Export limit exceeded: 20134 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20134 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40150 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid migrating empty section It reports a bug from device w/ zufs: F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT F2FS-fs (dm-64): Stopped filesystem due to reason: 4 Thread A Thread B - f2fs_expand_inode_data - f2fs_allocate_pinning_section - f2fs_gc_range - do_garbage_collect w/ segno #x - writepage - f2fs_allocate_data_block - new_curseg - allocate segno #x The root cause is: fallocate on pinning file may race w/ block allocation as above, result in do_garbage_collect() from fallocate() may migrate segment which is just allocated by a log, the log will update segment type in its in-memory structure, however GC will get segment type from on-disk SSA block, once segment type changes by log, we can detect such inconsistency, then shutdown filesystem. In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE), however segno #173822 was just allocated as data type segment, so in-memory SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA). Change as below to fix this issue: - check whether current section is empty before gc - add sanity checks on do_garbage_collect() to avoid any race case, result in migrating segment used by log. - btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". | ||||
| CVE-2025-40153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: avoid soft lockup when mprotect to large memory area When calling mprotect() to a large hugetlb memory area in our customer's workload (~300GB hugetlb memory), soft lockup was observed: watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916] CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7 Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mte_clear_page_tags+0x14/0x24 lr : mte_sync_tags+0x1c0/0x240 sp : ffff80003150bb80 x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000 x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458 x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000 x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000 x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000 Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8 Soft lockup is not triggered with THP or base page because there is cond_resched() called for each PMD size. Although the soft lockup was triggered by MTE, it should be not MTE specific. The other processing which takes long time in the loop may trigger soft lockup too. So add cond_resched() for hugetlb to avoid soft lockup. | ||||
| CVE-2023-53789 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Improve page fault error reporting If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> [joro: Edit commit message] | ||||
| CVE-2025-40189 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in lan78xx_read_raw_eeprom Syzbot reported read of uninitialized variable BUG with following call stack. lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout ===================================================== BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707 Local variable sig.i.i created at: lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline] lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline] lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241 lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766 The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM read timeout errors (-ETIMEDOUT). In the fallthrough path, it first attempted to restore the pin configuration for LED outputs and then returned only the status of that restore operation, discarding the original timeout error. As a result, callers could mistakenly treat the data buffer as valid even though the EEPROM read had actually timed out with no data or partial data. To fix this, handle errors in restoring the LED pin configuration separately. If the restore succeeds, return any prior EEPROM timeout error correctly to the caller. | ||||
| CVE-2025-40185 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: ice_adapter: release xa entry on adapter allocation failure When ice_adapter_new() fails, the reserved XArray entry created by xa_insert() is not released. This causes subsequent insertions at the same index to return -EBUSY, potentially leading to NULL pointer dereferences. Reorder the operations as suggested by Przemek Kitszel: 1. Check if adapter already exists (xa_load) 2. Reserve the XArray slot (xa_reserve) 3. Allocate the adapter (ice_adapter_new) 4. Store the adapter (xa_store) | ||||
| CVE-2023-53793 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf tool x86: Fix perf_env memory leak Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` | ||||
| CVE-2023-53790 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zeroing allocated object from slab in bpf memory allocator Currently the freed element in bpf memory allocator may be immediately reused, for htab map the reuse will reinitialize special fields in map value (e.g., bpf_spin_lock), but lookup procedure may still access these special fields, and it may lead to hard-lockup as shown below: NMI backtrace for cpu 16 CPU: 16 PID: 2574 Comm: htab.bin Tainted: G L 6.1.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0 ...... Call Trace: <TASK> copy_map_value_locked+0xb7/0x170 bpf_map_copy_value+0x113/0x3c0 __sys_bpf+0x1c67/0x2780 __x64_sys_bpf+0x1c/0x20 do_syscall_64+0x30/0x60 entry_SYSCALL_64_after_hwframe+0x46/0xb0 ...... </TASK> For htab map, just like the preallocated case, these is no need to initialize these special fields in map value again once these fields have been initialized. For preallocated htab map, these fields are initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the similar thing for non-preallocated htab in bpf memory allocator. And there is no need to use __GFP_ZERO for per-cpu bpf memory allocator, because __alloc_percpu_gfp() does it implicitly. | ||||
| CVE-2025-40173 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/ip6_tunnel: Prevent perpetual tunnel growth Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. | ||||
| CVE-2025-40172 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages() Currently, if find_and_map_user_pages() takes a DMA xfer request from the user with a length field set to 0, or in a rare case, the host receives QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size is equal to the requested transaction size, the function will return 0 before allocating an sgt or setting the fields of the dma_xfer struct. In that case, encode_addr_size_pairs() will try to access the sgt which will lead to a general protection fault. Return an EINVAL in case the user provides a zero-sized ALP, or the device requests continuation after all of the bytes have been transferred. | ||||
| CVE-2025-40171 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: move lsop put work to nvmet_fc_ls_req_op It’s possible for more than one async command to be in flight from __nvmet_fc_send_ls_req. For each command, a tgtport reference is taken. In the current code, only one put work item is queued at a time, which results in a leaked reference. To fix this, move the work item to the nvmet_fc_ls_req_op struct, which already tracks all resources related to the command. | ||||
| CVE-2025-40151 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: No support of struct argument in trampoline programs The current implementation does not support struct argument. This causes a oops when running bpf selftest: $ ./test_progs -a tracing_struct Oops[#1]: CPU -1 Unable to handle kernel paging request at virtual address 0000000000000018, era == 9000000085bef268, ra == 90000000844f3938 rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 1-...0: (19 ticks this GP) idle=1094/1/0x4000000000000000 softirq=1380/1382 fqs=801 rcu: (detected by 0, t=5252 jiffies, g=1197, q=52 ncpus=4) Sending NMI from CPU 0 to CPUs 1: rcu: rcu_preempt kthread starved for 2495 jiffies! g1197 f0x0 RCU_GP_DOING_FQS(6) ->state=0x0 ->cpu=2 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 task_flags:0x208040 flags:0x00000800 Stack : 9000000100423e80 0000000000000402 0000000000000010 90000001003b0680 9000000085d88000 0000000000000000 0000000000000040 9000000087159350 9000000085c2b9b0 0000000000000001 900000008704a000 0000000000000005 00000000ffff355b 00000000ffff355b 0000000000000000 0000000000000004 9000000085d90510 0000000000000000 0000000000000002 7b5d998f8281e86e 00000000ffff355c 7b5d998f8281e86e 000000000000003f 9000000087159350 900000008715bf98 0000000000000005 9000000087036000 900000008704a000 9000000100407c98 90000001003aff80 900000008715c4c0 9000000085c2b9b0 00000000ffff355b 9000000085c33d3c 00000000000000b4 0000000000000000 9000000007002150 00000000ffff355b 9000000084615480 0000000007000002 ... Call Trace: [<9000000085c2a868>] __schedule+0x410/0x1520 [<9000000085c2b9ac>] schedule+0x34/0x190 [<9000000085c33d38>] schedule_timeout+0x98/0x140 [<90000000845e9120>] rcu_gp_fqs_loop+0x5f8/0x868 [<90000000845ed538>] rcu_gp_kthread+0x260/0x2e0 [<900000008454e8a4>] kthread+0x144/0x238 [<9000000085c26b60>] ret_from_kernel_thread+0x28/0xc8 [<90000000844f20e4>] ret_from_kernel_thread_asm+0xc/0x88 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 2: NMI backtrace for cpu 2 skipped: idling at idle_exit+0x0/0x4 Reject it for now. | ||||
| CVE-2022-50616 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: Use different devices for resource allocation and DT lookup Following by the below discussion, there's the potential UAF issue between regulator and mfd. https://lore.kernel.org/all/20221128143601.1698148-1-yangyingliang@huawei.com/ From the analysis of Yingliang CPU A |CPU B mt6370_probe() | devm_mfd_add_devices() | |mt6370_regulator_probe() | regulator_register() | //allocate init_data and add it to devres | regulator_of_get_init_data() i2c_unregister_device() | device_del() | devres_release_all() | // init_data is freed | release_nodes() | | // using init_data causes UAF | regulator_register() It's common to use mfd core to create child device for the regulator. In order to do the DT lookup for init data, the child that registered the regulator would pass its parent as the parameter. And this causes init data resource allocated to its parent, not itself. The issue happen when parent device is going to release and regulator core is still doing some operation of init data constraint for the regulator of child device. To fix it, this patch expand 'regulator_register' API to use the different devices for init data allocation and DT lookup. | ||||
| CVE-2022-50615 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() pci_get_device() will increase the reference count for the returned pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its reference count increased. We need to call pci_dev_put() to decrease the reference count. Let's add the missing pci_dev_put(). | ||||
| CVE-2025-40308 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. | ||||
| CVE-2025-40148 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL pointer checks in dc_stream cursor attribute functions The function dc_stream_set_cursor_attributes() currently dereferences the `stream` pointer and nested members `stream->ctx->dc->current_state` without checking for NULL. All callers of these functions, such as in `dcn30_apply_idle_power_optimizations()` and `amdgpu_dm_plane_handle_cursor_update()`, already perform NULL checks before calling these functions. Fixes below: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:336 dc_stream_program_cursor_attributes() error: we previously assumed 'stream' could be null (see line 334) drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c 327 bool dc_stream_program_cursor_attributes( 328 struct dc_stream_state *stream, 329 const struct dc_cursor_attributes *attributes) 330 { 331 struct dc *dc; 332 bool reset_idle_optimizations = false; 333 334 dc = stream ? stream->ctx->dc : NULL; ^^^^^^ The old code assumed stream could be NULL. 335 --> 336 if (dc_stream_set_cursor_attributes(stream, attributes)) { ^^^^^^ The refactor added an unchecked dereference. drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c 313 bool dc_stream_set_cursor_attributes( 314 struct dc_stream_state *stream, 315 const struct dc_cursor_attributes *attributes) 316 { 317 bool result = false; 318 319 if (dc_stream_check_cursor_attributes(stream, stream->ctx->dc->current_state, attributes)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here. This function used to check for if stream as NULL and return false at the start. Probably we should add that back. | ||||
| CVE-2025-40146 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix potential deadlock while nr_requests grown Allocate and free sched_tags while queue is freezed can deadlock[1], this is a long term problem, hence allocate memory before freezing queue and free memory after queue is unfreezed. [1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/ | ||||
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-40341 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: futex: Don't leak robust_list pointer on exec race sys_get_robust_list() and compat_get_robust_list() use ptrace_may_access() to check if the calling task is allowed to access another task's robust_list pointer. This check is racy against a concurrent exec() in the target process. During exec(), a task may transition from a non-privileged binary to a privileged one (e.g., setuid binary) and its credentials/memory mappings may change. If get_robust_list() performs ptrace_may_access() before this transition, it may erroneously allow access to sensitive information after the target becomes privileged. A racy access allows an attacker to exploit a window during which ptrace_may_access() passes before a target process transitions to a privileged state via exec(). For example, consider a non-privileged task T that is about to execute a setuid-root binary. An attacker task A calls get_robust_list(T) while T is still unprivileged. Since ptrace_may_access() checks permissions based on current credentials, it succeeds. However, if T begins exec immediately afterwards, it becomes privileged and may change its memory mappings. Because get_robust_list() proceeds to access T->robust_list without synchronizing with exec() it may read user-space pointers from a now-privileged process. This violates the intended post-exec access restrictions and could expose sensitive memory addresses or be used as a primitive in a larger exploit chain. Consequently, the race can lead to unauthorized disclosure of information across privilege boundaries and poses a potential security risk. Take a read lock on signal->exec_update_lock prior to invoking ptrace_may_access() and accessing the robust_list/compat_robust_list. This ensures that the target task's exec state remains stable during the check, allowing for consistent and synchronized validation of credentials. | ||||
| CVE-2025-40337 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Correctly handle Rx checksum offload errors The stmmac_rx function would previously set skb->ip_summed to CHECKSUM_UNNECESSARY if hardware checksum offload (CoE) was enabled and the packet was of a known IP ethertype. However, this logic failed to check if the hardware had actually reported a checksum error. The hardware status, indicating a header or payload checksum failure, was being ignored at this stage. This could cause corrupt packets to be passed up the network stack as valid. This patch corrects the logic by checking the `csum_none` status flag, which is set when the hardware reports a checksum error. If this flag is set, skb->ip_summed is now correctly set to CHECKSUM_NONE, ensuring the kernel's network stack will perform its own validation and properly handle the corrupt packet. | ||||
| CVE-2025-40320 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential cfid UAF in smb2_query_info_compound When smb2_query_info_compound() retries, a previously allocated cfid may have been freed in the first attempt. Because cfid wasn't reset on replay, later cleanup could act on a stale pointer, leading to a potential use-after-free. Reinitialize cfid to NULL under the replay label. Example trace (trimmed): refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110 [...] RIP: 0010:refcount_warn_saturate+0x9c/0x110 [...] Call Trace: <TASK> smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? step_into+0x10d/0x690 ? __legitimize_path+0x28/0x60 smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? kmem_cache_alloc+0x18a/0x340 ? getname_flags+0x46/0x1e0 cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] statfs_by_dentry+0x67/0x90 vfs_statfs+0x16/0xd0 user_statfs+0x54/0xa0 __do_sys_statfs+0x20/0x50 do_syscall_64+0x58/0x80 | ||||