Export limit exceeded: 384355 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384355 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-81836 | 2 Roocode, Roocodeinc | 2 Roo-code, Roo-code | 2026-08-28 | 3.7 Low |
| A vulnerability was detected in RooCodeInc Roo-Code up to 3.51.1. This vulnerability affects unknown code of the file src/integrations/claude-code/oauth.ts of the component OAuth Callback. The manipulation results in cleartext transmission of sensitive information. The attack may be performed from remote. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit is now public and may be used. Multiple isses were reported to the vendor beforehand. They explain, that "they all apply to Roo Code, a project we no longer support - the repository was archived a while ago, and we don't encourage anyone to use it." This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-80670 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf tools: Use perf_env__get_cpu_topology() in machine__resolve() machine__resolve() accesses env->cpu[al->cpu].socket_id after checking al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu against env->nr_cpus_avail. Since al->cpu comes from the untrusted perf.data sample, a crafted file with a large CPU index causes an out-of-bounds heap read. Use perf_env__get_cpu_topology() which validates both NULL and bounds. Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t): without this, values like 65536 silently truncate to 0, bypassing the accessor's internal check and returning CPU 0's topology. | ||||
| CVE-2026-80686 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE pte_pfn() and pte_dirty() have undefined behaviour when called on a non-present PTE. In migrate_vma_collect_pmd(), these functions may be invoked on non-present entries (e.g., device-private entries), leading to potential crashes from pte_pfn() or incorrect dirty folio accounting from pte_dirty(). Fix both by guarding with pte_present() checks. | ||||
| CVE-2026-80687 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommufd/viommu: Release the igroup lock on the vdevice_size error path iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the driver's vdevice_size against the core structure size with a WARN_ON_ONCE. On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it skips the mutex_unlock(), leaving the igroup lock held and deadlocking the next vDEVICE operation on that group. Jump to out_unlock_igroup instead. | ||||
| CVE-2026-80609 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix out-of-bounds check for cqe->len_list[] Move index check before element access. | ||||
| CVE-2026-37003 | 1 Agno | 1 Agno | 2026-08-28 | N/A |
| Agno up to and including 2.5.8 is vulnerable to Remote Code Execution (RCE) via prompt injection. The PythonTools and ShellTools components pass unsanitized, LLM-generated arguments directly to execution sinks including exec(), runpy.run_path(), and subprocess.run(). An unauthenticated attacker can exploit this by embedding malicious instructions in content processed by the agent (such as web pages or documents), allowing for arbitrary code and OS command execution on the host server. | ||||
| CVE-2026-37198 | 1 Open5gs | 1 Open5gs | 2026-08-28 | N/A |
| An integer overflow in the SMF component of Open5GS v2.7.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted GTP packet. | ||||
| CVE-2026-38343 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-28 | 5.5 Medium |
| An integer overflow in the libavfilter/vf_scale.c component of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted video file. | ||||
| CVE-2026-80553 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Cancel existing workqueues The initialization of the io_work and crw_work workqueues begs the question of whether they should be un-initialized. Add the corresponding cleanup tags in _release_dev to ensure work isn't dispatched after the private struct is free'd. | ||||
| CVE-2026-80556 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition In atmci_probe, &host->bh_work is bound with atmci_work_func, and atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all queue this work on system_bh_wq. If we remove the module, atmci_remove makes cleanup and the memory allocated for host with devm_kzalloc() is released after the remove callback returns, while the work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | atmci_interrupt | queue_work(system_bh_wq, | &host->bh_work) atmci_remove | atmci_cleanup_slot(...) | atmci_writel(host, ATMCI_IDR, ~0UL) | timer_delete_sync(&host->timer) | dma_release_channel(host->dma.chan) | free_irq(platform_get_irq(pdev, 0), host) | | atmci_work_func | // use host // devm resources released after | // remove returns, host is freed | | // use host (use-after-free) Fix it by canceling the work after all the sources that can schedule it (IRQ handler, timeout timer and DMA completion callback) have been stopped, and before proceeding with the remaining cleanup in atmci_remove. | ||||
| CVE-2026-80557 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix OOB read in decode_watchers() via missing bounds check ceph_start_decoding() validates that struct_len bytes remain in the buffer after the encoding header, but accepts struct_len=0 as valid: ceph_decode_need(p, end, 0, bad) always passes. When a malicious or compromised OSD sends an obj_list_watch_response_t reply with struct_len=0, ceph_start_decoding() returns success with p == end, leaving zero bytes guaranteed for subsequent reads. The immediately following ceph_decode_32(p) in decode_watchers() has no preceding bounds check. With p == end this is a 4-byte read past the validated buffer boundary. The garbage value is then passed directly to kzalloc_objs() as the watcher count. The sibling function decode_watcher() already uses the safe variants (ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32) after its own ceph_start_decoding() call. decode_watchers() is the only site that uses the bare variant, confirming an oversight. Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end, *num_watchers, bad), consistent with the established pattern. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment (e.g. cloud) can trigger this against any kernel client that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges beyond OSD session establishment. [ idryomov: trim changelog ] | ||||
| CVE-2026-80558 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Avoid using invalid osd indices from primary_temp A corrupted osdmap received from a Ceph monitor or OSD may contain osd indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts that don't exist, i.e., that are greater than max_osd or smaller than CEPH_HOMELESS_OSD (-1). These indices are used to create the up and acting set in ceph_pg_to_up_acting_osds(), called from calc_target(). While most of these osd indices are checked, the one from primary_temp is not. Subsequently, this may lead to calc_target() returning this (potentially invalid) index as target osd for a (linger) request. Because the osd_state, osd_weight, and osd_addr arrays only contain max_osd entries (with indices 0 to max_osd -1), this leads to out-of-bounds accesses when trying to read values from these arrays. This patch fixes the issue by adding a check to get_temp_osds(), so that only valid osd indices from primary_temp are used, and it falls back to using the primary from pg_temp or the up set if it is invalid. [ idryomov: changelog ] | ||||
| CVE-2026-80647 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18 | ||||
| CVE-2026-80560 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: signal: do not restore privileged SR bits on sigreturn restore_sigcontext() copies the whole supervision register (SR) from the signal frame and only clears SPR_SR_SM before the value is reloaded into the hardware SR (through ESR and l.rfe) on the return to user space. All other SR bits are left under user control. An unprivileged task can thus return from a signal handler through a crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the CPU performs no translation or protection on data accesses, so the task gains read and write access to arbitrary physical memory, a local privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH and the cache-enable bits are exposed the same way. The ptrace GPR regset already refuses any change to SR for exactly this reason. Restore only the arithmetic flag bits (F, CY, OV) from the signal frame and take every privileged control bit from the SR the kernel saved on signal entry. Verified with qemu-system-or1k -M or1k-sim: before this change an unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the same PoC receives SIGSEGV and physical memory is unchanged. | ||||
| CVE-2026-30046 | 1 Open5gs | 1 Open5gs | 2026-08-28 | 7.5 High |
| A reachable assertion vulnerability in the NUDM-UECM interface of Open5GS v2.7.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted DELETE request. | ||||
| CVE-2026-38348 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-28 | 5.5 Medium |
| An integer overflow in the libswscale/utils.c component of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted image file. | ||||
| CVE-2026-74744 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. | ||||
| CVE-2026-81835 | 2 Roocode, Roocodeinc | 2 Roo-code, Roo-code | 2026-08-28 | 5.5 Medium |
| A security vulnerability has been detected in RooCodeInc Roo-Code up to 3.51.1. This affects the function fetch_instructions of the file malicious_mcp_server.py of the component MCP Integration Trust Model. The manipulation leads to code injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Multiple isses were reported to the vendor beforehand. They explain, that "they all apply to Roo Code, a project we no longer support - the repository was archived a while ago, and we don't encourage anyone to use it." This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-15798 | 2 Nextendweb, Wordpress | 2 Smart Slider 3, Wordpress | 2026-08-28 | 6.4 Medium |
| The Smart Slider 3 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'slider' Block Attribute in all versions up to, and including, 3.5.1.38 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected scripts execute specifically when a user opens the affected post in the WordPress block editor, making Editors and Administrators the primary targets. | ||||
| CVE-2026-59284 | 2026-08-28 | 6.6 Medium | ||
| There is no allow list for property keys when Spring Cloud Commons writable /actuator/env is enabled. Spring Cloud Commons 5.0.0 - 5.0.2 Spring Cloud Commons 4.3.0 - 4.3.3 Spring Cloud Commons 4.0.0 - 4.2.6 Spring Cloud Commons 3.1.10 and earlier | ||||