Export limit exceeded: 409264 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409264 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72064 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Sync page pool RX frags for CPU MANA allocates RX buffers from page pool fragments when frag_count is greater than 1. In that case the buffers remain DMA mapped by page pool and the RX completion path does not call dma_unmap_single(). As a result, the implicit sync-for-CPU normally performed by dma_unmap_single() is missing before the packet data is passed to the networking stack. This breaks RX on configurations which require explicit DMA syncing, for example when booted with swiotlb=force. Fix this by recording the page pool page and DMA sync offset when the RX buffer is allocated, and syncing the received packet range for CPU access before handing the RX buffer to the stack. | ||||
| CVE-2026-72061 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sit: require CAP_NET_ADMIN in the device netns for changelink ipip6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. sit was the one tunnel type not covered by the recent series that added this check to the other changelink() handlers. | ||||
| CVE-2026-72057 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: preserve tc_skb_cb across defragmentation tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through act_ct therefore loses qdisc metadata such as pkt_segs and can trigger WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled. Save and restore the full tc_skb_cb around nf_ct_handle_fragments(), matching the pattern used by ovs_ct_handle_fragments(). | ||||
| CVE-2026-72055 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink vti6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72054 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink vti_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72053 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipip: require CAP_NET_ADMIN in the device netns for changelink ipip_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72052 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink ip6gre_changelink() and ip6erspan_changelink() operate on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate both ops on rtnl_dev_link_net_capable() at their top, before any attribute is parsed. | ||||
| CVE-2026-72051 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72049 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY dump on the legacy IEEE802154_NL generic-netlink family. Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the modern nl802154 family exposes their equivalents to unprivileged readers by design (NL802154_CMD_GET_WPAN_PHY and NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged users" annotations). | ||||
| CVE-2026-72045 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block. | ||||
| CVE-2026-72041 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: espintcp: use sk_msg_free_partial to fix partial send sk_msg_free_partial() ensures consistency of the skmsg at every iteration, without having to manually handle uncharges and offsets. This simplifies the code, and fixes some bugs in skmsg accounting when we don't send the full contents. | ||||
| CVE-2026-72036 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked multiq_dequeue() takes a packet from a band's child with a direct ->dequeue() call after multiq_peek() peeked it. When the child is non-work-conserving the peek stashes the skb in the child's gso_skb, so the direct dequeue returns a different skb and orphans the stash, desyncing the child's qlen/backlog. With a qfq child reached through a peeking parent (e.g. tbf) this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_prio already does and as sch_red and sch_sfb were just fixed to do. The helper is a no-op when the child has no stash, so a work-conserving child is unaffected. | ||||
| CVE-2026-72035 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked When taprio's software path peeks a non-work-conserving child qdisc, the child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq() then takes the packet with a direct child ->dequeue() call, which ignores that stash, orphans the peeked skb and desyncs the child's qlen/backlog. With a qfq child this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb now do. The helper returns the child's stashed skb first and is a no-op when there is none, so a work-conserving child is unaffected and the gated path now consumes the skb whose length was charged to the budget. | ||||
| CVE-2026-72034 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fhandle: reject detached mounts in capable_wrt_mount() The recent fhandle RCU fix moved the mount namespace capability check into capable_wrt_mount(), so a non-NULL mnt_namespace survives the ns_capable() dereference. The helper still assumes the later READ_ONCE(mount->mnt_ns) must be non-NULL because may_decode_fh() checked is_mounted() first. That assumption is not stable. A detached mount from open_tree(..., OPEN_TREE_CLONE) can be dissolved on fput while open_by_handle_at() is between those checks, and umount_tree() can clear mount->mnt_ns. If the helper observes NULL, it dereferences mnt_ns->user_ns and panics. Return false when the RCU read observes a detached mount. This keeps the relaxed permission path conservative: a mount no longer attached to a namespace cannot authorize open_by_handle_at() access. | ||||
| CVE-2026-72029 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up. | ||||
| CVE-2026-72024 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: remove interfaces with RCU list deletion Queue wake, stop, and disable paths walk local->interfaces under RCU. The bulk hardware teardown path removes entries with list_del(), so an asynchronous transmit completion can follow a poisoned list node in ieee802154_wake_queue(). Use list_del_rcu() as in the single-interface removal path. The following unregister_netdevice() waits for in-flight RCU readers before freeing the netdevice, so no separate grace-period wait is needed. | ||||
| CVE-2026-72021 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset. | ||||
| CVE-2026-72020 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reset full ip_vs_seq structs in ip_vs_conn_new Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn object with kmem_cache_alloc(). The function then initializes many fields explicitly, but only resets in_seq.delta and out_seq.delta in the two struct ip_vs_seq members. That leaves init_seq and previous_delta uninitialized. This is normally harmless while the corresponding IP_VS_CONN_F_IN_SEQ or IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync message, however, ip_vs_proc_conn() preserves those flags from IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with SEQ flags set but with the rest of in_seq/out_seq still containing stale slab data. When a packet for such a connection is later handled by an IPVS application helper, vs_fix_seq() and vs_fix_ack_seq() use previous_delta and init_seq to rewrite TCP sequence numbers. A malformed sync message can therefore make forwarded packets carry stale slab bytes in their TCP seq/ack numbers, and can also corrupt the forwarded TCP flow. Reset both struct ip_vs_seq members completely before publishing the connection. This matches the existing "reset struct ip_vs_seq" comment and keeps the sequence-adjustment gates inactive unless valid sequence data is installed later. | ||||
| CVE-2026-72019 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb->head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose. | ||||
| CVE-2026-72014 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: drbd: reject data replies with an out-of-range payload size recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an outstanding read request. The peer-supplied payload length reaches it as the signed int data_size, and two peer-controlled inputs can make it negative. With a negotiated data-integrity-alg the digest length is subtracted first, so a reply whose payload is smaller than the digest underflows data_size. With no integrity algorithm (the default) data_size is assigned from the unsigned h95/h100 wire length and drbdd() never bounds it for a payload-carrying command, so a length above INT_MAX casts it negative; this path needs no non-default feature. The bio receive loop then computes expect = min_t(int, data_size, bv_len), which is negative, and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX into the first mapped page. The sibling receive path read_in_block() is not affected: it uses an unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving. Reject a data reply whose size is negative after the optional digest subtraction, covering both triggers. Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen bytes past a bio page in the receiver, corrupting kernel memory. A node that reads from its peer (a diskless node, or read-balancing to the peer) is exposed in the default configuration; data-integrity-alg is not required. | ||||