Export limit exceeded: 408314 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408314 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31546 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL deref in bond_debug_rlb_hash_show rlb_clear_slave intentionally keeps RLB hash-table entries on the rx_hashtbl_used_head list with slave set to NULL when no replacement slave is available. However, bond_debug_rlb_hash_show visites client_info->slave without checking if it's NULL. Other used-list iterators in bond_alb.c already handle this NULL-slave state safely: - rlb_update_client returns early on !client_info->slave - rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance compare slave values before visiting - lb_req_update_subnet_clients continues if slave is NULL The following NULL deref crash can be trigger in bond_debug_rlb_hash_show: [ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41) [ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286 [ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204 [ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078 [ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000 [ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0 [ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8 [ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000 [ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0 [ 1.295897] Call Trace: [ 1.296134] seq_read_iter (fs/seq_file.c:231) [ 1.296341] seq_read (fs/seq_file.c:164) [ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1)) [ 1.296658] vfs_read (fs/read_write.c:572) [ 1.296981] ksys_read (fs/read_write.c:717) [ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add a NULL check and print "(none)" for entries with no assigned slave. | ||||
| CVE-2026-31533 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption The -EBUSY handling in tls_do_encryption(), introduced by commit 859054147318 ("net: tls: handle backlogging of crypto requests"), has a use-after-free due to double cleanup of encrypt_pending and the scatterlist entry. When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to the cryptd backlog and the async callback tls_encrypt_done() will be invoked upon completion. That callback unconditionally restores the scatterlist entry (sge->offset, sge->length) and decrements ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an error, the synchronous error path in tls_do_encryption() performs the same cleanup again, double-decrementing encrypt_pending and double-restoring the scatterlist. The double-decrement corrupts the encrypt_pending sentinel (initialized to 1), making tls_encrypt_async_wait() permanently skip the wait for pending async callbacks. A subsequent sendmsg can then free the tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still pending, resulting in a use-after-free when the callback fires on the freed record. Fix this by skipping the synchronous cleanup when the -EBUSY async wait returns an error, since the callback has already handled encrypt_pending and sge restoration. | ||||
| CVE-2026-31532 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: raw: fix ro->uniq use-after-free in raw_rcv() raw_release() unregisters raw CAN receive filters via can_rx_unregister(), but receiver deletion is deferred with call_rcu(). This leaves a window where raw_rcv() may still be running in an RCU read-side critical section after raw_release() frees ro->uniq, leading to a use-after-free of the percpu uniq storage. Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific socket destructor. can_rx_unregister() takes an extra reference to the socket and only drops it from the RCU callback, so freeing uniq from sk_destruct ensures the percpu area is not released until the relevant callbacks have drained. [mkl: applied manually] | ||||
| CVE-2026-31521 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: module: Fix kernel panic when a symbol st_shndx is out of bounds The module loader doesn't check for bounds of the ELF section index in simplify_symbols(): for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) { const char *name = info->strtab + sym[i].st_name; switch (sym[i].st_shndx) { case SHN_COMMON: [...] default: /* Divert to percpu allocation if a percpu var. */ if (sym[i].st_shndx == info->index.pcpu) secbase = (unsigned long)mod_percpu(mod); else /** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr; sym[i].st_value += secbase; break; } } A symbol with an out-of-bounds st_shndx value, for example 0xffff (known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic: BUG: unable to handle page fault for address: ... RIP: 0010:simplify_symbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exception This can happen when module ELF is legitimately using SHN_XINDEX or when it is corrupted. Add a bounds check in simplify_symbols() to validate that st_shndx is within the valid range before using it. This issue was discovered due to a bug in llvm-objcopy, see relevant discussion for details [1]. [1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/ | ||||
| CVE-2026-31518 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: esp: fix skb leak with espintcp and async crypto When the TX queue for espintcp is full, esp_output_tail_tcp will return an error and not free the skb, because with synchronous crypto, the common xfrm output code will drop the packet for us. With async crypto (esp_output_done), we need to drop the skb when esp_output_tail_tcp returns an error. | ||||
| CVE-2026-31515 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_key: validate families in pfkey_send_migrate() syzbot was able to trigger a crash in skb_put() [1] Issue is that pfkey_send_migrate() does not check old/new families, and that set_ipsecrequest() @family argument was truncated, thus possibly overfilling the skb. Validate families early, do not wait set_ipsecrequest(). [1] skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL> kernel BUG at net/core/skbuff.c:214 ! Call Trace: <TASK> skb_over_panic net/core/skbuff.c:219 [inline] skb_put+0x159/0x210 net/core/skbuff.c:2655 skb_put_zero include/linux/skbuff.h:2788 [inline] set_ipsecrequest net/key/af_key.c:3532 [inline] pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636 km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848 xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705 xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150 | ||||
| CVE-2026-31508 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Avoid releasing netdev before teardown completes The patch cited in the Fixes tag below changed the teardown code for OVS ports to no longer unconditionally take the RTNL. After this change, the netdev_destroy() callback can proceed immediately to the call_rcu() invocation if the IFF_OVS_DATAPATH flag is already cleared on the netdev. The ovs_netdev_detach_dev() function clears the flag before completing the unregistration, and if it gets preempted after clearing the flag (as can happen on an -rt kernel), netdev_destroy() can complete and the device can be freed before the unregistration completes. This leads to a splat like: [ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI [ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT [ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025 [ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0 [ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90 [ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246 [ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000 [ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05 [ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000 [ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006 [ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000 [ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000 [ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0 [ 998.393944] PKRU: 55555554 [ 998.393946] Call Trace: [ 998.393949] <TASK> [ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch] [ 998.394009] ? __die_body.cold+0x8/0x12 [ 998.394016] ? die_addr+0x3c/0x60 [ 998.394027] ? exc_general_protection+0x16d/0x390 [ 998.394042] ? asm_exc_general_protection+0x26/0x30 [ 998.394058] ? dev_set_promiscuity+0x8d/0xa0 [ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch] [ 998.394092] dp_device_event+0x41/0x80 [openvswitch] [ 998.394102] notifier_call_chain+0x5a/0xd0 [ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60 [ 998.394110] rtnl_dellink+0x169/0x3e0 [ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0 [ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0 [ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0 [ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 998.394132] netlink_rcv_skb+0x50/0x100 [ 998.394138] netlink_unicast+0x292/0x3f0 [ 998.394141] netlink_sendmsg+0x21b/0x470 [ 998.394145] ____sys_sendmsg+0x39d/0x3d0 [ 998.394149] ___sys_sendmsg+0x9a/0xe0 [ 998.394156] __sys_sendmsg+0x7a/0xd0 [ 998.394160] do_syscall_64+0x7f/0x170 [ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 998.394165] RIP: 0033:0x7fad61bf4724 [ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 [ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724 [ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003 [ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f [ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2 ---truncated--- | ||||
| CVE-2026-31507 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores the pointer in pipe_buffer.private. The pipe_buf_operations for these buffers used .get = generic_pipe_buf_get, which only increments the page reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv pointer itself was not handled, so after tee() both the original and the cloned pipe_buffer share the same smc_spd_priv *. When both pipes are subsequently released, smc_rx_pipe_buf_release() is called twice against the same object: 1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct] 2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF] KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which then escalates to a NULL-pointer dereference and kernel panic via smc_rx_update_consumer() when it chases the freed priv->smc pointer: BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0 Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x650 kasan_report+0xc6/0x100 smc_rx_pipe_buf_release+0x78/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> BUG: kernel NULL pointer dereference, address: 0000000000000020 RIP: 0010:smc_rx_update_consumer+0x8d/0x350 Call Trace: <TASK> smc_rx_pipe_buf_release+0x121/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Kernel panic - not syncing: Fatal exception Beyond the memory-safety problem, duplicating an SMC splice buffer is semantically questionable: smc_rx_update_cons() would advance the consumer cursor twice for the same data, corrupting receive-window accounting. A refcount on smc_spd_priv could fix the double-free, but the cursor-accounting issue would still need to be addressed separately. The .get callback is invoked by both tee(2) and splice_pipe_to_pipe() for partial transfers; both will now return -EFAULT. Users who need to duplicate SMC socket data must use a copy-based read path. | ||||
| CVE-2026-31504 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617. | ||||
| CVE-2026-31503 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udp: Fix wildcard bind conflict check when using hash2 When binding a udp_sock to a local address and port, UDP uses two hashes (udptable->hash and udptable->hash2) for collision detection. The current code switches to "hash2" when hslot->count > 10. "hash2" is keyed by local address and local port. "hash" is keyed by local port only. The issue can be shown in the following bind sequence (pseudo code): bind(fd1, "[fd00::1]:8888") bind(fd2, "[fd00::2]:8888") bind(fd3, "[fd00::3]:8888") bind(fd4, "[fd00::4]:8888") bind(fd5, "[fd00::5]:8888") bind(fd6, "[fd00::6]:8888") bind(fd7, "[fd00::7]:8888") bind(fd8, "[fd00::8]:8888") bind(fd9, "[fd00::9]:8888") bind(fd10, "[fd00::10]:8888") /* Correctly return -EADDRINUSE because "hash" is used * instead of "hash2". udp_lib_lport_inuse() detects the * conflict. */ bind(fail_fd, "[::]:8888") /* After one more socket is bound to "[fd00::11]:8888", * hslot->count exceeds 10 and "hash2" is used instead. */ bind(fd11, "[fd00::11]:8888") bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */ The same issue applies to the IPv4 wildcard address "0.0.0.0" and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For example, if there are existing sockets bound to "192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or "[::ffff:0.0.0.0]:8888" can also miss the conflict when hslot->count > 10. TCP inet_csk_get_port() already has the correct check in inet_use_bhash2_on_bind(). Rename it to inet_use_hash2_on_bind() and move it to inet_hashtables.h so udp.c can reuse it in this fix. | ||||
| CVE-2026-31500 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET and Intel exception-info retrieval) without holding hci_req_sync_lock(). This lets it race against hci_dev_do_close() -> btintel_shutdown_combined(), which also runs __hci_cmd_sync() under the same lock. When both paths manipulate hdev->req_status/req_rsp concurrently, the close path may free the response skb first, and the still-running hw_error path hits a slab-use-after-free in kfree_skb(). Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it is serialized with every other synchronous HCI command issuer. Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 | ||||
| CVE-2026-31496 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc"). | ||||
| CVE-2026-31495 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree. | ||||
| CVE-2026-31494 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333 flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff) raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== Fix it by making sure the copied size only considers the active number of queues. | ||||
| CVE-2026-31488 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) | ||||
| CVE-2026-31485 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove(). | ||||
| CVE-2026-31469 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns | ||||
| CVE-2026-31466 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix folio isn't locked in softleaf_to_folio() On arm64 server, we found folio that get from migration entry isn't locked in softleaf_to_folio(). This issue triggers when mTHP splitting and zap_nonpresent_ptes() races, and the root cause is lack of memory barrier in softleaf_to_folio(). The race is as follows: CPU0 CPU1 deferred_split_scan() zap_nonpresent_ptes() lock folio split_folio() unmap_folio() change ptes to migration entries __split_folio_to_order() softleaf_to_folio() set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry)) smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio)) prep_compound_page() for tail pages In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages are visible before the tail page becomes non-compound. smp_wmb() should be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a result, if zap_nonpresent_ptes() accesses migration entry that stores tail pfn, softleaf_to_folio() may see the updated compound_head of tail page before page->flags. This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio() because of the race between folio split and zap_nonpresent_ptes() leading to a folio incorrectly undergoing modification without a folio lock being held. This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further swapops predicates"), which in merged in v6.19-rc1. To fix it, add missing smp_rmb() if the softleaf entry is migration entry in softleaf_to_folio() and softleaf_to_page(). [tujinjiang@huawei.com: update function name and comments] | ||||
| CVE-2026-31452 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations. | ||||
| CVE-2026-31451 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. | ||||