-enabled; by then the instruction pointers have already been copied into buf, so it operates only on that private copy. Note, preempt_disable() also subsumes the buffer-lifetime guarantee the rcu_read_lock() provided, since a preempt-disabled section is an RCU read-side critical section for the callchain buffers' call_rcu() reclaim. [ changed Fixes: commit ] | ||||
| CVE-2026-89578 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-io: clone the source bio instead of copying its biovec For DM_IO_BIO requests, do_region() built each destination bio by walking the source bio's biovec and re-adding the pages one at a time, tracking the remaining transfer in sectors. The vector lengths are byte granular and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split across pages), so the sector-based accounting could lose a sub-sector fragment: to_sector() truncated the remainder and the outer loop spun forever submitting empty bios, hanging the I/O. There is no need to rebuild the biovec at all. The destination reads into (or writes from) exactly the same pages as the source bio, so the bio can simply clone the source's biovec with bio_alloc_clone() and remap it to the target device. The clone inherits the source's iterator and alignment, and the block layer splits it to the target's limits on submission, so the whole region maps to a single cloned bio with no manual page copying or sector accounting. This removes the per-page copy path (and its open-coded bvec dpages helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to a dm-mirror device. Page-list, vma and kmem sources keep the existing copy path. | ||||
| CVE-2026-89576 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-era: fix shadowed superblock leak on take-snap failure metadata_take_snap() bumps the live superblock refcount and then dm_tm_shadow_block() allocates a new block for the metadata snapshot. If the subsequent dm_sm_inc_block() of writeset_tree_root or era_array_root fails, the function only unlocks the clone and returns. The newly allocated shadow block is never returned to the metadata space map, so each failed take-snap permanently leaks one metadata block. Free the clone with dm_sm_dec_block() on those error paths, matching the final step of metadata_drop_snap(). | ||||
| CVE-2026-89575 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm raid1: reserve space for NUL-terminator in build_constructor_string() Reserve space for the termination NUL after the maximum 20 decimal digits of a long long value to avoid buffer overflow in sprintf(). | ||||