Export limit exceeded: 401115 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 401115 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401115 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93781 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Do not block on tag allocation in scsi_eh_lock_door() scsi_eh_lock_door() is called from scsi_restart_operations() while the host is still in the SHOST_RECOVERY state, i.e. before the host is switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the queues. It allocates a request via scsi_alloc_request() with no flags, so blk_mq_get_tag() may block waiting for a free sched tag when all tags are already in use. Those tags can be held by commands that were just requeued by scsi_eh_flush_done_q() during error handling. Such commands cannot be dispatched until the host leaves SHOST_RECOVERY and scsi_run_host_queues() is called - which only happens *after* scsi_eh_lock_door() returns. This forms a circular dependency: - scsi_eh_lock_door(), running in the SCSI error handler thread, waits for a sched tag held by a requeued command; - the requeued command cannot complete and release its sched tag until the error handler thread leaves scsi_restart_operations() and restart the queues. For devices with a single driver tag (e.g. USB storage) it is a guaranteed deadlock and I/O that can never be submitted. This problem has also been reproduced in our environment. Locking the door is a best-effort operation, and scsi_eh_lock_door() already returns silently when the request allocation fails. Pass BLK_MQ_REQ_NOWAIT to scsi_alloc_request() so the allocation fails instead of blocking when no tag is available. This breaks the circular dependency and allows the error handler to finish restarting the queues, after which the pending commands are dispatched normally. | ||||
| CVE-2026-93288 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which clears the logger pointer without an RCU grace period. Immediately after, ops_free_list() frees the per-net state while concurrent packets might still be executing nf_log_packet() under rcu_read_lock()." Clear the pointer via .pre_exit to make sure rcu readers have completed before pernet storage is free'd. The change in nf_log_syslog.c is only done for consistency: it doesn't use pernet data. | ||||
| CVE-2026-93287 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: reject oversized block transfers in the common path The SMBus block transfer length data->block[0] is validated in i2c_smbus_xfer_emulated() but that check runs too late for tracepoints and is skipped entirely when the adapter provides a native smbus_xfer implementation. This allows user-controlled oversized block lengths to reach tracepoint memcpy calls and driver callbacks unchecked. Add an early validation in __i2c_smbus_xfer() that rejects block transfers whose caller-supplied length is zero or exceeds I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback runs. data->block[0] is filled in by the device on SMBus block reads, so the check is scoped to operations where the length is actually supplied by the caller. This is consistent with the existing -EINVAL convention in the emulated path and protects all downstream consumers at once: the smbus_write tracepoint, all native smbus_xfer driver implementations, and the emulated path. Two distinct bugs are fixed by this change: Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h) trace_smbus_write() fires before any validation and copies data->block[0]+1 bytes into a 34-byte event buffer. With block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221. BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530 Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91 Call Trace: <TASK> __asan_memcpy+0x23/0x80 trace_event_raw_event_smbus_write+0x27c/0x530 __i2c_smbus_xfer+0x43a/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c) stub_xfer() implements .smbus_xfer directly and only clamps block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With block[0]=0xff and command=0 the loop accesses block[1+i] for i up to 254, far past the 34-byte union. UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44 index 34 is out of range for type '__u8 [34]' Call Trace: <TASK> __ubsan_handle_out_of_bounds+0xd7/0x120 stub_xfer+0x1971/0x198f [i2c_stub] __i2c_smbus_xfer+0x306/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN. | ||||
| CVE-2026-93286 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: appletalk: fix NULL pointer dereference in aarp_send_ddp() aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast path without checking for NULL. When the device has no AppleTalk interface configured (dev->atalk_ptr == NULL), this leads to a NULL pointer dereference at the at->s_net access. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:aarp_send_ddp (net/appletalk/aarp.c:552 (discriminator 2)) Call Trace: <TASK> atalk_sendmsg (net/appletalk/ddp.c:1715) __sys_sendto (net/socket.c:2265 (discriminator 1)) __x64_sys_sendto (net/socket.c:2272) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Add a NULL check consistent with the other callers of atalk_find_dev_addr(). | ||||
| CVE-2026-93285 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: embed f2fs_gc_kthread in f2fs_sb_info Instead of allocating f2fs_gc_kthread dynamically, embed it in f2fs_sb_info. This simplifies lifetime management and prepares for fixing race conditions during teardown. - __sbi_store - remount|shutdown - f2fs_stop_gc_thread - access sbi->gc_thread - sbi->gc_thread = NULL - access sbi->gc_thread->f2fs_gc_task | ||||
| CVE-2026-93284 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: dma-unmap pages before handling migration errors drm_pagemap_migrate_unmap_pages() relies on the pages array to determine which pages require DMA unmapping. However, drm_pagemap_migration_unlock_put_pages() clears the array as part of its cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page information if it is called afterward. Call drm_pagemap_migrate_unmap_pages() before drm_pagemap_migration_unlock_put_pages() so the pages array remains valid during DMA unmapping. | ||||
| CVE-2026-93244 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: simpledrm: Improve stride validation Validate the computed stride against the maximum value INT_MAX. | ||||
| CVE-2026-93231 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lockd: fix swapped arguments in nlmsvc_match_ip() When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip, nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server sockaddr as the opaque @data argument: nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL); The match callback is later invoked from nlm_traverse_locks() as: match(lockhost, host); where the first argument is the nlm_host that owns the lock, and the second argument is the @data that was originally passed down (here the server sockaddr). This is the convention every other match callback relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()): arg1 is the real nlm_host, arg2 is the caller-supplied reference value. nlmsvc_match_ip() has had these two arguments reversed ever since the unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd: unlock lockd locks associated with a given server ip"): return rpc_cmp_addr(nlm_srcaddr(host), datap); Here @host is actually the server sockaddr, so nlm_srcaddr(host) dereferences a struct sockaddr as a struct nlm_host and reads garbage at the offset of h_srcaddr; meanwhile @datap is actually the lock owner's nlm_host but is compared as a sockaddr. As a result the comparison practically never matches and locks are not released for the requested IP. Swap the arguments so the lock owner's source address is compared against the requested server address: return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host); [ cel: fix the misleading typedef parameter names too ] | ||||
| CVE-2026-93204 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: atomically update mac addresses When a MAC address is updated in batadv_dat_entry_add(), it is done using a simple copy function. A parallel reader might only see parts of this update. In worst case, the reader is transporting the half updated MAC address over the network or is creating an ARP response using it - poisoning the ARP cache. atomic64_t can be used to store the 48 bit of a mac address. A reader will then either see the old mac address or the new one - never a mixture of both. | ||||
| CVE-2026-93200 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix use-after-free of master->this sysfs attribute callbacks for the master controller device dereference master->this. However, master->this is freed in i3c_master_detach_free_devs() before the master device itself is released. As a result, sysfs accesses can dereference a freed master->this pointer, leading to a use-after-free. Keep master->this alive until i3c_masterdev_release(), which is called after the master device and its sysfs state are being torn down. Do not free master->this as part of the normal device detach path. On the error path in i3c_master_set_info(), reset master->this and bus.cur_master to NULL before freeing the allocated device. | ||||
| CVE-2026-93199 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Do not treat master device as a duplicate target i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C device with the same PID as the reference device. The search can match master->this, causing the controller itself to be returned as a duplicate. Since the controller is not a target device, it cannot be a duplicate of one. Exclude master->this from matching so that the function only returns real duplicate target devices. | ||||
| CVE-2026-93196 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: virtio_pmem: refcount requests for token lifetime KASAN reports slab-use-after-free in __wake_up_common(): BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160 Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x6d/0xb0 print_report+0x170/0x4e2 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __virt_addr_valid+0x1dc/0x380 kasan_report+0xbc/0xf0 ? __wake_up_common+0x114/0x160 ? __wake_up_common+0x114/0x160 __wake_up_common+0x114/0x160 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 __wake_up+0x36/0x60 virtio_pmem_host_ack+0x11d/0x3b0 ? sched_balance_domains+0x29f/0xb00 ? __pfx_virtio_pmem_host_ack+0x10/0x10 ? _raw_spin_lock_irqsave+0x98/0x100 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 vring_interrupt+0x1c9/0x5e0 ? __pfx_vp_interrupt+0x10/0x10 vp_vring_interrupt+0x87/0x100 ? __pfx_vp_interrupt+0x10/0x10 __handle_irq_event_percpu+0x17f/0x550 ? __pfx__raw_spin_lock+0x10/0x10 handle_irq_event+0xab/0x1c0 handle_fasteoi_irq+0x276/0xae0 __common_interrupt+0x65/0x130 common_interrupt+0x78/0xa0 </IRQ> virtio_pmem_host_ack() wakes a request that has already been freed by the submitter. This happens when the request token is still reachable via the virtqueue, but virtio_pmem_flush() returns and frees it. Fix the token lifetime by refcounting struct virtio_pmem_request. virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an extra reference once the request is queued. The completion path drops the virtqueue reference, and the submitter drops its reference before returning. | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||
| CVE-2026-90029 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls timer_delete() before the chip containing the timer is freed. The timer callback may still be running and can rearm itself, resulting in a use-after-free. Use timer_shutdown_sync() to wait for the callback and prevent further rearming. Do this unconditionally because ss_en may be changed after the timer is armed. Move timer_setup() into init_realtek_cr() so the timer is initialized before any failure path can invoke the destructor. Found by static analysis. | ||||
| CVE-2026-90023 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() Previously fsg_num_buffers_validate() was removed as it was not necessary due to Kconfig setting the limits for n from 2 to 256 with default as 2. However, setting the page content in such a way that kstrtou8() reflects n value as either 0 or 1 bypasses these restrictions leading to a null pointer dereference if n is 0. Fix this by adding a check for n < 2 and returning -EINVAL if n is either 0 or 1 consistent with Kconfig logic. | ||||
| CVE-2026-90016 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() rtw_restruct_wmm_ie() scans in_ie for a WMM IE with: while (i < in_len) { ... if (i + 5 < in_len && in_ie[i] == 0xDD && ...) { ... break; } i += (in_ie[i + 1] + 2); /* to the next IE element */ } When the "i + 5 < in_len" match check fails simply because i is within 5 bytes of the end of the buffer (i.e. no WMM IE was found near the tail of in_ie), execution falls through to "i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len - 1 at that point, this is a 1-byte out-of-bounds read of an attacker-influenced IE buffer built from association/scan data. Commit a75281626fc8f ("staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 < in_len" guard to the match condition itself, but did not add an equivalent guard before the fallthrough advance, so the same class of OOB read remained reachable through the non-matching path. Add an explicit bounds check before advancing to the next IE. | ||||
| CVE-2026-90013 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening options file The options files do not take the trace_array reference for the options they represent. This could cause a use-after-free kernel crash if one of these files is opened by one task and another task removes the instance that the option is for. Because it doesn't take a reference upon opening, it will not stop the removal which will free the options descriptor that is being used. As the options are somewhat dynamic in their creation at boot up, each file represents a flag in the trace_array. The trace_array has an array of indexes to represent each of these flags that is stored in the trace_flags_index array. The address of the index array element is used to pass to the inode->i_private pointer. Then that element is read which holds the index (which represents the flag) and then the index is used to calculate the trace_array descriptor from its trace_flags_index array. One issue is that the index element can not be referenced until the trace_array's reference is taken. To handle this, create a new helper function called: trace_array_options_get() that will iterate all the existing trace_arrays in the ftrace_trace_arrays list (under the trace_types_lock), and compare the passed in address of the index element with the entire array of the trace_array's trace_flags_index array. If it matches, then up the corresponding trace_array's reference and return. | ||||
| CVE-2026-90002 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Take trace_array reference before accessing its ftrace_ops The trace instance files set_ftrace_filter and set_ftrace_notrace was updated to work with specific trace instances (trace_arrays). The issue is that when these files are opened, there is a small race window where it will use the ftrace_ops from the inode->private pointer to get a reference to the trace_array and then take its reference. The problem is that the ftrace_ops itself could be freed. If the rmdir on the instance happens at the same time the set_ftrace_filter file is opened, the rmdir could have also freed the ftrace_ops and referencing it will cause a use-after-free bug and crash the kernel. Instead, pass in the trace_array as the file private data (NULL for the top level instance), and then pass both the trace_array and the ftrace_ops to the ftrace_regex_open() function. If the trace_array is NULL, then it just uses the ftrace_ops without the need to take its reference (like normal). If the ftrace_ops is NULL, that is only the case for the top level instance and the global_ops can be used. This allows the trace_array to have its reference incremented before touching the ftrace_ops that could also be freed when the instance is. | ||||
| CVE-2026-89996 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the caller's fd table via dma_buf_fd() -> fd_install() before dma_heap_ioctl() copies the result back to userspace. If the trailing copy_to_user() fails, userspace never learns the fd number, but the fd (and the underlying dma-buf reference) are already visible to other threads in the same process and are leaked for the lifetime of the process. The obvious "close it on the failure path" fix is unsafe: once fd_install() has run, another thread can already dup() the fd, send it via SCM_RIGHTS, or close() it and let its number be reused, so a subsequent close_fd() from the ioctl path can operate on an unrelated file. This was pointed out by Christian König on v1 [1]. Restructure the allocation path so that fd_install() is the last, unfailable step of a successful ioctl: 1. heap->ops->allocate() creates the dma_buf. 2. get_unused_fd_flags() reserves an fd number in the caller's fd table without publishing it, so no other thread can observe it. 3. copy_to_user() delivers the fd number to userspace; on failure the fd is returned with put_unused_fd() and the dma_buf reference is dropped with dma_buf_put(), leaving no user- visible state behind. 4. dma_buf_fd_install() publishes the fd and emits the trace_dma_buf_fd tracepoint -- from here on the ioctl cannot fail. A new dma_buf_fd_install() helper is introduced in dma-buf.c to wrap fd_install() together with the DMA_BUF_TRACE() call, preserving the export tracing that dma_buf_fd() provides. dma_heap_ioctl_allocate() is refactored to return the struct dma_buf * directly (returning ERR_PTR on failure) so the caller holds the dmabuf reference across steps 3 and 4. The failure at step 3 is easily reachable from userspace: pass a struct dma_heap_allocation_data that lives in a page whose protection is flipped to PROT_READ between copy_from_user() and copy_to_user() (e.g. via mprotect()). Before this change each such ioctl leaks one dmabuf fd; after it, the fd table is unchanged on failure and only /dev/dma_heap/<name> remains open. No UAPI or heap-driver interface change. [1] https://lore.kernel.org/dri-devel/175e98de-f414-47d7-81c1-c0fe0a8f7f62@amd.com/ | ||||
| CVE-2026-89972 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: add missing SRCU grace period in error path nvme_alloc_ns() error path at out_unlink_ns removes ns from the namespace head siblings list with list_del_rcu(&ns->siblings) but does not wait for SRCU readers before freeing the namespace struct. Multipath code iterates the head->list under srcu_read_lock() in nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent reader can still hold a reference to ns when kfree(ns) runs. The normal removal path in nvme_ns_remove() correctly calls synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for in-progress readers. Add the same grace period in the error path. | ||||