Export limit exceeded: 409359 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25326 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90302 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: synchronize heartbeat callbacks with o2net teardown Patch series "ocfs2: harden heartbeat teardown races". This series fixes two OCFS2 heartbeat/o2net teardown races found by KASAN. This patch (of 2): Heartbeat callbacks stay registered while configfs local-node teardown enters o2net_stop_listening(). A node-down event can still run through o2net_disconnect_node() and o2net_set_nn_state() while teardown is destroying o2net_wq, so the later queue/flush operations can hit a dead workqueue. KASAN has caught this as a slab-use-after-free in __queue_work() with the call chain: KASAN slab-use-after-free in __queue_work+0x56/0xa90 Read of size 4 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __queue_work+0x56/0xa90 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __queue_delayed_work+0x58/0x1e0 queue_delayed_work_on+0xb4/0xc0 o2net_set_nn_state+0x467/0x840 o2net_disconnect_node+0x7b/0xe0 o2net_hb_node_down_cb+0x54/0x60 o2hb_run_event_list+0x236/0x2d0 o2hb_check_slot+0xad4/0xbc0 lock_release+0xc8/0x290 o2hb_check_slot+0x9ea/0xbc0 trace_hardirqs_on+0x18/0x130 o2hb_do_disk_heartbeat+0x646/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079) __lock_acquire+0x466/0x2260 lockdep_hardirqs_on_prepare+0xea/0x1a0 ktime_get_with_offset+0xe9/0x230 o2hb_thread+0x14e/0x770 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 __switch_to+0x2e9/0x730 ret_from_fork_asm+0x1a/0x30 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_noprof+0x292/0x760 __alloc_workqueue+0x736/0xc60 alloc_workqueue_noprof+0xb1/0x110 o2net_start_listening+0xe5/0x430 o2nm_node_local_store+0x184/0x310 configfs_write_iter+0x18a/0x210 vfs_write+0x469/0x810 ksys_write+0xd2/0x170 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 rcu_core+0x4f4/0x1320 handle_softirqs+0x156/0x660 queue_delayed_work_on o2net_set_nn_state o2net_disconnect_node o2net_hb_node_down_cb o2hb_run_event_list Keep heartbeat callbacks registered so quorum state still tracks node state, but stop them from driving o2net reconnect/disconnect work once local teardown starts. Mark the transport offline before destroying o2net_wq, wait for any in-flight heartbeat callback to finish, and delay bring-up replay until the new local node is published through o2nm_this_node(). The replay also has to stay serialized with heartbeat callback delivery. Otherwise a live-node snapshot can be copied, a real hb_down callback can install -ENOTCONN for a peer, and the stale replay can call o2net_hb_node_up() for that same peer and queue reconnect work even though heartbeat is already down. The buggy scenario involves two paths, with each column showing the order within that path: local-node teardown: heartbeat node-down callback: 1. configfs local-off enters 1. o2hb_run_event_list() invokes o2net_stop_listening(). o2net_hb_node_down_cb(). 2. teardown heads for 2. the callback reaches destroy_workqueue(o2net_wq). o2net_disconnect_node() and o2net_set_nn_state(). 3. teardown destroys and NULLs 3. the callback flushes or queues o2net_wq. work through o2net_wq. | ||||
| CVE-2026-90341 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: coreboot: Validate table bounds The existing coreboot_table_populate() bounds checks limit individual entries to the mapped length. However, coreboot_table_probe() replaces the platform resource length with header and table sizes supplied by firmware before mapping the full table. A malformed table can overflow the 32-bit size addition or advertise an extent beyond the resource, causing the driver to map and parse memory outside the resource. A resource shorter than the fixed header is also mapped as though it contained a complete header. Reject resources shorter than the fixed header. After validating the signature, require a complete header, calculate the advertised extent with overflow checking, and reject extents beyond the resource before remapping the table. | ||||
| CVE-2026-90224 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix double completion race in nci_data_exchange_complete nci_close_device() and nci_rx_work can both call nci_data_exchange_complete() concurrently. After commit 4527025d440ce8 ("nfc: nci: fix circular locking dependency in nci_close_device") moved flush_workqueue(ndev->rx_wq) after mutex_unlock(&ndev->req_lock), rx_work is no longer serialized with the explicit completion call in the close path. Both callers read the non-NULL callback pointer and invoke rawsock_data_exchange_complete(), which calls sock_put() -- but only one sock_hold() was taken, so the second sock_put() underflows the refcount and frees the socket while it is still in use. Replace the bare clear_bit(NCI_DATA_EXCHANGE) with test_and_clear_bit() so that only the first caller proceeds to invoke the callback. | ||||
| CVE-2026-90226 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: avoid userspace overflow on invalid optlen nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so the kernel always stores 4 bytes regardless of the caller-supplied optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length reported back to userspace; it does not constrain the store. A call with optlen < 4 therefore writes past the user buffer, violating the getsockopt(2) contract for all five supported optnames. Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a plain size comparison would promote a negative optlen to size_t and slip past the check; an explicit 'len < 0' test is added first to catch negative values before the size compare. | ||||
| CVE-2026-90232 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: amt: Don't support cross-netns setup. When a lower device is unregistered, amt_device_event() tries to unregister its upper AMT device, but it has two problems. 1. amt_lookup_upper_dev() looks up an upper device in the lower device's netns only 2. amt_device_event() unregisters a single upper device only If AMT device is created on a lower device in another netns, removing the lower device triggers the splat below and gets stuck until all upper devices are removed. [0] The cross-netns setup seems unintentional considering 1. and the following points: * amt_link_setup() sets dev->netns_immutable to true * skb_scrub_packet() is not called in the fast path * iproute2 binary fails to find cross-netns lower device via link-netns: # ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1 Cannot find device "veth1" Instead of supporting it properly and preparing for per-netns netdev unreg, let's forbid cross-netns setup. Note that the problem 2. needs a separate fix. [0]: WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031 Modules linked in: CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518) Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f RSP: 0018:ffffc90004abf160 EFLAGS: 00010212 RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880 RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10 R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08 R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000 FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0 Call Trace: <TASK> rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674) rtnetlink_rcv_msg (net/core/rtnetlink.c:7112) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1319) netlink_sendmsg (net/netlink/af_netlink.c:1900) ____sys_sendmsg (net/socket.c:775) __sys_sendmsg (net/socket.c:2738) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... unregister_netdevice: waiting for veth0 to become free. Usage count = 7 ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at __netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791) __netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963) netdev_upper_dev_link (net/core/dev.c:9009) amt_newlink (drivers/net/amt.c:3321) | ||||
| CVE-2026-90376 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix MLD ID in MAC TXD and HIF TXP Problem: MCU command timeout while the firmware state is normal, and the firmware keeps showing the error log "ERROR!! NO PAUSE...". Root cause: If the MLD_ID field in the TXD is neither the primary link id nor the secondary link id, it may lead to a firmware busy loop when the third link is in power saving mode. Remap frames directed to a third link to the primary link wcid. Since TX status events and txfree completions carry the wcid the firmware saw, use the remapped wcid for packet id tracking and non-AQL packet accounting as well, while the frame keeps its original link context for addressing, band and OMAC selection. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90244 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Restore locking around msi_page_list Unlike a group's default domain, which is always freshly allocated and privately owned (iommu_group_alloc_default_domain()), VFIO type1's legacy container merges any newly attached group into an existing domain whenever their iommu_ops and cache-coherency enforcement match. iommu_dma_get_msi_page() only asserts the caller's own group mutex is held (iommu_group_mutex_assert()). On an IOMMU that publishes IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned through the legacy container can have their guest drivers probe and allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands on a different device fd and group mutex, but both devices' domains are the same merged domain, so both can enter iommu_dma_get_msi_page() concurrently and corrupt msi_page_list. commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a generic operation") dropped the prior msi_prepare_lock on the reasoning that "each iommu_domain is unique to a group," which holds for default domains but not this VFIO type1 case. Restore the static lock, since it's only guarding a corner case and will likely never be contended. iommufd avoids the equivalent problem by having its own callers (iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever reaching the shared list. VFIO type1 can't mirror that since it dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. | ||||
| CVE-2026-90245 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates are computed from the viewport origin and dimensions using 32-bit unsigned arithmetic. Large input values can cause these calculations to wrap around before the resulting coordinates are passed to SetOverlayViewPort(). SetOverlayViewPort() packs the viewport coordinates into 16-bit register fields. The X coordinates are additionally adjusted by +2 and +1 before being written. Validate the coordinate calculations for 32-bit wraparound and ensure that the adjusted coordinates fit within their 16-bit register fields before calling SetOverlayViewPort(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-90248 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix teardown of an adopted proto on insert-race loss In tc_new_tfilter() the create branch sets tp_created = 1 before calling tcf_chain_tp_insert_unique(). When the caller loses the race (another request inserted a proto at the same chain/prio first), insert_unique() destroys the caller's own tp_new and returns the winner's proto with an extra reference. tp_created was never cleared, so the loser's errout path treated the winner's live proto as its own and called tcf_chain_tp_delete_empty() on it, silently unlinking an active classifier that the winning request already advertised via RTM_NEWTFILTER. Track the outcome of the insert step in a single tri-state variable so each errout path reacts correctly: - TP_NOT_CREATED: no proto created; pursue the old path. - TP_CREATED: proto inserted successfully; same code path as before. - TP_NOT_OWNED: New - lost the insert race; tp is another request's proto (chain ref already released by tp_new's destroy) Both errout reactions are single expressions derived from the state. This fix is motivated by the Sashiko's automated review of Patch (net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers) [1][2]. The review identified the silent-unlink behaviour of an adopted proto's teardown when a request loses the tcf_chain_tp_insert_unique() race. [1] https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com [2] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com | ||||
| CVE-2026-90249 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes The IIO core does not filter duplicate writes to the event enable attribute, so writing the same value twice invokes write_event_config() twice. Enabling twice leaks a runtime PM reference, preventing the device from ever suspending again; disabling twice underflows the usage count and triggers a "Runtime PM usage count underflow" warning. Bail out early when the requested state matches the current state. While at it, switch to pm_runtime_resume_and_get() so a failed resume is propagated to userspace instead of silently marking the event enabled. | ||||
| CVE-2026-90268 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix error handling in sd_probe() after large pool creation failure After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create() failure must unregister disk_dev and let scsi_disk_release() free sdkp. Going through out_free_index kfree()s an already registered device and leaks the sysfs entry. | ||||
| CVE-2026-90305 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard IRQ context. On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping sighand->siglock: BUG: sleeping function called from invalid context at spinlock_rt.c:48 rt_spin_lock from lock_task_sighand lock_task_sighand from run_posix_cpu_timers run_posix_cpu_timers from update_process_times ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M. ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support"), so the select need not be conditional on KVM. Select it to defer POSIX CPU timer expiry to task context. Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers created with timer_create(). | ||||
| CVE-2026-90307 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes nothing to srp_process_cred_req() and srp_process_aer_req(), which read fixed-size fields from the receive buffer without checking that those fields were received. The buffer size is max_ti_iu_len, which comes from the login response and is not validated. A target that advertises 8 and then sends an 8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent back, so those bytes reach the target. SRP_AER_REQ behaves the same way and also reads req->lun. The leak is 8 bytes per response. max_ti_iu_len also decides which slab cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and the read is entirely outside it: BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0 Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 8-byte region [ffff888104714da0, ffff888104714da8) Without KASAN the returned bytes are whatever is next in the slab. One run returned ".strtab". rsp->data[3] in srp_process_rsp() has the same problem: only resp_data_len is checked before it is read. Drop a request that is shorter than the structure being parsed, and check byte_len before the tsk_mgmt read. | ||||
| CVE-2026-90320 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0x610 listxattr+0x90/0xe0 path_listxattrat+0xed/0x220 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-90266 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't force read-only on transient -EAGAIN from reloc merge On a zoned FS, btrfs_delayed_refs_rsv_refill() returns -EAGAIN whenever the over-committed metadata plus the zone_unusable bytes exceeds the usable size in a metadata block-group to avoid heavy over-commit of metadata and early ENOSPC in one transaction. If this happens while doing reclaim, the transaction is getting aborted. Treat -EAGAIN as a soft, retryable condition in case of block-group reclaim. | ||||
| CVE-2026-90276 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: stop daemon timer rearm on destroy llbitmap_destroy() deletes pending_timer before flushing md_llbitmap_io_wq. However, daemon_work can still be queued or running after the timer has been deleted, and the daemon path can arm pending_timer again when it finds dirty chunks that are not ready to flush yet. If that happens during teardown, pending_timer can remain armed after llbitmap is freed and later dereference freed memory. Add a BITMAP_SHUTDOWN bit to llbitmap->flags, set it before deleting the timer, and make the timer and daemon paths stop queueing or rearming work once teardown starts. Cancel daemon_work before flushing the shared workqueue so no already queued daemon instance can race with the free. Use timer_shutdown_sync() so a daemon instance that passed the shutdown check before teardown cannot rearm the timer afterward. BITMAP_SHUTDOWN is a runtime-only state. Mask it out when reading and updating the llbitmap superblock so the shutdown state is never loaded from disk or persisted to disk. | ||||
| CVE-2026-90329 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: synchronize input before cleaning up a failed probe hid_device_io_start() allows reports to run concurrently with probe. If the probe subsequently fails, __hid_device_probe() releases driver resources and clears hdev->driver without first excluding those report callbacks. For example, a report may enter hidraw_report_event() while the failure path frees the associated hidraw object, leading to a use-after-free when the report takes the object's list lock. Stop input before performing failed-probe cleanup. This reacquires driver_input_lock and waits for any report callback already in progress. | ||||
| CVE-2026-90349 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx() When mac80211 leaves the link unspecified, mt7996_tx() substitutes the primary link id of the station or vif. That value is IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added, and it is then used unchecked to index vif->link_conf[], mvif->mt76.link[] and sta->link[], all of which hold IEEE80211_MLD_MAX_NUM_LINKS (15) entries. Clamp the primary link id to the default link before using it, and use the clamped value for the link_sta fallback as well. | ||||
| CVE-2026-90360 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: use system_freezable_wq for init complete work schedule_delayed_work() uses system_wq, which is non-freezable, allowing regulator_init_complete_work to run concurrently with system suspend. This work fires ~30s after boot to disable unused regulators via I2C. When it races with PM suspend, the I2C adapter may already be suspended, triggering a -ESHUTDOWN warning in __i2c_transfer(): WARNING: ... at __i2c_transfer+0x36c/0x3c8 Call trace: __i2c_transfer i2c_transfer regmap_i2c_write _regmap_update_bits regulator_disable_regmap _regulator_do_disable regulator_late_cleanup regulator_init_complete_work_function process_one_work Switch to system_freezable_wq so the work is frozen before any device is suspended, eliminating the race. | ||||