Export limit exceeded: 378312 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378312 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378312 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74351 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-74352 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails The global pointer 'reserved_mem' continues to reference the reserved_mem_array which lives in __initdata if alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is exported for post-init use, that would dereference freed memory and trigger a use-after-free. So reset reserved_mem_count to 0 when alloc_reserved_mem_array() fails. | ||||
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74355 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE(). | ||||
| CVE-2026-74357 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump The ring content dump in amdgpu_coredump() uses two separate loops over adev->rings[]: the first counts rings with unsignalled fences to size the allocation, and the second copies ring data into the allocated buffers. Both loops use the same condition to skip rings: atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq Because last_seq is an atomic that is updated concurrently by the fence signalling path, additional rings may appear unsignalled in the second loop that were signalled during the first. When this happens, idx exceeds the allocated ring_count and the store to coredump->rings[idx] writes past the end of the kcalloc-ed buffer. This was found during IGT stressful test amd_queue_reset which triggers random GPU resets. The OVERSIZE subtest (CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes a ring timeout and subsequent coredump, which hits the race between the counting and copying loops. The failure is non-deterministic and depends on fence signalling timing during the reset. KASAN log: BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu] Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625 CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35 Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched] Call Trace: <TASK> dump_stack_lvl+0xa5/0x110 print_report+0xd1/0x660 kasan_report+0xf3/0x130 __asan_report_store4_noabort+0x17/0x30 amdgpu_coredump+0x1274/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] drm_sched_job_timedout+0x194/0x5c0 [gpu_sched] process_one_work+0x84b/0x1990 worker_thread+0x6b8/0x11b0 </TASK> Allocated by task 23625: kasan_save_stack+0x39/0x70 __kasan_kmalloc+0xc3/0xd0 __kmalloc_noprof+0x2ec/0x910 amdgpu_coredump+0x5c5/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] The buggy address belongs to the object at ffff888106154200 which belongs to the cache kmalloc-rnd-09-96 of size 96 The buggy address is located 16 bytes to the right of allocated 72-byte region [ffff888106154200, ffff888106154248) 72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3 but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes past the allocation. Fix by adding an idx < ring_count guard to the copy loop so it cannot exceed the allocated count even when the fence state changes between the two passes. | ||||
| CVE-2026-74359 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | ||||
| CVE-2026-74360 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject exclusive maps for bpf_map_elem iterators Exclusive maps (aka excl_prog_hash) are meant to be reachable only from the single program whose hash matches. This is enforced by check_map_prog_compatibility() when the map is referenced from a program such as signed BPF loaders. A bpf_map_elem iterator, however, binds its target map at attach time in bpf_iter_attach_map() instead of referencing it from the program, so the exclusivity check is never reached. On top of that, the iterator exposes the map value as a writable buffer. | ||||
| CVE-2026-74362 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext2: fix ignored return value of generic_write_sync() Fix ext2_dio_write_iter() to propagate the error returned by generic_write_sync() instead of silently discarding it, which could cause write(2) to return success to userspace on O_SYNC/O_DSYNC files even when the sync failed. The correct pattern, already used in ext2_dax_write_iter() in the same file and in ext4, xfs, f2fs among others, is: if (ret > 0) ret = generic_write_sync(iocb, ret); Found by Linux Verification Center (linuxtesting.org) with SVACE. [JK: Reflect also filemap_write_and_wait() return value] | ||||
| CVE-2026-74267 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-74271 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | ||||
| CVE-2026-74276 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: xilinx: use FIFO occupancy register to determine buffer size The method the driver uses to determine the size of the FIFO has a problem. What it currently does is this: It stops the SPI hardware and writes to the TX FIFO register until TX FIFO FULL asserts in the status register. But the hardware does not only have the FIFO, it also has a shift register which can hold a byte. This can be seen, when writing a byte to the FIFO (while the SPI hardware is stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size of 16 for example, the current method returns a 17. This is a problem, at least when using the driver in irq mode. The same size determined for the TX FIFO is also assumed for the RX FIFO. When a SPI transaction wants to write the amount of the FIFO size or more bytes, the following happens, for example with 16 bytes FIFO size: The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and starts the SPI hardware and goes sleep. The hardware then shifts out 17 bytes (FIFO + shift register) and simultaneously reads bytes into the RX FIFO, but it only has 16 places, so it looses one byte. Then TX FIFO empty asserts, wakes the driver again, which has a fast path and reads 16 bytes from the RX FIFO, but before reading the last 17th byte (which is lost) it does this: sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); if (!(sr & XSPI_SR_RX_EMPTY_MASK)) { xilinx_spi_rx(xspi); rx_words--; } It reads the status register and checks if the RX FIFO is not empty. But it is empty in our case. So this check spins in a while loop forever locking the driver. This patch fixes the logic to determine the FIFO size. | ||||
| CVE-2026-74277 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length of the current scatterlist segment `s` is incorrectly assigned from the head entry `sg->length` instead of the current entry `s->length`. This typo causes all P2PDMA segments in the scatterlist to inherit the length of the first segment, leading to corrupted DMA lengths for multi- segment scatterlists. Fix this by using `s->length` instead of `sg->length`. | ||||
| CVE-2026-74281 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: reject inverted service ranges from peer bindings tipc_update_nametbl() inserts a binding advertised by a peer node using the lower and upper service-range bounds taken directly from the wire, without checking that lower <= upper. The local bind path validates the ordering (tipc_uaddr_valid()), but the name-distribution path does not. A binding with lower > upper is inserted at the far end of the service-range rbtree (keyed on lower) where no lookup or withdrawal can ever match it (service_range_foreach_match() requires sr->lower <= end). The publication, its service_range node and the augmented rbtree entry are then leaked for the lifetime of the namespace, and there is no per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings. Reject inverted ranges in the network path as well. A peer node can otherwise leak unbounded binding-table memory by sending PUBLICATION items with lower > upper. | ||||
| CVE-2026-74283 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: require net admin for TIPCv2 netlink mutators TIPCv2 registers mutating generic-netlink operations without admin permission flags. Generic netlink only checks CAP_NET_ADMIN when an operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local unprivileged process can currently change TIPC state through commands such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and bearer enable/disable. The legacy TIPC netlink API already checks netlink_net_capable(..., CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which maps to the same namespace-aware CAP_NET_ADMIN check that netlink_net_capable() performs, so the behaviour matches the legacy path and keeps working for CAP_NET_ADMIN holders in a non-initial user namespace (containers). A QEMU/KASAN repro run as uid/gid 65534 with zero effective capabilities previously succeeded in changing the network id and node identity, setting and flushing key material, and enabling/disabling a UDP bearer. With this patch applied the same operations fail with -EPERM. | ||||
| CVE-2026-74285 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: Stop leased rxq before uninstalling its memory provider netif_rxq_cleanup_unlease() tears down the memory provider that was installed on a physical RX queue through a netkit queue lease. It currently revokes the provider's DMA mappings before stopping the physical queue: __netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */ __netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */ This inverts the ordering used by the regular teardown paths (normal device unregister and the io_uring zcrx close path), which stop the queue before revoking the provider's mappings. With the physical queue still live, its NAPI can keep consuming net_iov entries from the page_pool alloc cache after the __netif_mp_uninstall_rxq() has already cleared their dma_addr, opening a window for the device to DMA to a stale or zero address. Fix it by swapping the two calls so the queue is stopped (and its NAPI quiesced) before the provider is uninstalled. No functional regression was observed across repeated runs of the nk_qlease.py HW selftest, which exercises the lease teardown path; this was tested against fbnic QEMU emulation. | ||||
| CVE-2026-74291 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Check PCM and DAI name strings before use Topology objects store several PCM and DAI names in fixed-size UAPI arrays. Other topology parser paths validate these fields with bounded strnlen() checks before using them as C strings, but the PCM and DAI paths still pass some fixed-size arrays directly to strlen(), devm_kstrdup(), DAI lookup, and diagnostic prints. A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream capability name can therefore make the parser read past the end of the fixed-size field. Reject unterminated PCM and DAI name fields before consuming them as C strings. | ||||
| CVE-2026-74293 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_audmix: Validate written enum values fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src() convert the user-provided enum item with snd_soc_enum_item_to_val() before checking whether the item is within the enum's item count. The generic snd_soc_put_enum_double() helper performs that validation, but these callbacks use the converted value first: the clock-source path tests it with BIT(), and the output-source path indexes the prms transition table with it. Reject out-of-range enum items before converting them. | ||||
| CVE-2026-74295 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. | ||||