Export limit exceeded: 401112 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401112 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98142 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/cirrus-qemu: Validate BAR0 size during probe The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate framebuffer sizes. However, during PCI probe, the driver mapped BAR0 without verifying that its size matches `CIRRUS_VRAM_SIZE`. If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the mapped VRAM will be smaller than expected. Because validation checks assume 4 MB VRAM, framebuffers larger than the mapped memory can be created. When the display plane is updated (e.g. during release), `cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory causes a supervisor write page fault: BUG: unable to handle page fault for address: ffffc9000389c000 ... RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110 ... Call Trace: <TASK> iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline] drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442 cirrus_primary_plane_helper_atomic_update+0x98a/0xb00 drivers/gpu/drm/tiny/cirrus-qemu.c:358 drm_atomic_helper_commit_planes+0x626/0xea0 drivers/gpu/drm/drm_atomic_helper.c:3038 drm_atomic_helper_commit_tail+0x60/0x510 drivers/gpu/drm/drm_atomic_helper.c:1989 commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074 drm_atomic_helper_commit+0xa77/0xb10 drivers/gpu/drm/drm_atomic_helper.c:2312 Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. | ||||
| CVE-2026-98130 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START The SCTP_CMD_TIMER_START handler checks timer_pending() before calling timer_reduce(). The timer can expire and detach between these operations, causing timer_reduce() to rearm the timer without taking the association reference required for the newly armed timer. The timer callback later unconditionally drops its association reference, which can leave the association reference count unbalanced and result in use-after-free during association teardown. Use the return value of timer_reduce() to determine whether the timer was actually armed. Take the association reference only when timer_reduce() successfully starts a new timer, closing the race between checking the timer state and rearming it. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative. | ||||
| CVE-2026-98129 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add() sas_port_alloc_num() can return NULL on memory allocation failure. The return value is passed directly to sas_port_add() without a NULL check, which causes a NULL pointer dereference. Additionally, if sas_port_add() fails, the allocated port is not freed before jumping to out_fail, leaking the sas_port structure. Call sas_port_free() to properly release it. | ||||
| CVE-2026-98128 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add() mpi3mr_get_tgtdev_by_addr() increments the target device kref when it returns a device. If a subsequent error triggers a goto out_fail after the tgtdev reference is acquired, the reference is never released because the out_fail path does not call mpi3mr_tgtdev_put(). This prevents the target device structure from ever being freed. Add a tgtdev put in the out_fail path, guarded by a NULL check since tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup path is shared by earlier error cases where tgtdev is still NULL. | ||||
| CVE-2026-98123 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration sctp_verify_asconf() walks ASCONF-ACK parameters with sctp_walk_params(), which advances by SCTP_PAD4(length), while the consumer sctp_get_asconf_response() iterates the same parameters advancing by the raw length, without padding. A single odd-length parameter desynchronises the two walks and makes the consumer interpret attacker-controlled bytes at a misaligned offset. When those bytes yield a length of zero, the while loop over asconf_ack_len makes no progress, spinning forever in softirq context, and the watchdog reports a soft lockup. All reads stay within the received skb, so the lockup is a pure remote denial of service. A remote peer can trigger it with a crafted ASCONF-ACK on an ADD-IP enabled association with an outstanding ASCONF (RFC 5061 section 4.1.2 requires the chunk to be authenticated, but the predefined empty key id 0 allows the peer to compute the same association HMAC from publicly exchanged parameters, so the gate does not help). The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs no length check, letting a parameter without a complete error header reach the consumer, which reads errhdr.cause past the end of the parameter, an out-of-bounds read. Reject SCTP_PARAM_ERR_CAUSE parameters shorter than sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the verifier, and advance the consumer iterator with the same padding rule as the verifier to keep the two walks in lockstep. The verifier change guarantees a complete error header in every ERR_CAUSE parameter the consumer can see, so the consumer's asconf_ack_len check is dropped and it returns err_param->cause directly. The consumer padding fix is still required because odd lengths remain valid for SCTP_PARAM_ERR_CAUSE per RFC 5061. The issue was found by ZeroHive, a vulnerability hunting agent at Tencent Yunding Lab. | ||||
| CVE-2026-98122 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del() vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every MDBE_ATTR_SRC_LIST member, accepts the all-zeros address. A source list is only accepted on a (*, G) entry, whose source is the all-zeros address, and for each member of the list an (S, G) entry is derived from it by substituting the source. Entries are keyed by a plain memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present and holds the all-zeros address and the source list holds it as well, the derived (S, G) key is byte-identical to the (*, G) key and resolves to the same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is then left with a zero address family. vxlan_mdb_remote_src_del() removes the forwarding entry of a source before freeing the source entry: vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr); vxlan_mdb_remote_src_entry_del(ent); With the keys aliased, the first call deletes the remote of the entry that owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second call then runs on the freed entry, and its hlist_del() reads ->pprev and ->next out of it and writes through them. Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the all-zeros source for deletion and reaches this from the sweep at the end of vxlan_mdb_remote_srcs_replace(). BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70 Read of size 8 at addr ffff888102852500 by task poc/84 __vxlan_mdb_add+0x1cd/0xd70 vxlan_mdb_add+0xc0/0x140 rtnl_mdb_add+0x157/0x2a0 rtnetlink_rcv_msg+0x207/0x5a0 Allocated by task 84: __kmalloc_cache_noprof+0x153/0x360 vxlan_mdb_remote_srcs_add+0x2eb/0x440 __vxlan_mdb_add+0x803/0xd70 Freed by task 84: kfree+0x14c/0x3b0 vxlan_mdb_remote_del+0x129/0x1a0 __vxlan_mdb_del+0x4f/0xe0 vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0 __vxlan_mdb_add+0x1c5/0xd70 The MDB operations are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers both call sites. A (*, G) entry is expressed by omitting the source, so nothing legitimate is refused. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-98121 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix NULL pointer dereference in PM callbacks msc313e_wdt_probe() doesn't set the driver data for the platform device. As a result, dev_get_drvdata() in msc313e_wdt_suspend() and msc313e_wdt_resume() will return NULL, leading to a NULL pointer dereference afterward. Set the platform device driver data in msc313e_wdt_probe(). | ||||
| CVE-2026-98116 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation with an mmap_count check performed under the PCM stream lock, but the lock is released long before the buffer is actually freed: snd_pcm_sync_stop(), constraint refinement and do_free_pages() all happen in between. snd_pcm_mmap_data(), on the other hand, takes no lock at all: it validates against the old buffer's state and dma_bytes, remaps its pages into the VMA, and only then increments mmap_count. A concurrent mmap() can therefore slip in between the check and the free. remap_pfn_range() installs writable PTEs for the old buffer's pages without taking page references, and the subsequent do_free_pages() returns those pages to the page allocator while the VMA still maps them. This leaves a stale, writable mapping of freed pages: a page-level use-after-free that can be leveraged for local privilege escalation. Make snd_pcm_mmap_data() participate in the buffer-access scheme introduced for hw_params/hw_free: acquire runtime->buffer_accessing before validating and remapping, and release it afterwards. Buffer reallocation already fails with -EBUSY while accessors are active, and the mmap side now fails with -EBUSY while a reallocation is in progress, so the validate/remap sequence and the check/free sequence can no longer interleave. A reproducer that turns this race into a stale writable mapping of the freed DMA buffer pages is available on request. | ||||
| CVE-2026-98113 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log. | ||||
| CVE-2026-98111 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field. | ||||
| CVE-2026-98109 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: <TASK> msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed. | ||||
| CVE-2026-98108 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan l2cap_new_connection() sets default value of channel mode to match the parent channel. l2cap_le_connect_req() left this at the default, and created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that mode. This causes FLAG_DEFER_SETUP channels to reply to L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect. It can also result to stack OOB write (of l2cap_alloc_cid determined values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not limit maximum number of deferred channels or check for duplicate ident. Fix by setting chan->mode correctly in l2cap_le_connect_req(). Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE instead of OOB write to make it less brittle. | ||||
| CVE-2026-98104 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() falls back to returning max (htid | 0xFFF) when both idr_alloc_u32() ranges are full, instead of reporting an error. u32_change() trusts that value and inserts a new knode with a handle that is already live in the hash table, breaking handle uniqueness within the table's node ID space. The handle was never reserved in ht->handle_idr, so every later error path that does idr_remove(&ht->handle_idr, handle) removes the reservation of a different, live knode, which is then reused — one failed add compounds into further duplicates. The 4095 limit is per (table, bucket) — ht->handle_idr is per hash table and the range is derived from htid (bucketid), so a table with divisor 256 can legitimately hold 256*4095 knodes. The sibling helper gen_new_htid() has the same silent in-band failure: it returns 0 when the tp_c handle pool (1..0x7FF) is full, and u32_init() publishes the root hash table with handle 0 without checking. Two root tables with handle 0 alias in u32_lookup_ht(), allowing cross-tcf_proto knode add/lookup/delete. Add the same exhaustion check that the divisor path already has. Return an error so u32_change() fails with ENOSPC/ENOMEM when the node ID space is exhausted, and so u32_init() fails with -ENOMEM when the hash table ID space is exhausted. The extack message distinguishes pool exhaustion (-ENOSPC) from a transient allocation failure (-ENOMEM). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded) - Create a clsact qdisc on a device, then add 4095 u32 filters with auto-generated handles to fill the node ID space for the root hash table (single bucket). The 4096th auto-handle filter add triggers the duplicate handle (fh 800::fff reused). Reachable at Level 2 (unshare -Urn, namespace-local CAP_NET_ADMIN). - For gen_new_htid: create 2047 u32 proto entries on the same block to fill the tp_c handle pool, then create one more. The root table gets handle 0 and aliases with other handle-0 root tables. | ||||
| CVE-2026-98102 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src() When removing a source filter whose count reaches zero, ip6_mc_del1_src() unlinks psf from pmc->mca_sources. If the filter was previously active, the code moved psf directly into pmc->mca_tomb by updating psf->sf_next. Because pmc->mca_sources is traversed locklessly under RCU (e.g. by ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period elapses diverts concurrent readers to the tombstone list. Consequently, readers miss remaining active sources in pmc->mca_sources and improperly examine deleted tombstone entries. Fix this by allocating a new tombstone node for pmc->mca_tomb (as done in sf_setstate()) and retiring the original psf via kfree_rcu(). | ||||
| CVE-2026-98101 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessly under rcu_read_lock() by inet6_mc_check() during packet reception in the UDP and RAW multicast receive paths. ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place when adding or removing a source filter. Additionally, when expanding the filter buffer, newpsl was published via rcu_assign_pointer() before writing the new source into the array. Because 16-byte struct in6_addr writes are not atomic and array shifting is not synchronized with RCU readers, concurrent readers in inet6_mc_check() could read torn IPv6 addresses or observe duplicated/missed source entries. Fix this by switching ip6_mc_source() to copy-on-write RCU updates: allocate and fully populate newpsl before publishing it via rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(), matching ip6_mc_msfilter(). Also remove the now unused IP6_SFBLOCK macro. | ||||
| CVE-2026-98098 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/node.c:428) tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189) tipc_udp_recv (net/tipc/udp_media.c:389) Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute) -----------------------------|----------------------------- | ... | list_for_each_entry(publ, pls, binding_node) { | ... | __skb_queue_tail(list, skb); | ... | } | ... | hdr = buf_msg(skb_peek_tail(list)); ... | tipc_nametbl_publish(); | If 'tipc_nametbl_publish()' (Thread 1) fails because the number of local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference. Fix these issues by allowing protocol service types (node state, link state, and topology server) to be inserted into the name table unconditionally. This ensures that users subscribing to these types always receive notifications. In addition, the maximum number of local user publications is reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size calculated in tipc_link_set_queue_limits() remains valid. | ||||
| CVE-2026-98096 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH) while skb_network_header() points at the IPv6 header. When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately followed the fixed IPv6 header. If another extension header (such as a Hop-by-Hop options header) precedes the SRH, skb_network_offset() remained negative. This led to two problems: 1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes __skb_flow_dissect() which passes the negative skb_network_offset() to flow dissection, breaking BPF and C flow dissector logic. 2. If forwarded via ip6_forward() or redirected via act_mirred, downstream handlers (like sch_fragment() or neighbour output) pass the negative offset as an unsigned length, triggering OOB memcpy or buffer overflows. Fix this by pushing -skb_network_offset(skb) before routing, ensuring skb_network_offset(skb) is 0 for route lookup / flow dissection as well as downstream forwarding. On the loopback path, pull skb_transport_offset(skb) to restore skb->data to the SRH before looping back. | ||||
| CVE-2026-98095 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header(). syzbot reported BUG() in sock_sendmsg_nosec(). [0] The problem is that tpacket_parse_header() casts user-provided tpacket_hdr.tp_len, which is u32, to int. If the length is larger than INT_MAX, the following condition in tpacket_parse_header() passes, if (unlikely(tp_len > size_max)) and any negative value can be returned to the caller, up to sock_sendmsg_nosec(). The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec(). *(uint64_t*)0x200000000008 = 0xfffffdef; ... syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul); Let's define the local tp_len as u32 in tpacket_parse_header(). [0]: kernel BUG at net/socket.c:803! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803 Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28 RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293 RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80 RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8 R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001 R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310 FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0 Call Trace: <TASK> __sock_sendmsg net/socket.c:815 [inline] sock_write_iter+0x2de/0x3e0 net/socket.c:1266 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x612/0xba0 fs/read_write.c:687 ksys_write+0x150/0x270 fs/read_write.c:739 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f173130ecb9 Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9 RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388 R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002 </TASK> | ||||
| CVE-2026-98094 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for fbtft_deferred_io(). They only access the dirty line range, so the IRQ-off regions remain short. | ||||
| CVE-2026-98092 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close() acp6x_pdm_dma_close() does not free the runtime->private_data buffer allocated in acp6x_pdm_dma_open(). Add the missing kfree. | ||||