Export limit exceeded: 48119 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (48119 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74324 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: validate skb length in testmode query In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg() is used in a memcpy without validating its length: memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN); where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response shorter than 520 bytes (8 + 512), this reads beyond the skb data buffer. The over-read data is then returned to userspace via nla_put() in mt7925_testmode_dump(). Add a length check before the memcpy to ensure the skb contains sufficient data. | ||||
| CVE-2026-74518 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-up runs in a while loop that re-checks the cache deficit after re-acquiring the lock. For a shared mapping the resv_map is shared by every mapper of the hugetlbfs inode, so a concurrent region_chg()/region_add()/region_del() on the same resv_map can consume cache entries during the unlocked window and force a second iteration. That iteration calls list_add() on the stale head and corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check trips: list_add corruption. next->prev should be prev (ffffc900011ff7f8), but was ffff88814c281460. (next=ffff88814c545640). kernel BUG at lib/list_debug.c:31! allocate_file_region_entries+0x191/0x420 region_chg+0x267/0x300 hugetlb_reserve_pages+0x387/0xc80 hugetlbfs_file_mmap+0x2ce/0x3f0 mmap_region+0x1348/0x1a80 do_mmap+0x85e/0xb90 vm_mmap_pgoff+0x18c/0x330 ksys_mmap_pgoff+0x2a1/0x3e0 do_syscall_64+0xd7/0x420 Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack address into resv->region_cache, leading to later use-after-free. This was observed as a real host panic on a dense KVM host where a QEMU guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one shared resv_map. Use list_splice_init() so the source head is re-initialized empty after each splice, making the retry loop safe. | ||||
| CVE-2026-74275 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach() In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for accessing p->targets[]. However, cxled->pos can be set to negative errno in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This causes the driver to use a negative index to access p->targets[], resulting in out-of-bounds access. Fix it by walking p->targets[] instead of using cxled->pos directly. | ||||
| CVE-2026-74346 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix OOB read during CQ MR registration Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, it would always be false during MR registration and would therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2 HW and beyond: cqmr->shadow = (dma_addr_t)arr[req->cq_pages]; The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal to iwmr->page_cnt and therefore equal to the size of arr, which would cause an OOB read by one. | ||||
| CVE-2026-74361 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). | ||||
| CVE-2026-74297 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values. | ||||
| CVE-2026-74300 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: validate codec capability element length Read Local Codec Capabilities returns a sequence of capability elements. Each element starts with a one-byte length followed by that many payload bytes. hci_read_codec_capabilities() checks that the skb contains the length byte, but then validates only caps->len against the remaining skb length. A malformed controller response with one remaining byte and caps->len set to one passes that check even though the element needs two bytes. The parser then records a two-byte capability and copies one byte beyond the advertised response payload into the codec list. Validate the full element size, including the length byte, before adding it to the accumulated capability length. This preserves all well-formed capability elements and drops only truncated controller responses. | ||||
| CVE-2026-74380 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix iommu_map_sgtable() return value check Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. pin_job() also was incorrectly assigning to 'int', which could cause overflows into negative values. Update pin_job() to correctly check for errors from iommu_map_sgtable. | ||||
| CVE-2026-74409 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values. | ||||
| CVE-2026-74320 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: sm501fb: Fix buffer errors in OF binding code The code that gets the frame buffer mode from OF has 'use after free', 'buffer overrun' and memory leaks. info->edid_data isn't free if the probe functions fail or if pd->def_mode is set. If both the CRT and PANEL are enabled info->edid_data is used after being freed and is freed twice. The string returned by of_get_property(np, "mode", &len) is just written over either the static "640x480-16@60" or the module parameter string without any regard for the length (which is most likely longer). Use kstrump() for the OF mode and free everything before freeing 'info. | ||||
| CVE-2026-74332 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74336 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bound S1G TIM PVB walk to the TIM element ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a received TIM element. The TIM is handed in as the element payload: ieee802_11_parse_elems_full() stores elems->tim = elem->data and elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes are [tim, tim + tim_len). When walking the encoded blocks the function passes the walker an end sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end) and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read *ptr), so it can read up to two bytes beyond the TIM element -- an out-of-bounds read of adjacent skb/heap data when the TIM is the last element in the frame. The +2 appears to account for the element id/len header, but tim already points past that header at the element payload, so the addend is wrong. Pass the correct element end, (const u8 *)tim + tim_len. | ||||
| CVE-2026-74399 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: evm: terminate and bound the evm_xattrs read buffer evm_read_xattrs() allocates size + 1 bytes, fills them from the list of enabled xattrs, and then passes strlen(temp) to simple_read_from_buffer(). When no configured xattrs are enabled, the fill loop stores nothing and temp[0] remains uninitialized, so strlen() reads beyond initialized memory. Explicitly terminate the buffer after allocation, use snprintf() for each formatted line, and pass the accumulated length, without risk of truncation, to simple_read_from_buffer(). | ||||
| CVE-2026-74417 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via AST-based call-graph analysis using sqry. | ||||
| CVE-2026-74419 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space should be limited by the buffer size provided by the application. If the buffer is smaller than the data size, return only the portion that fits instead of failing. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74443 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. | ||||
| CVE-2026-74447 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) | ||||
| CVE-2026-74454 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. | ||||
| CVE-2026-74495 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: igbvf: Fix leak in TX DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented before each frag mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping (the head) would leak. This bug was introduced by a 2010 fix for an endless loop in dma_error. All other affected drivers have already been fixed. | ||||