Export limit exceeded: 398180 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398180 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98036 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve special fields in recycled rhtab elements rhtab_map_update_elem() initializes special fields after obtaining an element from bpf_mem_cache_alloc(). The allocator can return a fresh, zeroed unit, or recycle one from its RCU-pending lists before the registered destructor has run. A BPF program can retain a map-value pointer after deleting its element and initialize and arm a timer through that pointer. If the deleted unit is recycled, check_and_init_map_value() clears the only pointer to the timer. Neither a later deletion nor rhtab_mem_dtor() can then cancel it, and the callback can run with its key and value pointing into freed memory. Do not reinitialize special fields on insertion. Fresh allocator units are already zeroed. For recycled units, the special fields are ownership state that must remain visible to the eventual destructor. copy_map_value() already skips those fields, matching the non-preallocated hash-map path and the lifecycle established by commit 275c30bcee66 ("bpf: Don't reinit map value in prealloc_lru_pop"). [ kkd: Split out the fix and rewrote the commit log ] | ||||
| CVE-2026-98037 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject untrusted allocated-object pointers When the final RCU read-side critical section ends, a local kptr is demoted to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer to an object whose lifetime is no longer protected. type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with MEM_ALLOC as a live allocated object. In particular, a refcount-only local kptr never carries NON_OWN_REF, so it still passes the bpf_refcount_acquire() argument check after RCU protection ends. The kfunc can then dereference NULL or stale memory. Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since type_is_non_owning_ref() is based on the same predicate, graph kfunc arguments obey the same live-object requirement. Fault-protected reads of the demoted pointer remain valid: writes are already rejected, and read fixups use bpf_may_fault_on_deref() rather than this predicate. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-97869 | 1 Langchain4j | 1 Langchain4j | 2026-09-25 | 4.1 Medium |
| A flaw has been found in langchain4j up to 1.5.3-beta10/1.11.10-beta18/1.18.1-beta27. This vulnerability affects the function AgenticScopeSerializer.fromJson of the file AgenticScopeJsonSerializationIT.java of the component LangChain4j-agentic. This manipulation causes deserialization. Remote exploitation of the attack is possible. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been published and may be used. Upgrading to version 1.5.3-beta11, 1.11.10-beta19 and 1.18.1-beta28 is able to resolve this issue. Upgrading the affected component is advised. The project maintainer kindly explains: "The issue was reported to us privately on 23 July 2026 and fixed in releases published on 29 July 2026. It is tracked as GHSA-gmwr-7wmf-mrjm. Exploitation requires an application to have enabled AgenticScope persistence, which is opt-in, and an attacker who can already write to that store. All maintained release lines have been patched." | ||||
| CVE-2026-73241 | 1 Freerdp | 1 Freerdp | 2026-09-25 | 7.5 High |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP server-side RDSTLS in libfreerdp/core/rdstls.c accepts an attacker-supplied RDSTLS_TYPE_CAPABILITIES PDU while rdstls_server_authenticate is waiting for RDSTLS_TYPE_AUTHREQ, leaving resultCode at RDSTLS_RESULT_SUCCESS and allowing a remote unauthenticated client to bypass the RedirectionGuid, username, domain, or password checks. This issue is fixed in version 3.30.0. | ||||
| CVE-2026-69433 | 1 Microsoft | 21 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 18 more | 2026-09-25 | 7.8 High |
| Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69434 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-25 | 8.8 High |
| Heap-based buffer overflow in Windows URL Moniker allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97941 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_from_new_slab+0x183/0x300 ___slab_alloc+0x31c/0x890 __kmalloc_noprof+0x3d4/0x800 lsm_blob_alloc+0x2d/0x50 security_msg_msg_alloc+0x26/0x90 load_msg+0x1aa/0x210 do_msgsnd+0x91/0x800 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Kernel panic - not syncing: Fatal exception This is a classic ABA problem where cmpxchg succeeds but the state has changed since __refill_objects_node() took the freelist from the slab. As Vlastimil Babka mentioned [2], it should be rare to return more than one slab (due to the racy read of slab->counters in get_partial_node_bulk()). Therefore, instead of introducing additional complexity, acquire and release n->list_lock twice in the worst case. Return the slab directly to the partial list and hold n->list_lock across the cmpxchg and add_partial(). This is similar to the initial version of commit ba7425312607 [3]. This is enough to avoid the race as the list manipulation is serialized by n->list_lock. While at it, bring back unlikely() hint now that the condition is unlikely. | ||||
| CVE-2026-97944 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash() The switch of the FineIBT preamble from "subl $hash, %r10d" to the shorter "subl $hash, %eax" moved the hash immediate from offset 7 to offset 5 of the preamble. fineibt_preamble_hash was updated to match, but the open-coded offset in cfi_get_func_hash() was missed and it still reads the hash at offset 7. cfi_get_func_hash() is used by the BPF JIT to give a struct_ops trampoline the CFI hash of the stub function it stands in for. With FineIBT the trampoline now gets the upper half of the real hash followed by the first two bytes of the next instruction, so the first indirect call from the kernel into a struct_ops program, tcp_init_congestion_control() calling ->init() of a BPF congestion control for example, fails the FineIBT check and the kernel dies with a CFI failure. Move the FineIBT preamble template and its offset defines above cfi_get_func_hash() and use fineibt_preamble_hash there, so every reader of the preamble shares one definition of its layout. The CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only configuration in which cfi_mode can take that value. cfi_get_func_arity() does not need the same treatment: the __bhi_args call whose displacement it reads still ends at the function address. | ||||
| CVE-2026-97945 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix user-space data loss with MADV_FREE and THP Some of users of Polars (a data analytics library) have lost production data from this bug. They seem to have just the right combination of huge pages, MADV_FREE and heavy reclaim pressure. pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY), silently discarding the hardware dirty bit. The subsequent pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into _PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already stripped from the value, so there is nothing left to transfer. Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask, and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify() is the odd one out. Any pmd_modify() on a writable, dirty PMD loses the dirty state. One visible consequence is data loss with MADV_FREE on PMD-mapped THP: memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty madvise(buf, size, MADV_FREE); // PMD cleaned but left writable, // folio marked lazyfree memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit mprotect(buf, size, PROT_READ|PROT_WRITE); // ... memory pressure ... Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with no dirty bit set anywhere and frees it in __discard_anon_folio_pmd_locked(), even though the data was rewritten after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA hinting alone can trigger the same loss, as do_huge_pmd_numa_page() restores the PMD through pmd_modify() as well. PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping the dirty bit means rewritten data is never written back. Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like pte_modify() and pud_modify() do. The existing pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the hardware-dirty <-> saved-dirty transition based on the write bit, preserving the shadow-stack encoding rules. | ||||
| CVE-2026-97946 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix PCI device reference counting in amd_smn_init() The local "root" pointer is a temporary variable used during the device search. Therefore, refcount related to the search iterators should be cleaned up after the search is complete. Use the __free() cleanup macro to ensure the refcount is decremented when the temporary pointer goes out of scope. Additionally, increment the refcount when caching a root pointer. This ensures the in-use refcount is separate from the temporary search refcounting. Finally, drop the redundant "root = NULL" before the second search loop. The pci_get_class() iterator always decrements the refcount of its "from" argument, so the first loop can only fall through with "root" already NULL. | ||||
| CVE-2026-97949 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them. | ||||
| CVE-2026-97951 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands When a LUN_RESET aborts a WRITE command that is in the TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and waits for the frontend to finish processing. If the initiator subsequently sends the remaining dataout PDUs, __iscsit_check_dataout_hdr() catches the payload, stops the dataout timer if the sequence is final and finally dumps the data. However, the iSCSI target doesn't trigger the completion process for these aborted commands. Because of this, the abort path hangs indefinitely in target_put_cmd_and_wait(), leading to a deadlocked target worker thread. Fix this by explicitly calling target_complete_cmd() when the final dataout PDU is received for an aborted WRITE command. target_complete_cmd() detects the CMD_T_ABORTED flag and cleanly routes the command into target_abort_work, allowing the abort completion to successfully unblock. | ||||
| CVE-2026-97952 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sunvdc: unmap LDC cookies when the descriptor send fails __send_request() maps the request's pages into the LDC channel's map table (ldc_map_sg()), fills in the descriptor and marks it VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger(). When the trigger fails, the error path only prints a message: the descriptor stays READY and the cookies are never unmapped. The mapping is normally released in vdc_end_one() when the peer completes the descriptor - but a descriptor whose doorbell was never sent will never complete, and since dr->prod is not advanced on failure, the reset path (vdc_requeue_inflight(), which walks [cons, prod)) never visits it either. The map table entries are leaked permanently. Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN") trigger failures occur in practice under load, so every resulting I/O error also leaks one request's worth of entries from the fixed-size (8192 entries per channel) map table. Because the allocator hands out contiguous ranges, fragmentation makes large multi-segment requests fail first as the table drains, until ldc_map_sg() fails permanently and the disk is dead until reboot. It also makes any retry-based recovery unusable: requeuing the request on -EAGAIN remaps the pages on every attempt, overwriting desc->cookies and orphaning the previous mapping, so the table drains at the retry rate. This is the memory exhaustion observed when the requeue approach was first tested in October 2025. Roll back on failure: unmap the cookies, mark the descriptor FREE again and clear the request entry. If the trigger failed with -ENOTCONN, __vdc_tx_trigger() has already reset the port, which tears down and reallocates both the dring and the LDC channel including its map table - nothing to roll back, and the stale descriptor must not be touched. | ||||
| CVE-2026-97953 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS context descriptor. For a highly fragmented TSO skb the check can therefore pass even when the ring has too few free slots. stmmac_tso_allocator() then writes past the available descriptors, overwriting descriptors still owned by the DMA engine, corrupting the TX ring. Add stmmac_tso_get_num_desc() to compute the exact number of descriptors needed for the header, the linear payload and each fragment, plus the MSS context descriptor when required, and use it in the availability check. | ||||
| CVE-2026-97955 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: restore the XDP program pointer when pre-allocation fails mana_xdp_set() publishes the new program into apc->bpf_prog before it allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers from it via mana_get_rxbuf_cfg(). When that allocation fails the function returns the error directly, skipping the err_dealloc_rxbuffs label which is the only place that restores the previous pointer. The attach is reported as failed, so the BPF core drops the reference it held for the caller and the program can be freed, while apc->bpf_prog still points at it. The next consumer of mana_xdp_get() - typically mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or after a TX timeout reset - then calls bpf_prog_add() on freed memory. This is reachable from an ordinary "ip link set dev ethX xdp obj ..." whenever the per-queue RX buffer pre-allocation cannot be satisfied. Restore the previous program on that error path. | ||||
| CVE-2026-97958 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain(). If a netlink socket sends RTM_GETCHAIN requests repeatedly without recv()ing the responses, tc_ctl_chain() hogs CPU and triggers Hung Task splat. [0] As caught in the stack trace, netlink_attachskb() could confuse tc_ctl_chain() by returning -EAGAIN when the userspace netlink socket's receive buffer is full. The replay: label exists since commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") but was not used initially. Since commit 9f407f1768d3 ("net: sched: introduce chain templates"), the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops() may release RTNL to call request_module(). However, the replay logic is unnecessary for RTM_GETCHAIN. Let's apply the replay logic only for RTM_NEWCHAIN. [0]: INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022. task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000 Call Trace: <TASK> ? clockevents_program_event (kernel/time/clockevents.c:372) ? pskb_expand_head (net/core/skbuff.c:615) ? skb_release_data (net/core/skbuff.c:1122) ? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232) ? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499) ? tc_chain_notify (net/sched/cls_api.c:3045) ? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041) ? netlink_unicast (net/netlink/af_netlink.c:1335) ? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985) ? tc_ctl_chain (net/sched/cls_api.c:3242) ? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146) ? netlink_unicast (net/netlink/af_netlink.c:1354) ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177) ? netlink_rcv_skb (net/netlink/af_netlink.c:2556) ? netlink_unicast (net/netlink/af_netlink.c:1319) ? netlink_sendmsg (net/netlink/af_netlink.c:1900) ? __sock_sendmsg (net/socket.c:800) ? __sys_sendto (net/socket.c:2281) ? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284) ? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) ? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> | ||||
| CVE-2026-97959 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: free emptied bucket on filter move route4_change can move an existing filter to a different top-level bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/ FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so for an existing filter the new handle may differ from the old one and land in a different bucket. When this happens, the filter is unlinked from the old bucket, but the bucket itself is never freed once it goes empty. The stale empty bucket remains in head->table[], causing route4_delete to report *last=false even after the last live filter is gone. That pins the empty tcf_proto and causes a leak. Fix this by refcounting the filters linked to a bucket and freeing the bucket when the count drops to zero. The existing scan in route4_delete goes away with it. The count is updated at all sites that link or unlink a filter during add, change and delete, and the bucket is dropped from head->table[] as soon as it reaches zero. Conditions to recreate the bug: CONFIG_NET_CLS_ROUTE4=y, CONFIG_NET_SCH_INGRESS=y, CONFIG_NET_CLS_ACT=y. tc qdisc replace dev lo clsact tc filter add dev lo ingress protocol ip pref 100 route from 1 to 1 tc filter change dev lo ingress protocol ip pref 100 handle 0x10001 \ route from 1 to 2 tc filter del dev lo ingress protocol ip pref 100 handle 0x10002 \ route from 1 to 2 tc filter show dev lo ingress | grep -c 'pref 100 route chain 0 ' | ||||
| CVE-2026-97868 | 1 Sheshbabu | 1 Zen | 2026-09-25 | 3.5 Low |
| A security vulnerability has been detected in sheshbabu zen up to 1.5.0. Affected by this issue is the function dangerouslySetInnerHTML of the file features/notes/NotesEditor.jsx of the component Note Editor. The manipulation leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-96874 | 2026-09-25 | N/A | ||
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in the Mediawiki - Cargo extension allows Stored XSS. This issue affects Mediawiki - Cargo extension: through 3.9.4. | ||||
| CVE-2026-69436 | 1 Microsoft | 18 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 15 more | 2026-09-25 | 7.8 High |
| Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally. | ||||