Export limit exceeded: 371942 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371942 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40334 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq buffer virtual address and size It needs to validate the userq object virtual address to determine whether it is residented in a valid vm mapping. | ||||
| CVE-2025-40331 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: Prevent TOCTOU out-of-bounds write For the following path not holding the sock lock, sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump() make sure not to exceed bounds in case the address list has grown between buffer allocation (time-of-check) and write (time-of-use). | ||||
| CVE-2025-40328 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_close_cached_fid() find_or_create_cached_dir() could grab a new reference after kref_put() had seen the refcount drop to zero but before cfid_list_lock is acquired in smb2_close_cached_fid(), leading to use-after-free. Switch to kref_put_lock() so cfid_release() is called with cfid_list_lock held, closing that gap. | ||||
| CVE-2025-40326 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Define actions for the new time_deleg FATTR4 attributes NFSv4 clients won't send legitimate GETATTR requests for these new attributes because they are intended to be used only with CB_GETATTR and SETATTR. But NFSD has to do something besides crashing if it ever sees a GETATTR request that queries these attributes. RFC 8881 Section 18.7.3 states: > The server MUST return a value for each attribute that the client > requests if the attribute is supported by the server for the > target file system. If the server does not support a particular > attribute on the target file system, then it MUST NOT return the > attribute value and MUST NOT set the attribute bit in the result > bitmap. The server MUST return an error if it supports an > attribute on the target but cannot obtain its value. In that case, > no attribute values will be returned. Further, RFC 9754 Section 5 states: > These new attributes are invalid to be used with GETATTR, VERIFY, > and NVERIFY, and they can only be used with CB_GETATTR and SETATTR > by a client holding an appropriate delegation. Thus there does not appear to be a specific server response mandated by specification. Taking the guidance that querying these attributes via GETATTR is "invalid", NFSD will return nfserr_inval, failing the request entirely. | ||||
| CVE-2026-56847 | 2026-07-30 | N/A | ||
| A flaw in Node.js Permission Model enforcement allows `trace_events.createTracing().enable()` Writes Trace Logs Outside `--allow-fs-write`. This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations. This vulnerability affects Node.js **22.x**, **24.x**, and **26.x**. | ||||
| CVE-2026-58043 | 2026-07-30 | N/A | ||
| A flaw in Node.js Permission Model enforcement can over-grant filesystem access across radix-tree prefix boundaries. Under `--permission`, an attacker who is granted access to one path can abuse boundary handling to read from or write to paths outside the intended filesystem allowlist. This vulnerability affects Node.js **main**, **22.x**, **24.x**, and **26.x**. | ||||
| CVE-2025-40324 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix crash in nfsd4_read_release() When tracing is enabled, the trace_nfsd_read_done trace point crashes during the pynfs read.testNoFh test. | ||||
| CVE-2026-56850 | 2026-07-30 | N/A | ||
| A flaw in Node.js HTTPS Agent connection reuse can cause PFX object-array key collisions, allowing mutual TLS (mTLS) client identities to be reused across requests configured with different client certificates. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**. | ||||
| CVE-2026-21639 | 2 Ubiquiti, Ui | 12 Airfiber Af60, Airfiber Af60 Xg, Airmax Ac and 9 more | 2026-07-30 | 8.8 High |
| A malicious actor in Wi-Fi range of the affected product could leverage a vulnerability in the airMAX Wireless Protocol to achieve a remote code execution (RCE) within the affected product. | ||||
| CVE-2026-58040 | 2026-07-30 | N/A | ||
| An incomplete fix has been identified in Node.js: HTTPS Agent TLS session reuse skips hostname verification across identity policies (incomplete fix of CVE-2026-48934). This vulnerability affects Node.js **22.x**, **24.x**, and **26.x**. | ||||
| CVE-2025-40323 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: Set fb_display[i]->mode to NULL when the mode is released Recently, we discovered the following issue through syzkaller: BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0 Read of size 4 at addr ff11000001b3c69c by task syz.xxx ... Call Trace: <TASK> dump_stack_lvl+0xab/0xe0 print_address_description.constprop.0+0x2c/0x390 print_report+0xb9/0x280 kasan_report+0xb8/0xf0 fb_mode_is_equal+0x285/0x2f0 fbcon_mode_deleted+0x129/0x180 fb_set_var+0xe7f/0x11d0 do_fb_ioctl+0x6a0/0x750 fb_ioctl+0xe0/0x140 __x64_sys_ioctl+0x193/0x210 do_syscall_64+0x5f/0x9c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Based on experimentation and analysis, during framebuffer unregistration, only the memory of fb_info->modelist is freed, without setting the corresponding fb_display[i]->mode to NULL for the freed modes. This leads to UAF issues during subsequent accesses. Here's an example of reproduction steps: 1. With /dev/fb0 already registered in the system, load a kernel module to register a new device /dev/fb1; 2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP); 3. Switch console from fb to VGA (to allow normal rmmod of the ko); 4. Unload the kernel module, at this point fb1's modelist is freed, leaving a wild pointer in fb_display[]; 5. Trigger the bug via system calls through fb0 attempting to delete a mode from fb0. Add a check in do_unregister_framebuffer(): if the mode to be freed exists in fb_display[], set the corresponding mode pointer to NULL. | ||||
| CVE-2025-40322 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: bitblit: bound-check glyph index in bit_putcs* bit_putcs_aligned()/unaligned() derived the glyph pointer from the character value masked by 0xff/0x1ff, which may exceed the actual font's glyph count and read past the end of the built-in font array. Clamp the index to the actual glyph count before computing the address. This fixes a global out-of-bounds read reported by syzbot. | ||||
| CVE-2025-40320 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential cfid UAF in smb2_query_info_compound When smb2_query_info_compound() retries, a previously allocated cfid may have been freed in the first attempt. Because cfid wasn't reset on replay, later cleanup could act on a stale pointer, leading to a potential use-after-free. Reinitialize cfid to NULL under the replay label. Example trace (trimmed): refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110 [...] RIP: 0010:refcount_warn_saturate+0x9c/0x110 [...] Call Trace: <TASK> smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? step_into+0x10d/0x690 ? __legitimize_path+0x28/0x60 smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? kmem_cache_alloc+0x18a/0x340 ? getname_flags+0x46/0x1e0 cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] statfs_by_dentry+0x67/0x90 vfs_statfs+0x16/0xd0 user_statfs+0x54/0xa0 __do_sys_statfs+0x20/0x50 do_syscall_64+0x58/0x80 | ||||
| CVE-2025-40319 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Sync pending IRQ work before freeing ring buffer Fix a race where irq_work can be queued in bpf_ringbuf_commit() but the ring buffer is freed before the work executes. In the syzbot reproducer, a BPF program attached to sched_switch triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer is freed before this work executes, the irq_work thread may accesses freed memory. Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work complete before freeing the buffer. | ||||
| CVE-2025-40318 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix race in hci_cmd_sync_dequeue_once hci_cmd_sync_dequeue_once() does lookup and then cancel the entry under two separate lock sections. Meanwhile, hci_cmd_sync_work() can also delete the same entry, leading to double list_del() and "UAF". Fix this by holding cmd_sync_work_lock across both lookup and cancel, so that the entry cannot be removed concurrently. | ||||
| CVE-2025-40317 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regmap: slimbus: fix bus_context pointer in regmap init calls Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap. That commit breaks audio playback, for instance, on sdm845 Thundercomm Dragonboard 845c board: Unable to handle kernel paging request at virtual address ffff8000847cbad4 ... CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT Hardware name: Thundercomm Dragonboard 845c (DT) ... Call trace: slim_xfer_msg+0x24/0x1ac [slimbus] (P) slim_read+0x48/0x74 [slimbus] regmap_slimbus_read+0x18/0x24 [regmap_slimbus] _regmap_raw_read+0xe8/0x174 _regmap_bus_read+0x44/0x80 _regmap_read+0x60/0xd8 _regmap_update_bits+0xf4/0x140 _regmap_select_page+0xa8/0x124 _regmap_raw_write_impl+0x3b8/0x65c _regmap_bus_raw_write+0x60/0x80 _regmap_write+0x58/0xc0 regmap_write+0x4c/0x80 wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x] snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core] __soc_pcm_hw_params+0x22c/0x634 [snd_soc_core] dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core] dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core] snd_pcm_hw_params+0x124/0x464 [snd_pcm] snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm] snd_pcm_ioctl+0x34/0x4c [snd_pcm] __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xec el0t_64_sync_handler+0xa0/0xf0 el0t_64_sync+0x198/0x19c The __devm_regmap_init_slimbus() started to be used instead of __regmap_init_slimbus() after the commit mentioned above and turns out the incorrect bus_context pointer (3rd argument) was used in __devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or the first user of devm_regmap_init_slimbus() but we should fix it till the point where __devm_regmap_init_slimbus() was introduced therefore two "Fixes" tags. While at this, also correct the same argument in __regmap_init_slimbus(). | ||||
| CVE-2025-40309 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_conn_free BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline] BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline] BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352 CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted 6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci13 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x191/0x550 mm/kasan/report.c:482 kasan_report+0xc4/0x100 mm/kasan/report.c:595 sco_conn_free net/bluetooth/sco.c:87 [inline] kref_put include/linux/kref.h:65 [inline] sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441 hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline] hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313 hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121 hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147 hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319 worker_thread+0xbee/0x1200 kernel/workqueue.c:3400 kthread+0x3c7/0x870 kernel/kthread.c:463 ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 31370: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4382 [inline] __kmalloc_noprof+0x22f/0x390 mm/slub.c:4394 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xae/0x220 net/core/sock.c:2239 sk_alloc+0x34/0x5a0 net/core/sock.c:2295 bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151 sco_sock_alloc net/bluetooth/sco.c:562 [inline] sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593 bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135 __sock_create+0x3ad/0x780 net/socket.c:1589 sock_create net/socket.c:1647 [inline] __sys_socket_create net/socket.c:1684 [inline] __sys_socket+0xd5/0x330 net/socket.c:1731 __do_sys_socket net/socket.c:1745 [inline] __se_sys_socket net/socket.c:1743 [inline] __x64_sys_socket+0x7a/0x90 net/socket.c:1743 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 31374: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2428 [inline] slab_free mm/slub.c:4701 [inline] kfree+0x199/0x3b0 mm/slub.c:4900 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x4aa/0x630 net/core/sock.c:2373 sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333 __sock_release net/socket.c:649 [inline] sock_close+0xb8/0x230 net/socket.c:1439 __fput+0x3d1/0x9e0 fs/file_table.c:468 task_work_run+0x206/0x2a0 kernel/task_work.c:227 get_signal+0x1201/0x1410 kernel/signal.c:2807 arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] s ---truncated--- | ||||
| CVE-2025-40307 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: validate cluster allocation bits of the allocation bitmap syzbot created an exfat image with cluster bits not set for the allocation bitmap. exfat-fs reads and uses the allocation bitmap without checking this. The problem is that if the start cluster of the allocation bitmap is 6, cluster 6 can be allocated when creating a directory with mkdir. exfat zeros out this cluster in exfat_mkdir, which can delete existing entries. This can reallocate the allocated entries. In addition, the allocation bitmap is also zeroed out, so cluster 6 can be reallocated. This patch adds exfat_test_bitmap_range to validate that clusters used for the allocation bitmap are correctly marked as in-use. | ||||
| CVE-2025-40306 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: fix xattr related buffer overflow... Willy Tarreau <w@1wt.eu> forwarded me a message from Disclosure <disclosure@aisle.com> with the following warning: > The helper `xattr_key()` uses the pointer variable in the loop condition > rather than dereferencing it. As `key` is incremented, it remains non-NULL > (until it runs into unmapped memory), so the loop does not terminate on > valid C strings and will walk memory indefinitely, consuming CPU or hanging > the thread. I easily reproduced this with setfattr and getfattr, causing a kernel oops, hung user processes and corrupted orangefs files. Disclosure sent along a diff (not a patch) with a suggested fix, which I based this patch on. After xattr_key started working right, xfstest generic/069 exposed an xattr related memory leak that lead to OOM. xattr_key returns a hashed key. When adding xattrs to the orangefs xattr cache, orangefs used hash_add, a kernel hashing macro. hash_add also hashes the key using hash_log which resulted in additions to the xattr cache going to the wrong hash bucket. generic/069 tortures a single file and orangefs does a getattr for the xattr "security.capability" every time. Orangefs negative caches on xattrs which includes a kmalloc. Since adds to the xattr cache were going to the wrong bucket, every getattr for "security.capability" resulted in another kmalloc, none of which were ever freed. I changed the two uses of hash_add to hlist_add_head instead and the memory leak ceased and generic/069 quit throwing furniture. | ||||
| CVE-2025-40304 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds Add bounds checking to prevent writes past framebuffer boundaries when rendering text near screen edges. Return early if the Y position is off-screen and clip image height to screen boundary. Break from the rendering loop if the X position is off-screen. When clipping image width to fit the screen, update the character count to match the clipped width to prevent buffer size mismatches. Without the character count update, bit_putcs_aligned and bit_putcs_unaligned receive mismatched parameters where the buffer is allocated for the clipped width but cnt reflects the original larger count, causing out-of-bounds writes. | ||||