Export limit exceeded: 409951 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409951 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72333 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix tx ident leak for commands without a response Commit 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident") changed ident allocation to use an IDA, releasing idents in l2cap_put_ident() when the matching response command is received. But identifiers allocated for commands that have no response defined are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for the lifetime of an LE CoC channel, so a peer streaming data to the host exhausts the 1-255 ident range after 254 credit packets. From then on l2cap_get_ident() fails: kernel: Bluetooth: Unable to allocate ident: -28 and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0, which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling identifier 0x00 is an invalid identifier and shall never be used in any command"). Remote stacks that validate the ident drop these commands, never receive new credits, and the channel stalls permanently. With default socket buffers this happens after roughly 0.5 MB of received data (the exact amount depends on the socket receive buffer): < ACL Data TX: Handle 2048 flags 0x00 dlen 12 LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4 Source CID: 64 Credits: 1 Release the ident immediately after sending L2CAP_LE_CREDITS since no response will ever release it. Use a local variable instead of chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on (e.g. a pending reconfigure) is not overwritten by a credit packet. Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released when the response arrives. | ||||
| CVE-2026-72338 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload There is a TOCTOU race condition in flower lockless approach between sizing a flow_rule buffer and filling it. zdi-disclosures@trendmicro.com reports: The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED (fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the independent locking domains make the race reachable in practice. KASAN confirms: BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930 Write of size 4 at addr ffff888001f27520 by task poc-toctou/312 The buggy address is located 0 bytes to the right of allocated 288-byte region [ffff888001f27400, ffff888001f27520) (cache kmalloc-512) Note: The result is a heap OOB write attacker-controlled content into the adjacent slab object (requires CAP_NET_ADMIN). The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys(). Additionally we close the remaining TOCTOU window between the sizing read and the fill reads by more careful accounting. Rather than silently truncating the key count, which leads to incorrect action semantics offloaded to hardware and secondary OOB writes if the remaining capacity is zero or consumed by prior actions, we enforce remaining capacity checks and return -ENOSPC if the required space exceeds the remaining capacity. | ||||
| CVE-2026-70911 | 1 Oracle | 1 Hyperion Financial Management | 2026-08-22 | 5.3 Medium |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). | ||||
| CVE-2026-70920 | 1 Oracle | 1 Hyperion Financial Management | 2026-08-22 | 9.9 Critical |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via SQL to compromise Oracle Hyperion Financial Management. While the vulnerability is in Oracle Hyperion Financial Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Financial Management. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). | ||||
| CVE-2026-70924 | 1 Oracle | 1 Web Services Manager | 2026-08-22 | 8.1 High |
| Vulnerability in the Oracle Web Services Manager product of Oracle Fusion Middleware (component: Web Services Security). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Web Services Manager. Successful attacks of this vulnerability can result in takeover of Oracle Web Services Manager. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-70893 | 1 Oracle | 1 Hyperion Data Relationship Management | 2026-08-22 | 8.2 High |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows low privileged attacker with network access via SQL to compromise Oracle Hyperion Data Relationship Management. While the vulnerability is in Oracle Hyperion Data Relationship Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:N). | ||||
| CVE-2026-70922 | 1 Oracle | 1 Financial Services Enterprise Case Management | 2026-08-22 | 8.8 High |
| Vulnerability in the Oracle Financial Services Enterprise Case Management product of Oracle Financial Services Applications (component: Web UI). Supported versions that are affected are 8.0.8.2 and 8.1.2.11. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Financial Services Enterprise Case Management. Successful attacks of this vulnerability can result in takeover of Oracle Financial Services Enterprise Case Management. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-70925 | 1 Oracle | 1 Hyperion Financial Management | 2026-08-22 | 8.1 High |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via SQL to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Financial Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-70926 | 1 Oracle | 1 Workflow | 2026-08-22 | 9.8 Critical |
| Vulnerability in the Oracle Workflow product of Oracle E-Business Suite (component: Workflow Notification Mailer). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via SMTP to compromise Oracle Workflow. Successful attacks of this vulnerability can result in takeover of Oracle Workflow. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-70927 | 1 Oracle | 1 Workflow | 2026-08-22 | 7.5 High |
| Vulnerability in the Oracle Workflow product of Oracle E-Business Suite (component: Workflow Notification Mailer). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Workflow. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Workflow. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). | ||||
| CVE-2026-70930 | 1 Oracle | 1 Order Management | 2026-08-22 | 7.5 High |
| Vulnerability in the Oracle Order Management product of Oracle E-Business Suite (component: Product Diagnostic Tools). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Order Management. Successful attacks of this vulnerability can result in takeover of Oracle Order Management. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-72364 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writeback error handling Fix the error handling in writeback_iter() loop. If an error occurs, writeback_iter() needs to be called again with *error set to the error so that it can clean up iteration state. Further, the current folio needs unlocking and redirtying. | ||||
| CVE-2026-72375 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix reinitialisation of the inode, in particular ->lock_work It seems that initalising afs_vnode::lock_work a single time in the slab's init function isn't sufficient for work_structs. This results in the DEBUG_OBJECTS debugging stuff producing a warning occasionally when running the generic/131 xfstest: ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220 WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695 ... CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT ... RIP: 0010:debug_print_object+0x65/0x90 ... Call Trace: <TASK> ? __pfx_afs_lock_work+0x10/0x10 debug_object_activate+0x122/0x170 insert_work+0x25/0x60 __queue_work+0x2e0/0x340 queue_delayed_work_on+0x48/0x70 afs_fl_release_private+0x57/0x70 locks_release_private+0x5c/0xa0 locks_free_lock+0xe/0x20 posix_lock_inode+0x55f/0x5b0 locks_lock_inode_wait+0x81/0x140 ? file_write_and_wait_range+0x50/0x70 afs_lock+0xcd/0x110 fcntl_setlk+0x10d/0x260 do_fcntl+0x24e/0x5b0 __do_sys_fcntl+0x6a/0x90 do_syscall_64+0x11e/0x310 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fix this by reinitialising ->lock_work after allocating an inode. Also, flush ->lock_work when the inode is being evicted to make sure it's not still running. | ||||
| CVE-2026-72383 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix addr_wq_timer race in sctp_free_addr_wq() sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete() while holding addr_wq_lock. However, timer_delete() does not guarantee that a currently running timer handler has completed. This allows a race with sctp_addr_wq_timeout_handler(), where the handler may still run after addr_waitq has been freed, acquire addr_wq_lock, and access freed memory, leading to a use-after-free. Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This guarantees that any in-flight timer handler has finished and prevents the timer from being re-armed during teardown, making subsequent cleanup safe. | ||||
| CVE-2026-70898 | 1 Oracle | 1 Hyperion Data Relationship Management | 2026-08-22 | 7.4 High |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-70900 | 1 Oracle | 1 Hyperion Data Relationship Management | 2026-08-22 | 8.7 High |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. While the vulnerability is in Oracle Hyperion Data Relationship Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 8.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:N). | ||||
| CVE-2026-72340 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap: fix races on the shared Super VCAP block The VCAP instances on a chip are not independent, yet they are locked independently. On sparx5 and lan969x the IS0 and IS2 instances are backed by the same Super VCAP hardware block and share its cache and command registers: every access drives the shared VCAP_SUPER_CTRL register and moves data through the shared cache registers. Accessing one instance therefore races with accessing another. The per-instance admin->lock cannot prevent this, as each instance takes a different lock. The locking issue is mostly disguised by the fact that the core usage of the vcap api runs under rtnl. However, the full rule dump in debugfs decodes rules straight from hardware (a READ command followed by a cache read) and runs outside rtnl, so it races a concurrent tc-flower rule write to another Super VCAP instance. Besides corrupting the dump, the read repopulates the shared cache between the writers cache fill and its write command, so the writer commits the wrong data and corrupts the hardware entry. Introduce vcap_lock() and vcap_unlock() helpers and route every rule lock site in the VCAP API and its debugfs code through them. Replace the per-instance admin->lock with a single mutex in struct vcap_control that serializes access to all instances. The helpers reach it through a new admin->vctrl back-pointer, and the clients initialise and destroy the control lock instead of a per-instance one. No path holds more than one instance lock, so collapsing them onto a single mutex cannot self-deadlock. | ||||
| CVE-2026-72353 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in fallocate ntfs_attr_fallocate() allocates holes and delayed allocations inside initialized size by looking up the current runlist element under ni->runlist.lock. The returned struct runlist_element is only a borrowed pointer into ni->runlist.rl. A writer can replace and free that array after the read lock is dropped, so later reads of rl->lcn, rl->length and rl->vcn can touch freed memory. The buggy scenario involves two paths, with each column showing the order within that path: ntfs_attr_fallocate(): 1. Take ni->runlist.lock for read. 2. Get rl from ntfs_attr_find_vcn_nolock(). 3. Drop ni->runlist.lock. 4. Read rl->lcn, rl->length and rl->vcn. mmap page_mkwrite: 1. Enter ntfs_filemap_page_mkwrite(). 2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster(). 3. Merge allocation state with ntfs_runlists_merge(). 4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_attr_fallocate+0xbb8/0xd00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_attr_fallocate+0xbb8/0xd00 kasan_report+0xe0/0x110 ? ntfs_attr_fallocate+0xbb8/0xd00 ntfs_attr_fallocate+0xbb8/0xd00 ? lock_acquire+0x2b8/0x2f0 ? __pfx_ntfs_attr_fallocate+0x10/0x10 ? 0xffffffffc0000095 ? down_write+0x10d/0x1e0 ntfs_fallocate+0x5c9/0x1d00 ? __pfx_ntfs_fallocate+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? selinux_file_permission+0x3a7/0x510 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 ? do_syscall_64+0x81/0x6a0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 410: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3f/0x110 ntfs_runlists_merge+0xaa3/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 ntfs_attr_fallocate+0x53f/0xd00 ntfs_fallocate+0x5c9/0x1d00 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 424: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x307/0x580 ntfs_rl_realloc+0x6f/0x110 ntfs_runlists_merge+0x7b1/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 __ntfs_write_iomap_begin+0x8cd/0x2280 iomap_iter+0x6de/0x11e0 iomap_page_mkwrite+0x391/0x650 ntfs_filemap_page_mkwrite+0x1ac/0x400 do_page_mkwrite+0x15c/0x280 __handle_mm_fault+0xd6d/0x1ca0 handle_mm_fault+0x19c/0x470 do_user_addr_fault+0x23b/0x9c0 exc_page_fault+0x5c/0xc0 asm_exc_page_fault+0x26/0x30 Fix this by copying the needed runlist fields while the read lock is still held and using only those scalar snapshots after unlocking. After the snapshot, ntfs_attr_map_cluster() can also find that the range is already mapped and return balloc=false. Only call ntfs_dio_zero_range() when new clusters were allocated, matching the write iomap path and preserving the zero-newly-allocated-holes behavior. | ||||
| CVE-2026-72354 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in MFT writeback ntfs_write_mft_block() maps each $MFT record through the $MFT data runlist. For sub-folio clusters it looks up a struct runlist_element under ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn when choosing folio_sz. That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT allocation extension can merge a replacement runlist under the same lock, and ntfs_rl_realloc() can free the old backing array. If that happens between the lookup and the later folio_sz decision, writeback can dereference freed runlist storage. The buggy scenario involves two paths, with each column showing the order within that path: MFT writeback path: $MFT allocation extension: 1. Look up rl under 1. Extend the $MFT data allocation. ni->runlist.lock. 2. Publish a replacement runlist. 2. Drop ni->runlist.lock. 3. Free the old runlist array. 3. Read rl->length and rl->vcn to choose folio_sz. Compute the remaining run length while ni->runlist.lock is still held, and use that scalar after unlock. This preserves the existing folio sizing decision without carrying a borrowed runlist_element across the lock boundary. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_mft_writepages+0x1c8d/0x1fb0 kasan_report+0xe0/0x110 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ntfs_mft_writepages+0x1c8d/0x1fb0 ? __pfx_ntfs_mft_writepages+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? iput+0x92/0xa80 do_writepages+0x219/0x530 ? __pfx_do_writepages+0x10/0x10 __writeback_single_inode+0x117/0xf50 ? do_raw_spin_lock+0x130/0x270 ? __pfx_do_raw_spin_lock+0x10/0x10 ? __pfx___writeback_single_inode+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 writeback_sb_inodes+0x65b/0x1810 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? __pfx_writeback_sb_inodes+0x10/0x10 ? lock_release+0x1e0/0x280 ? _raw_spin_unlock+0x23/0x40 ? move_expired_inodes+0x2b8/0x850 __writeback_inodes_wb+0xf4/0x270 ? __pfx___writeback_inodes_wb+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_io+0x2e4/0x410 wb_writeback+0x666/0x880 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_wb_writeback+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? get_nr_dirty_inodes+0x1c/0x170 wb_workfn+0x75e/0xbb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x27/0x60 ? __pfx_wb_workfn+0x10/0x10 ? __pfx_debug_object_deactivate+0x10/0x10 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0x1e0/0x280 process_one_work+0x8d0/0x1870 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x575/0xf80 ? __pfx_worker_thread+0x10/0x10 kthread+0x2e7/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x576/0x810 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x57e/0xe10 ? __switch_to_asm+0x33/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 970: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3c/0x80 ntfs_runlists_merge+0x1212/0x3010 ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40 ntfs_mft_record_alloc+0x1ab4/0x4f10 __ntfs_create+0x680/0x2e50 ntfs_create+0x1e6/0x3a0 path_openat+0x2b55/0x3c10 do_file_open+0x1f4/0x460 do_sys_openat2+0xde/0x170 __x64_sys_openat+0x122/0x1e0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1294: kasan_save_ ---truncated--- | ||||
| CVE-2026-72357 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline In the unregister path we use __in_uprobe_trampoline check with current->mm for the VMA lookup, which is wrong, because we are in the tracer context, not the traced process. Add mm_struct pointer argument to __in_uprobe_trampoline and changing related callers to pass proper mm_struct pointer. | ||||