Export limit exceeded: 20133 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20133 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40108 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped. | ||||
| CVE-2025-40109 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rng - Ensure set_ent is always present Ensure that set_ent is always set since only drbg provides it. | ||||
| CVE-2025-40111 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix Use-after-free in validation Nodes stored in the validation duplicates hashtable come from an arena allocator that is cleared at the end of vmw_execbuf_process. All nodes are expected to be cleared in vmw_validation_drop_ht but this node escaped because its resource was destroyed prematurely. | ||||
| CVE-2025-40112 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations and a broken epilogue in the exception handlers. This will prevent crashes and ensure correct return values of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-40115 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-40119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential null deref in ext4_mb_init() In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy() lacks null pointer checking, this leads to a null pointer dereference. ================================================================== EXT4-fs: no memory for groupinfo slab cache BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP PTI CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none) RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40 Call Trace: <TASK> xa_destroy+0x61/0x130 ext4_mb_init+0x483/0x540 __ext4_fill_super+0x116d/0x17b0 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 do_new_mount+0x197/0x300 __x64_sys_mount+0x116/0x150 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy() to prevent this issue. The same fix is also applied to ext4_mb_largest_free_orders_destroy(). | ||||
| CVE-2025-40121 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping When an invalid value is passed via quirk option, currently bytcr_rt5640 driver just ignores and leaves as is, which may lead to unepxected results like OOB access. This patch adds the sanity check and corrects the input mapping to the certain default value if an invalid value is passed. | ||||
| CVE-2025-40124 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III Anthony Yznaga tracked down that a BUG_ON in ext4 code with large folios enabled resulted from copy_from_user() returning impossibly large values greater than the size to be copied. This lead to __copy_from_iter() returning impossible values instead of the actual number of bytes it was able to copy. The BUG_ON has been reported in https://lore.kernel.org/r/b14f55642207e63e907965e209f6323a0df6dcee.camel@physik.fu-berlin.de The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. The exception handlers expect that %o2 has already been masked during the bulk copy loop, but the masking was performed after that loop. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-40122 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error When running perf_fuzzer on PTL, sometimes the below "unchecked MSR access error" is seen when accessing IA32_PMC_x_CFG_B MSRs. [ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30) [ 55.611280] Call Trace: [ 55.611282] <TASK> [ 55.611284] ? intel_pmu_config_acr+0x87/0x160 [ 55.611289] intel_pmu_enable_acr+0x6d/0x80 [ 55.611291] intel_pmu_enable_event+0xce/0x460 [ 55.611293] x86_pmu_start+0x78/0xb0 [ 55.611297] x86_pmu_enable+0x218/0x3a0 [ 55.611300] ? x86_pmu_enable+0x121/0x3a0 [ 55.611302] perf_pmu_enable+0x40/0x50 [ 55.611307] ctx_resched+0x19d/0x220 [ 55.611309] __perf_install_in_context+0x284/0x2f0 [ 55.611311] ? __pfx_remote_function+0x10/0x10 [ 55.611314] remote_function+0x52/0x70 [ 55.611317] ? __pfx_remote_function+0x10/0x10 [ 55.611319] generic_exec_single+0x84/0x150 [ 55.611323] smp_call_function_single+0xc5/0x1a0 [ 55.611326] ? __pfx_remote_function+0x10/0x10 [ 55.611329] perf_install_in_context+0xd1/0x1e0 [ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10 [ 55.611333] __do_sys_perf_event_open+0xa76/0x1040 [ 55.611336] __x64_sys_perf_event_open+0x26/0x30 [ 55.611337] x64_sys_call+0x1d8e/0x20c0 [ 55.611339] do_syscall_64+0x4f/0x120 [ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e On PTL, GP counter 0 and 1 doesn't support auto counter reload feature, thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR which requires to enable auto counter reload on GP counter 0. The root cause of causing this issue is the check for auto counter reload (ACR) counter mask from user space is incorrect in intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter mask from user space could be set into hw.config1 and then written into CFG_B MSRs and trigger the MSR access warning. e.g., User may create a perf event with ACR counter mask (config2=0xcb), and there is only 1 event created, so "cpuc->n_events" is 1. The correct check condition should be "i + idx >= cpuc->n_events" instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise, the counter mask would traverse twice and an invalid "cpuc->assign[1]" bit (bit 0) is set into hw.config1 and cause MSR accessing error. Besides, also check if the ACR counter mask corresponding events are ACR events. If not, filter out these counter mask. If a event is not a ACR event, it could be scheduled to an HW counter which doesn't support ACR. It's invalid to add their counter index in ACR counter mask. Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as user could set any invalid ACR counter mask and the warning message could mislead users. | ||||
| CVE-2025-40126 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-40129 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix null pointer dereference on zero-length checksum In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes checksum.data to be set to NULL. This triggers a NPD when accessing checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that the value of checksum.len is not less than XDR_UNIT. | ||||
| CVE-2025-40131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because rxcb->peer_id is not updated with a valid value. This is expected in monitor mode, where RX frames bypass the regular RX descriptor path that typically sets rxcb->peer_id. As a result, the peer is NULL, and link_id and link_valid fields in the RX status are not populated. This leads to a WARN_ON in mac80211 when it receives data frame from an associated station with invalid link_id. Fix this potential issue by using ppduinfo->peer_id, which holds the correct peer id for the received frame. This ensures that the peer is correctly found and the associated link metadata is updated accordingly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-40132 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback In create_sdw_dailink() check that sof_end->codec_info->add_sidecar is not NULL before calling it. The original code assumed that if include_sidecar is true, the codec on that link has an add_sidecar callback. But there could be other codecs on the same link that do not have an add_sidecar callback. | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2025-40139 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smc: Use __sk_dst_get() and dst_dev_rcu() in in smc_clc_prfx_set(). smc_clc_prfx_set() is called during connect() and not under RCU nor RTNL. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dev_dst_rcu() under rcu_read_lock() after kernel_getsockname(). Note that the returned value of smc_clc_prfx_set() is not used in the caller. While at it, we change the 1st arg of smc_clc_prfx_set[46]_rcu() not to touch dst there. | ||||
| CVE-2025-40145 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure When devm_add_action_or_reset() fails, it calls the passed cleanup function. Hence the caller must not repeat that cleanup. Replace the "goto err_regulator_free" by the actual freeing, as there will never be a need again for a second user of this label. | ||||
| CVE-2025-40138 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid NULL pointer dereference in f2fs_check_quota_consistency() syzbot reported a f2fs bug as below: Oops: gen[ 107.736417][ T5848] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 5848 Comm: syz-executor263 Tainted: G W 6.17.0-rc1-syzkaller-00014-g0e39a731820a #0 PREEMPT_{RT,(full)} RIP: 0010:strcmp+0x3c/0xc0 lib/string.c:284 Call Trace: <TASK> f2fs_check_quota_consistency fs/f2fs/super.c:1188 [inline] f2fs_check_opt_consistency+0x1378/0x2c10 fs/f2fs/super.c:1436 __f2fs_remount fs/f2fs/super.c:2653 [inline] f2fs_reconfigure+0x482/0x1770 fs/f2fs/super.c:5297 reconfigure_super+0x224/0x890 fs/super.c:1077 do_remount fs/namespace.c:3314 [inline] path_mount+0xd18/0xfe0 fs/namespace.c:4112 do_mount fs/namespace.c:4133 [inline] __do_sys_mount fs/namespace.c:4344 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4321 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The direct reason is f2fs_check_quota_consistency() may suffer null-ptr-deref issue in strcmp(). The bug can be reproduced w/ below scripts: mkfs.f2fs -f /dev/vdb mount -t f2fs -o usrquota /dev/vdb /mnt/f2fs quotacheck -uc /mnt/f2fs/ umount /mnt/f2fs mount -t f2fs -o usrjquota=aquota.user,jqfmt=vfsold /dev/vdb /mnt/f2fs mount -t f2fs -o remount,usrjquota=,jqfmt=vfsold /dev/vdb /mnt/f2fs umount /mnt/f2fs So, before old_qname and new_qname comparison, we need to check whether they are all valid pointers, fix it. | ||||
| CVE-2025-40165 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: m2m: Fix streaming cleanup on release If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty #258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. | ||||
| CVE-2025-40226 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Account for failed debug initialization When the SCMI debug subsystem fails to initialize, the related debug root will be missing, and the underlying descriptor will be NULL. Handle this fault condition in the SCMI debug helpers that maintain metrics counters. | ||||
| CVE-2025-40175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. | ||||