Export limit exceeded: 364053 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 20087 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20087 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40335 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq input args This will help on validating the userq input args, and rejecting for the invalid userq request at the IOCTLs first place. | ||||
| CVE-2025-40324 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix crash in nfsd4_read_release() When tracing is enabled, the trace_nfsd_read_done trace point crashes during the pynfs read.testNoFh test. | ||||
| CVE-2025-40302 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: videobuf2: forbid remove_bufs when legacy fileio is active vb2_ioctl_remove_bufs() call manipulates queue internal buffer list, potentially overwriting some pointers used by the legacy fileio access mode. Forbid that ioctl when fileio is active to protect internal queue state between subsequent read/write calls. | ||||
| CVE-2025-40298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. | ||||
| CVE-2025-40296 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Fix double free of GPIO device during unregister regulator_unregister() already frees the associated GPIO device. On ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to random failures when other drivers (typically Intel THC) attempt to allocate interrupts. The root cause is that the reference count of the pinctrl_intel_platform module unexpectedly drops to zero when this driver defers its probe. This behavior can also be reproduced by unloading the module directly. Fix the issue by removing the redundant release of the GPIO device during regulator unregistration. | ||||
| CVE-2025-40295 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT When simulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, an error trace appears during partition table reading at boot time. The issue is caused by inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left shift of -1 and triggering a UBSAN warning. [ 2.697306] ------------[ cut here ]------------ [ 2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37 [ 2.697311] shift exponent -1 is negative [ 2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary) [ 2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 2.697320] Call Trace: [ 2.697324] <TASK> [ 2.697325] dump_stack_lvl+0x76/0xa0 [ 2.697340] dump_stack+0x10/0x20 [ 2.697342] __ubsan_handle_shift_out_of_bounds+0x1e3/0x390 [ 2.697351] bh_get_inode_and_lblk_num.cold+0x12/0x94 [ 2.697359] fscrypt_set_bio_crypt_ctx_bh+0x44/0x90 [ 2.697365] submit_bh_wbc+0xb6/0x190 [ 2.697370] block_read_full_folio+0x194/0x270 [ 2.697371] ? __pfx_blkdev_get_block+0x10/0x10 [ 2.697375] ? __pfx_blkdev_read_folio+0x10/0x10 [ 2.697377] blkdev_read_folio+0x18/0x30 [ 2.697379] filemap_read_folio+0x40/0xe0 [ 2.697382] filemap_get_pages+0x5ef/0x7a0 [ 2.697385] ? mmap_region+0x63/0xd0 [ 2.697389] filemap_read+0x11d/0x520 [ 2.697392] blkdev_read_iter+0x7c/0x180 [ 2.697393] vfs_read+0x261/0x390 [ 2.697397] ksys_read+0x71/0xf0 [ 2.697398] __x64_sys_read+0x19/0x30 [ 2.697399] x64_sys_call+0x1e88/0x26a0 [ 2.697405] do_syscall_64+0x80/0x670 [ 2.697410] ? __x64_sys_newfstat+0x15/0x20 [ 2.697414] ? x64_sys_call+0x204a/0x26a0 [ 2.697415] ? do_syscall_64+0xb8/0x670 [ 2.697417] ? irqentry_exit_to_user_mode+0x2e/0x2a0 [ 2.697420] ? irqentry_exit+0x43/0x50 [ 2.697421] ? exc_page_fault+0x90/0x1b0 [ 2.697422] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.697425] RIP: 0033:0x75054cba4a06 [ 2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 [ 2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000 [ 2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06 [ 2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b [ 2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000 [ 2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0 [ 2.697436] </TASK> [ 2.697436] ---[ end trace ]--- This situation can happen for block devices because when CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size is 64 KiB. set_init_blocksize() then sets the block device inode->i_blkbits to 13, which is within this limit. File I/O does not trigger this problem because for filesystems that do not support the FS_LBS feature, sb_set_blocksize() prevents sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not hit the left-shift underflow issue. [EB: use folio_pos() and consolidate the two shifts by i_blkbits] | ||||
| CVE-2025-40291 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix regbuf vector size truncation There is a report of io_estimate_bvec_size() truncating the calculated number of segments that leads to corruption issues. Check it doesn't overflow "int"s used later. Rough but simple, can be improved on top. | ||||
| CVE-2025-40290 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: avoid data corruption on cq descriptor number Since commit 30f241fcf52a ("xsk: Fix immature cq descriptor production"), the descriptor number is stored in skb control block and xsk_cq_submit_addr_locked() relies on it to put the umem addrs onto pool's completion queue. skb control block shouldn't be used for this purpose as after transmit xsk doesn't have control over it and other subsystems could use it. This leads to the following kernel panic due to a NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 1 PID: 927 Comm: p4xsk.bin Not tainted 6.16.12+deb14-cloud-amd64 #1 PREEMPT(lazy) Debian 6.16.12-1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:xsk_destruct_skb+0xd0/0x180 [...] Call Trace: <IRQ> ? napi_complete_done+0x7a/0x1a0 ip_rcv_core+0x1bb/0x340 ip_rcv+0x30/0x1f0 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x87/0x130 __napi_poll+0x28/0x180 net_rx_action+0x339/0x420 handle_softirqs+0xdc/0x320 ? handle_edge_irq+0x90/0x1e0 do_softirq.part.0+0x3b/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x60/0x70 __dev_direct_xmit+0x14e/0x1f0 __xsk_generic_xmit+0x482/0xb70 ? __remove_hrtimer+0x41/0xa0 ? __xsk_generic_xmit+0x51/0xb70 ? _raw_spin_unlock_irqrestore+0xe/0x40 xsk_sendmsg+0xda/0x1c0 __sys_sendto+0x1ee/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x84/0x2f0 ? __pfx_pollwake+0x10/0x10 ? __rseq_handle_notify_resume+0xad/0x4c0 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x204/0x2f0 ? do_syscall_64+0x204/0x2f0 ? do_syscall_64+0x204/0x2f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [...] Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x1c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Instead use the skb destructor_arg pointer along with pointer tagging. As pointers are always aligned to 8B, use the bottom bit to indicate whether this a single address or an allocated struct containing several addresses. | ||||
| CVE-2025-40287 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix improper check of dentry.stream.valid_size We found an infinite loop bug in the exFAT file system that can lead to a Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is malformed, the following system calls — SYS_openat, SYS_ftruncate, and SYS_pwrite64 — can cause the kernel to hang. Root cause analysis shows that the size validation code in exfat_find() does not check whether dentry.stream.valid_size is negative. As a result, the system calls mentioned above can succeed and eventually trigger the DoS issue. This patch adds a check for negative dentry.stream.valid_size to prevent this vulnerability. | ||||
| CVE-2025-40286 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix possible memory leak in smb2_read() Memory leak occurs when ksmbd_vfs_read() fails. Fix this by adding the missing kvfree(). | ||||
| CVE-2025-40285 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix possible refcount leak in smb2_sess_setup() Reference count of ksmbd_session will leak when session need reconnect. Fix this by adding the missing ksmbd_user_session_put(). | ||||
| CVE-2025-40284 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT timers. Should fix the BUG: sporadically seen by BlueZ test bot (in "Mesh - Send cancel - 1" test). Log: ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0 vhci_release+0x18b/0x240 ------ | ||||
| CVE-2025-40283 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: reorder cleanup in btusb_disconnect to avoid UAF There is a KASAN: slab-use-after-free read in btusb_disconnect(). Calling "usb_driver_release_interface(&btusb_driver, data->intf)" will free the btusb data associated with the interface. The same data is then used later in the function, hence the UAF. Fix by moving the accesses to btusb data to before the data is free'd. | ||||
| CVE-2025-40279 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: act_connmark: initialize struct tc_ife to fix kernel leak In tcf_connmark_dump(), the variable 'opt' was partially initialized using a designatied initializer. While the padding bytes are reamined uninitialized. nla_put() copies the entire structure into a netlink message, these uninitialized bytes leaked to userspace. Initialize the structure with memset before assigning its fields to ensure all members and padding are cleared prior to beign copied. | ||||
| CVE-2025-68326 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix stack_depot usage Add missing stack_depot_init() call when CONFIG_DRM_XE_DEBUG_GUC is enabled to fix the following call stack: [] BUG: kernel NULL pointer dereference, address: 0000000000000000 [] Workqueue: drm_sched_run_job_work [gpu_sched] [] RIP: 0010:stack_depot_save_flags+0x172/0x870 [] Call Trace: [] <TASK> [] fast_req_track+0x58/0xb0 [xe] (cherry picked from commit 64fdf496a6929a0a194387d2bb5efaf5da2b542f) | ||||
| CVE-2025-40313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: pretend $Extend records as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. | ||||
| CVE-2025-40267 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: ensure allocated iovec gets cleared for early failure A previous commit reused the recyling infrastructure for early cleanup, but this is not enough for the case where our internal caches have overflowed. If this happens, then the allocated iovec can get leaked if the request is also aborted early. Reinstate the previous forced free of the iovec for that situation. | ||||
| CVE-2025-40265 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfat: fix missing sb_min_blocksize() return value checks When emulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, but without format, a kernel panic was triggered during the early boot stage while attempting to mount a vfat filesystem. [95553.682035] EXT4-fs (nvme0n1): unable to set blocksize [95553.684326] EXT4-fs (nvme0n1): unable to set blocksize [95553.686501] EXT4-fs (nvme0n1): unable to set blocksize [95553.696448] ISOFS: unsupported/invalid hardware sector size 8192 [95553.697117] ------------[ cut here ]------------ [95553.697567] kernel BUG at fs/buffer.c:1582! [95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI [95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary) [95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0 [95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f [95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246 [95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001 [95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000 [95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000 [95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000 [95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000 [95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0 [95553.708439] PKRU: 55555554 [95553.708734] Call Trace: [95553.709015] <TASK> [95553.709266] __getblk_slow+0xd2/0x230 [95553.709641] ? find_get_block_common+0x8b/0x530 [95553.710084] bdev_getblk+0x77/0xa0 [95553.710449] __bread_gfp+0x22/0x140 [95553.710810] fat_fill_super+0x23a/0xfc0 [95553.711216] ? __pfx_setup+0x10/0x10 [95553.711580] ? __pfx_vfat_fill_super+0x10/0x10 [95553.712014] vfat_fill_super+0x15/0x30 [95553.712401] get_tree_bdev_flags+0x141/0x1e0 [95553.712817] get_tree_bdev+0x10/0x20 [95553.713177] vfat_get_tree+0x15/0x20 [95553.713550] vfs_get_tree+0x2a/0x100 [95553.713910] vfs_cmd_create+0x62/0xf0 [95553.714273] __do_sys_fsconfig+0x4e7/0x660 [95553.714669] __x64_sys_fsconfig+0x20/0x40 [95553.715062] x64_sys_call+0x21ee/0x26a0 [95553.715453] do_syscall_64+0x80/0x670 [95553.715816] ? __fs_parse+0x65/0x1e0 [95553.716172] ? fat_parse_param+0x103/0x4b0 [95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0 [95553.717034] ? __do_sys_fsconfig+0x3d9/0x660 [95553.717548] ? __x64_sys_fsconfig+0x20/0x40 [95553.717957] ? x64_sys_call+0x21ee/0x26a0 [95553.718360] ? do_syscall_64+0xb8/0x670 [95553.718734] ? __x64_sys_fsconfig+0x20/0x40 [95553.719141] ? x64_sys_call+0x21ee/0x26a0 [95553.719545] ? do_syscall_64+0xb8/0x670 [95553.719922] ? x64_sys_call+0x1405/0x26a0 [95553.720317] ? do_syscall_64+0xb8/0x670 [95553.720702] ? __x64_sys_close+0x3e/0x90 [95553.721080] ? x64_sys_call+0x1b5e/0x26a0 [95553.721478] ? do_syscall_64+0xb8/0x670 [95553.721841] ? irqentry_exit+0x43/0x50 [95553.722211] ? exc_page_fault+0x90/0x1b0 [95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e [95553.723166] RIP: 0033:0x72ee774f3afe [95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48 [95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [95553.725892] RAX: ffffffffffffffda RBX: ---truncated--- | ||||
| CVE-2025-68259 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn instruction, discard the exception and retry the instruction if the code stream is changed (e.g. by a different vCPU) between when the CPU executes the instruction and when KVM decodes the instruction to get the next RIP. As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction"), failure to verify that the correct INTn instruction was decoded can effectively clobber guest state due to decoding the wrong instruction and thus specifying the wrong next RIP. The bug most often manifests as "Oops: int3" panics on static branch checks in Linux guests. Enabling or disabling a static branch in Linux uses the kernel's "text poke" code patching mechanism. To modify code while other CPUs may be executing that code, Linux (temporarily) replaces the first byte of the original instruction with an int3 (opcode 0xcc), then patches in the new code stream except for the first byte, and finally replaces the int3 with the first byte of the new code stream. If a CPU hits the int3, i.e. executes the code while it's being modified, then the guest kernel must look up the RIP to determine how to handle the #BP, e.g. by emulating the new instruction. If the RIP is incorrect, then this lookup fails and the guest kernel panics. The bug reproduces almost instantly by hacking the guest kernel to repeatedly check a static branch[1] while running a drgn script[2] on the host to constantly swap out the memory containing the guest's TSS. [1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a [2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b | ||||
| CVE-2025-40256 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I missed the case where state creation fails between full initialization (->init_state has been called) and being inserted on the lists. In this situation, ->init_state has been called, so for IPcomp tunnels, the fallback tunnel has been created and added onto the lists, but the user state never gets added, because we fail before that. The user state doesn't go through __xfrm_state_delete, so we don't call xfrm_state_delete_tunnel for those states, and we end up leaking the FB tunnel. There are several codepaths affected by this: the add/update paths, in both net/key and xfrm, and the migrate code (xfrm_migrate, xfrm_state_migrate). A "proper" rollback of the init_state work would probably be doable in the add/update code, but for migrate it gets more complicated as multiple states may be involved. At some point, the new (not-inserted) state will be destroyed, so call xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states will have their fallback tunnel cleaned up during __xfrm_state_delete, which solves the issue that b441cf3f8c4b (and other patches before it) aimed at. All states (including FB tunnels) will be removed from the lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). | ||||