Export limit exceeded: 409360 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409360 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-42006 | 2 Dovecot, Open-xchange | 3 Dovecot, Dovecot, Ox Dovecot Pro | 2026-08-14 | 4.3 Medium |
| An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. | ||||
| CVE-2025-61848 | 1 Fortinet | 7 Fortianalyzer, Fortianalyzer-bigdata, Fortianalyzer Cloud and 4 more | 2026-08-14 | 6.5 Medium |
| An improper neutralization of special elements used in an sql command ('sql injection') vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.4, FortiAnalyzer 7.4.0 through 7.4.8, FortiAnalyzer 7.2 all versions, FortiAnalyzer 7.0 all versions, FortiAnalyzer Cloud 7.6.2 through 7.6.3, FortiAnalyzer-BigData 7.6.0 through 7.6.1, FortiAnalyzer-BigData 7.4.0 through 7.4.5, FortiManager 7.6.0 through 7.6.4, FortiManager 7.4.0 through 7.4.8, FortiManager 7.2 all versions, FortiManager 7.0 all versions, FortiManager Cloud 7.6.2 through 7.6.4 may allow a privileged authenticated attacker to execute unauthorized code or commands via JSON RPC API | ||||
| CVE-2026-43488 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC. | ||||
| CVE-2026-19790 | 1 Tenda | 1 G0 | 2026-08-14 | 8.8 High |
| A vulnerability was identified in Tenda G0 up to 20260625. This issue affects the function formSetPortMirror of the file /goform/module of the component httpd Web Management Interface. Such manipulation of the argument portMirrorMirroredPorts leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-68085 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work there, instead of doing it just in hci_uart_close(). Re-enable and possibly requeue the work after queue flush. | ||||
| CVE-2026-64597 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_close() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_close_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-68257 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix 32-bit overflow in CWSR total size calculation total_cwsr_size was computed in 32-bit before being used as a BO/SVM allocation size. With large ctx_save_restore_area_size and debug_memory_size multiplied by the XCC count, the product can wrap, yielding an undersized CWSR save area that firmware later overruns. Promote total_cwsr_size to u64 and use check_add_overflow()/ check_mul_overflow() in both kfd_queue_acquire_buffers() and kfd_queue_release_buffers(). (cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) | ||||
| CVE-2026-45923 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: enable basic endpoint checking catc_probe() fills three URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt status A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a catc_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls after usb_set_interface() to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time. Similar to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") which fixed the issue in rtl8150. | ||||
| CVE-2026-68409 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain. | ||||
| CVE-2026-68393 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: extend conn_hash lookup critical sections Using RCU-protected pointers outside the critical sections without refcount is incorrect and may result to UAF. Extend critical section to cover both hci_conn_hash lookup and use of the returned conn. Add surrounding rcu_read_lock() also when return value is not used, in preparation for RCU lockdep requirement to hci_lookup_le_connect(). This avoids concurrent deletion of the conn before we are done dereferencing it. Also, make sure to hold hdev->lock when accessing hdev->accept_list. | ||||
| CVE-2026-68330 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE, but some callers expect the NPU to write response data back into the same buffer: - airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into the buffer, then the caller reads it via memcpy() - airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back npu_stats_addr field in the response On non-cache-coherent architectures like EN7581 (Cortex-A53 without hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op — it does not invalidate the CPU cache. If the NPU-written cache line is still present in the CPU cache when the caller reads the buffer, the CPU observes stale data instead of the NPU response. This is a timing-sensitive bug: small mailbox buffers (~24 bytes) typically fit in a single cache line and may survive in the cache until the caller reads them, producing silent data corruption rather than a crash. The bug is more likely to trigger when the caller reads the response immediately after dma_unmap_single() without intervening cache-evicting operations. Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures dma_unmap_single() invalidates the CPU cache on non-coherent systems. The mailbox buffers are small so there is no performance concern. | ||||
| CVE-2026-68415 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: clear mode callbacks after failed mode setup xfrm_state_gc_task can run long after a failed IPTFS state setup. In the reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup returned -ENOMEM before publishing mode_data, and the temporary module reference from xfrm_get_mode_cbs() was dropped immediately. The dead state then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been unloaded. Clear x->mode_cbs when mode init or clone fails before publishing mode_data. Those states never installed mode-specific state or the long-term IPTFS module pin, so deferred GC has nothing mode-specific to destroy and must not retain a callback table pointer past the temporary lookup reference. The buggy scenario involves two paths, with each column showing the order within that path: failed setup path: 1. cache x->mode_cbs 2. mode setup fails before mode_data 3. drop the temporary module ref 4. dead state keeps x->mode_cbs cached GC/unload path: 1. xfrm_state_put() queues GC work 2. xfrm_iptfs unloads later 3. xfrm_state_gc_task runs 4. GC dereferences stale x->mode_cbs This also covers the failed clone path where clone_state() returns before publishing mode_data. Validation reproduced this kernel report: Kernel panic - not syncing: Fatal exception CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y failslab_stacktrace_filter matched xfrm_iptfs frames ack_error=-12 FAULT_INJECTION: forcing a failure BUG: unable to handle page fault Workqueue: events xfrm_state_gc_task RIP: xfrm_state_gc_task+0x142/0x650 Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs] Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-19765 | 1 Eyaushev | 1 Swagger-testcase-mcp | 2026-08-14 | 6.3 Medium |
| A security flaw has been discovered in eyaushev swagger-testcase-mcp 5babb27c951fb404bc2b25ec80593616e49054e5. This vulnerability affects the function loadSource of the file src/utils/swagger-parser.ts of the component fetch_swagger. Performing a manipulation results in server-side request forgery. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-68293 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend the mcia_reg layout to 32 dwords. | ||||
| CVE-2026-7210 | 1 Python | 2 Cpython, Python | 2026-08-14 | 7.5 High |
| `xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch. | ||||
| CVE-2026-45853 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45864 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent infinite loops caused by the next valid being the same When processing valid within the range [valid : pos), if valid cannot be retrieved correctly, for example, if the retrieved valid value is always the same, this can trigger a potential infinite loop, similar to the hung problem reported by syzbot [1]. Adding a check for the valid value within the loop body, and terminating the loop and returning -EINVAL if the value is the same as the current value, can prevent this. [1] INFO: task syz.4.21:6056 blocked for more than 143 seconds. Call Trace: rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244 inode_lock include/linux/fs.h:1027 [inline] ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 | ||||
| CVE-2026-19758 | 1 Dromara | 1 Lamp-cloud | 2026-08-13 | 7.3 High |
| A vulnerability was determined in dromara lamp-cloud up to 5.10.0. This issue affects some unknown processing of the file FileChunkController.java of the component chunk-check endpoint. Executing a manipulation of the argument Name can lead to path traversal. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-46091 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: heed coherency rules In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately. | ||||
| CVE-2026-21034 | 3 Google, Samsung, Samsung Mobile | 3 Android, Auto, Samsung Auto | 2026-08-13 | 3.3 Low |
| Improper export of android application components in Samsung Auto prior to version 3.1.2.61 in Android 15 and 3.2.0.38 in Android 16 allows local attacker to change audio configuration. | ||||