Export limit exceeded: 24352 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24352 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90408 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90168 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2023-40283 | 4 Canonical, Debian, Linux and 1 more | 9 Ubuntu Linux, Debian Linux, Linux Kernel and 6 more | 2026-09-18 | 7.8 High |
| An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled. | ||||
| CVE-2023-1390 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Aus and 2 more | 2026-09-18 | 7.5 High |
| A remote denial of service vulnerability was found in the Linux kernel’s TIPC kernel module. The while loop in tipc_link_xmit() hits an unknown state while attempting to parse SKBs, which are not in the queue. Sending two small UDP packets to a system with a UDP bearer results in the CPU utilization for the system to instantly spike to 100%, causing a denial of service condition. | ||||
| CVE-2023-1380 | 5 Canonical, Debian, Linux and 2 more | 14 Ubuntu Linux, Debian Linux, Linux Kernel and 11 more | 2026-09-18 | 7.1 High |
| A slab-out-of-bound read problem was found in brcmf_get_assoc_ies in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux Kernel. This issue could occur when assoc_info->req_len data is bigger than the size of the buffer, defined as WL_EXTRA_BUF_MAX, leading to a denial of service. | ||||
| CVE-2023-1118 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel Eus and 1 more | 2026-09-18 | 7.8 High |
| A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. | ||||
| CVE-2023-35788 | 5 Canonical, Debian, Linux and 2 more | 20 Ubuntu Linux, Debian Linux, Linux Kernel and 17 more | 2026-09-18 | 7.8 High |
| An issue was discovered in fl_set_geneve_opt in net/sched/cls_flower.c in the Linux kernel before 6.3.7. It allows an out-of-bounds write in the flower classifier code via TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets. This may result in denial of service or privilege escalation. | ||||
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||
| CVE-2026-53176 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject any login PDU shorter than ISER_HEADERS_LEN before the subtraction, mirroring the existing early return on a failed work completion, so login_req_len can never go negative. The upper bound was already safe: a posted login buffer cannot deliver more than ISER_RX_PAYLOAD_SIZE, so the difference stays at or below MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing lower bound needs to be added. | ||||
| CVE-2026-43112 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs. | ||||
| CVE-2026-31663 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: hold dev ref until after transport_finish NF_HOOK After async crypto completes, xfrm_input_resume() calls dev_put() immediately on re-entry before the skb reaches transport_finish. The skb->dev pointer is then used inside NF_HOOK and its okfn, which can race with device teardown. Remove the dev_put from the async resumption entry and instead drop the reference after the NF_HOOK call in transport_finish, using a saved device pointer since NF_HOOK may consume the skb. This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip the okfn. For non-transport exits (decaps, gro, drop) and secondary async return points, release the reference inline when async is set. | ||||
| CVE-2026-89797 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: ab8500_fg: fix use-after-free on remove ab8500_fg_remove() destroys the driver workqueue while the threaded interrupt handlers are still armed; they are devm-managed and freed only after ->remove() returns, so a handler that fires in that window queues work on the freed workqueue. Tear the workqueue down through devm instead, registering its cleanup after the power supply and before the interrupt requests. devm then frees the interrupts first, so the handlers can no longer queue work, before disabling the delayed and plain work items and destroying the workqueue. Disabling the items, rather than cancelling them, keeps them disabled so no producer (including the power-supply external_power_changed callback) can requeue them. Found by an in-house static analysis tool. | ||||
| CVE-2026-89804 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: fix mismatched DMA unmap size for large folios Device-private THP migration maps migration buffers with page_size() and records that length in dma_info->size. For a compound folio page_size() is PAGE_SIZE << order, but two teardown sites still pass a literal PAGE_SIZE to dma_unmap_page(): - nouveau_dmem_migrate_to_ram() on the success path, and - nouveau_dmem_migrate_copy_one() on the copy-error path. For an order > 0 folio this unmaps less than was mapped, leaking the remainder of the IOMMU/IOVA mapping. The other unmap sites, in nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already use the saved size; use it here too. | ||||
| CVE-2026-89809 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD queue triggers a NULL pointer dereference because the for loop that calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the if (pqn->q) block that initializes mqd_mgr. The queue list can contain entries where pqn->q is NULL (kernel queues where only pqn->kq is valid). In the original code: if (pqn->q) { ... mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type]; size = mqd_mgr->mqd_stride(...); } for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block mqd = q->mqd + size * xcc; r = mqd_mgr->debugfs_show_mqd(m, mqd); } When iterating over a queue node where pqn->q is NULL: 1. The if (pqn->q) block is skipped 2. mqd_mgr remains uninitialized (NULL from declaration) 3. The for loop executes anyway 4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode RIP: 0010:0x0 Call Trace: pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu] kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu] seq_read_iter+0x132/0x4b0 ... Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr and related variables are only used when properly initialized. (cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de) | ||||
| CVE-2026-89775 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation Computing the effects of a TLB invalidation involves looking at the size of the mapping cached by the TLB. For S1 mappings such as VNCR, this is deducted from the combination of the base granule size and the mapping level. However, this implies that the S1 MMU is *on*. When the MMU is off, we indicate this with the level being set to a "creative" value of -127 (S1_MMU_DISABLED). This ends-up being misinterpreted by pgshift_level_to_ttl() as it doesn't handle negative levels at all (the level is immediately cast to a u8 and only the bottom two bits considered), leading to an invalidation size of 0. Not helpful. Tidy-up pgshift_level_to_ttl() to handle these negative levels, and ttl_to_size() to always return SZ_1G when no valid TTL is present. This allows the removal of open-coded checks for similar situations. Note that the check for a negative value not explicitely checking for S1_MMU_DISABLED is deliberate, so that actual negative levels introduced with LVA2 and D128 can take the same path if we ever support them. | ||||
| CVE-2026-89795 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Allow per function PCI slots to fix slot reset on s390 On s390 systems, which use a machine level hypervisor, PCI devices are always accessed through a form of PCI pass-through which fundamentally operates on a per PCI function granularity. This is also reflected in the s390 PCI hotplug driver which creates hotplug slots for individual PCI functions. Its reset_slot() function, which is a wrapper for zpci_hot_reset_device(), thus also resets individual functions. Currently, the pci_create_slot() assigns the same pci_slot object to multifunction devices. This approach worked fine on s390 systems that only exposed virtual functions as individual PCI domains to the operating system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions") s390 supports exposing the topology of multifunction PCI devices by grouping them in a shared PCI domain. This creates a problem when resetting a function through the hotplug driver's slot_reset() interface. When attempting to reset a function through the hotplug driver, the shared slot assignment causes the wrong function to be reset instead of the intended one. It also leaks memory as we do create a pci_slot object for the function, but don't correctly free it in pci_slot_release(). Add a flag for struct pci_slot to allow per function PCI slots for functions managed through a hypervisor, which exposes individual PCI functions while retaining the topology. Since we can use all 8 bits for slot 'number' (for ARI devices), change slot 'number' u16 to account for special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. | ||||
| CVE-2026-89806 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation The framebuffer size calculation `fb_size = linebytes * height` can overflow when both values are large (e.g., 46341 * 46341 > INT_MAX). Since linebytes and height are both int types, the multiplication is performed as int * int, which results in undefined behavior on overflow. Use check_mul_overflow() to detect and prevent this overflow, consistent with the approach used in simpledrm.c and corebootdrm.c. | ||||
| CVE-2026-89789 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gtp: add synchronize_net() in gtp_newlink() error path to prevent use-after-free gtp_newlink()'s error path frees tid_hash and addr_hash without waiting for an RCU grace period after clearing sk_user_data. A concurrent gtp_encap_recv() in softirq may still hold the gtp_dev pointer obtained via rcu_dereference_sk_user_data() and access the freed memory. BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152) Call Trace: <IRQ> gtp0_pdp_find+0x1f6/0x200 gtp_encap_recv+0x527/0x24b0 udp_queue_rcv_one_skb+0x75f/0xc10 Add synchronize_net() before the kfree calls in out_hashtable, which covers all error paths from both gtp_encap_enable() and gtp_create_sockets(). | ||||
| CVE-2026-89815 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Drop tt->restore after successful restore ttm_pool_restore_and_alloc() can successfully complete the restore process via ttm_pool_restore_commit(), but tt->restore is not dropped afterward. As a result, subsequent backup/restore flows observe what appears to be a completed restore, while in reality shmem handles are still installed in tt->pages, leading to the stack trace below. Fix this by freeing and dropping tt->restore in ttm_pool_restore_and_alloc() upon successful completion of the restore. 20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490 20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206 20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000 20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000 20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000 20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000 20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001 20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000 20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0 20556 [ 309.871678] PKRU: 55555558 20557 [ 309.874403] Call Trace: 20558 [ 309.876866] <TASK> 20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100 20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm] 20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe] 20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe] 20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe] 20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm] 20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm] 20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe] 20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe] 20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm] 20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec] 20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe] 20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe] 20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm] 20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe] 20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe] 20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0 20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe] 20577 [ 309.962449] ? __wake_up_common+0x73/0xa0 20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe] 20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100 20580 [ 309.975209] drm_ioctl+0x213/0x440 20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe] 20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe] 20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 | ||||
| CVE-2026-89793 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: clear VM_MAYWRITE on read-only ublk char device mmap ublk_ch_mmap() rejects mmap requests with VM_WRITE set, but never clears VM_MAYWRITE on the resulting read-only mapping. This allows a userspace daemon to mmap the per-queue command buffer PROT_READ, then upgrade it to PROT_WRITE via mprotect(), since VM_MAYWRITE was never cleared. The command buffer holds struct ublksrv_io_desc entries that are kernel-written ABI; a writable mapping lets an unprivileged daemon process corrupt fields such as addr, op_flags, nr_sectors, and start_sector. Same bug class as the drm/panthor and drm/vc4 VM_MAYWRITE fixes, and the 2026-08-13 ptp/vmclock fix (a5edadbae57e). Verified via mprotect() PoC: before the fix, a PROT_READ mapping can be upgraded to PROT_READ|PROT_WRITE and a write into the command buffer corrupts io_desc fields (confirmed under KASAN). After the fix, mprotect() returns -EACCES. | ||||