Export limit exceeded: 378145 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378145 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72480 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case. | ||||
| CVE-2026-72479 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: handle I2C read error(s) in mma8452_read() Currently, If i2c_smbus_read_i2c_block_data() fails but mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0. As a result, the caller mma8452_read_raw() assumes the read was successful and proceeds to use a buffer containing uninitialized stack memory. Add proper checking of the I2C read return value and propagate errors to the caller. | ||||
| CVE-2026-72478 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: add bounds check to run_get_highest_vcn() run_get_highest_vcn() parses a packed NTFS mapping-pairs buffer without any length bound, relying solely on a 0x00 terminator to stop. A crafted $LogFile UpdateMappingPairs record whose embedded attribute contains mapping-pairs runs without a terminator causes the function to read past the slab allocation, triggering a KASAN slab-out-of-bounds read on mount. The sibling function run_unpack() received an analogous bounds-check in commit b62567bca474 ("ntfs3: add buffer boundary checks to run_unpack()"), but run_get_highest_vcn() was missed. Take a run_buf_size parameter and reject any run header whose payload would extend past the buffer end, mirroring the pattern used by run_unpack(). The caller in fslog.c passes the remaining attribute bytes after the mapping-pairs offset. KASAN report (on mainline v7.1 merge window HEAD): BUG: KASAN: slab-out-of-bounds in run_get_highest_vcn+0x3c0/0x410 Read of size 1 at addr ffff88800e2d5400 by task mount/72 Call Trace: run_get_highest_vcn+0x3c0/0x410 do_action.isra.0+0x3ba8/0x7b50 log_replay+0x9ddd/0x10200 ntfs_loadlog_and_replay+0x4ad/0x610 ntfs_fill_super+0x214a/0x4540 | ||||
| CVE-2026-72477 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: call _ntfs_bad_inode() when failing to rename It is safe to call _ntfs_bad_inode on live inodes since: commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.") The WARN_ON was added when it wasn't safe by: commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails") Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further operations on the inconsistent inode. | ||||
| CVE-2026-72476 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix possible use after free In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check. | ||||
| CVE-2026-72475 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc Use axi_dmac_free_desc() to free fully the descriptor at fail path when call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec(). | ||||
| CVE-2026-72474 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor For architectures like Microblaze or arm64 (where this IP is used), DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might remap (and hence vmalloc()) some memory. This became visible in a design where dma_direct_use_pool() is not possible. With the above, when calling dma_free_coherent(), vunmap() would be called from softirq context and thus leading to a BUG(). To fix it, use a dma pool that is allocated in .device_alloc_chan_resources() and allocate blocks from it. The key point is that now dma_pool_free() is used in axi_dmac_free_desc() to free the blocks and that just frees the blocks from the pool in the sense they can be used again. In other words, no actual call to dma_free_coherent() happens. That only happens when destroying the pool in axi_dmac_free_chan_resources() which does not happen in any interrupt context. | ||||
| CVE-2026-72473 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decouple req recycling from RPC completion rl_kref formerly served two distinct lifetimes through a single refcount: it gated when a Reply could wake its RPC task, and it gated when an rpcrdma_req could return to its free pool. The marshal path took the Send-side reference only when SGEs needed DMA-unmap (sc_unmap_count > 0), which made a Send carrying only pre-registered buffers an exception: the Reply handler dropped rl_kref from 1 to 0 and freed the req while the HCA might still be DMA-reading from its send buffer. Give rl_kref a narrower job. The RPC layer takes one reference when slot allocation hands a req out. rpcrdma_prepare_send_sges() takes a Send-side reference unconditionally after WR preparation succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop the RPC-layer reference; rpcrdma_sendctx_unmap() drops the Send-side reference. The req returns to its free pool only after both owners have signed off. The existing kref_init(&req->rl_kref) call in rpcrdma_prepare_send_sges() is removed. Initialization moves to the slot-allocation paths (xprt_rdma_alloc_slot and rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref before the req returns to a free pool. A re-init in the marshal path would discard the RPC-layer reference that already exists on entry. Three invariants follow: - Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1. xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the backlog-wake branch in xprt_rdma_alloc_slot() each kref_init rl_kref before publishing the req. Without this invariant, an RPC task that aborts between slot allocation and marshal (gss_refresh failure or signal during call_connect, for example) would drive xprt_release() -> xprt_rdma_free_slot() -> kref_put against a refcount of zero, saturating refcount_t and stranding the slot. - The Send-side reference is taken only after WR prep succeeds. A mapping failure in rpcrdma_prepare_send_sges() runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx and clears sc_req without touching rl_kref. The sendctx ring walks in rpcrdma_sendctx_put_locked() and rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL, so a burst of -EIO marshal failures cannot hold reqs off rb_send_bufs. - The release callback re-arms rl_kref so the next consumer enters with the invariant satisfied. Replies now complete the RPC directly. rpcrdma_reply_handler() calls rpcrdma_complete_rqst() in place of kref_put on the non-LocalInv branch. The LocalInv branch already completes the RPC from frwr_unmap_async() and is unaffected. Because Send-side references can now outlive RPC completion, connection teardown drains sendctx entries whose unsignaled Sends never had a later signaled completion to walk the ring. rpcrdma_sendctxs_destroy() walks the active range and runs rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req before the request buffers are reset, and is moved ahead of rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs are still in their pre-reset state when the Send-side refs are released. The drain creates a teardown-ordering hazard on the backchannel path. With the new lifetime, releasing a bc_prealloc req from rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has already emptied bc_pa_list, so the drained reqs would otherwise leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0) a second time after the disconnect to reclaim them. | ||||
| CVE-2026-72472 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfs: use nfsi->rwsem to protect traversal of the file lock list Lingfeng identified a bug and suggested two solutions, but both appear to have issues. Generally, we cannot release flc_lock while iterating over the file lock list to avoid use-after-free (UAF) problems with file locks. However, functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot adhere to this rule because recover_lock or nfs4_lock_delegation_recall may take a long time. To resolve this, NFS switches to using nfsi->rwsem for the same protection, and nfs_reclaim_locks follows this approach. Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead, this is inadequate since a single inode can have multiple nfs4_state instances. Therefore, the fix is to also use nfsi->rwsem in this case. Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), the functions nfs4_locku_done and nfs4_lock_done also break this rule because they call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding this protection could cause many deadlocks, so instead, the call to locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), it has been resolved after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering state recovery") because all slots are drained before calling nfs4_do_reclaim, which prevents concurrent stateid changes along this path. Also, nfs_delegation_claim_locks does not cause this concurrency either since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is sent, so nfs4_lock_done is not called. Therefore, nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first time the stateid is set. | ||||
| CVE-2026-72471 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent potential lcn remains uninitialized The target VCN being sought was not found within runs[0], causing run_lookup() to return false. This causes run_lookup_entry() to return false, which in turn results in a len value of 0, and the new parameter passed to attr_data_get_block() is NULL. Collectively, these factors ultimately cause attr_data_get_block_locked() to exit prematurely without initializing lcn, thereby triggering [1]. To prevent [1], the clen check within ni_seek_data_or_hole() has been moved to occur before the lcn check. [1] BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862 ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862 ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530 vfs_llseek fs/read_write.c:391 [inline] | ||||
| CVE-2026-72470 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: resize log->one_page_buf when adopting on-disk page size log_replay() allocates log->one_page_buf using the page size that was chosen from the host PAGE_SIZE: log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); Later, when a restart area is found, the log page size recorded on disk is adopted: t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); if (log->page_size != t32) { log->l_size = log->orig_file_size; log->page_size = norm_file_page(t32, &log->l_size, t32 == DefaultLogPageSize); } If the on-disk page size is larger than the size used for the initial allocation, log->page_size grows but one_page_buf is left at its original, smaller size. A subsequent unaligned read_log_page() then reads log->page_size bytes into the undersized scratch buffer: page_buf = page_off ? log->one_page_buf : *buffer; err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf, log->page_size, NULL, &log->read_ahead); overflowing the allocation. This is reachable when mounting a dirty NTFS volume whose log was formatted with a page size larger than the buffer initially allocated on the mounting host (for example a 64K-log volume mounted on a host that allocated a 4K scratch buffer). Grow one_page_buf when the adopted on-disk page size exceeds the size used for the initial allocation. On krealloc() failure the original buffer is left intact and freed by the existing error path. | ||||
| CVE-2026-72469 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix ep kref imbalance on ADDR_CHANGE rpcrdma_cm_event_handler() falls through to the disconnected: label on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED. The kref then underflows during connect teardown and rpcrdma_xprt_disconnect() operates on a freed ep. Reference counts across a normal connection lifecycle: rpcrdma_ep_create() kref_init ->1 rpcrdma_xprt_connect() ep_get ->2 (before post_recvs) RDMA_CM_EVENT_ESTABLISHED ep_get ->3 RDMA_CM_EVENT_DISCONNECTED ep_put ->2 rpcrdma_xprt_drain() ep_put ->1 rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy) The connect-time get in rpcrdma_xprt_connect(), taken just before rpcrdma_post_recvs() "while there are outstanding Receives," is balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has no get to consume, so its put drops the count to 1 and the drain put then frees the ep while rpcrdma_xprt_disconnect() still holds a pointer to it. Fix by dispatching on the prior re_connect_status via xchg(): for prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with no put; for prev == 1 call rpcrdma_force_disconnect() and return. The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED event -- reliably delivered when rdma_disconnect() is called on a still-connected cm_id -- to balance the ESTABLISHED get; rpcrdma_xprt_drain() continues to balance only that connect-time get. Any other prior value means teardown is already in flight. | ||||
| CVE-2026-72468 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Initialize re_id before removal registration rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client before returning the new rdma_cm_id to rpcrdma_ep_create(). However rpcrdma_ep_create() currently stores that pointer in ep->re_id only after rpcrdma_create_id() returns. A local administrator can race an NFS/RDMA mount against RDMA device removal. If rpcrdma_remove_one() observes the just-registered notification before rpcrdma_ep_create() assigns ep->re_id, rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL). The tracepoint dereferences id->device->name and copies id->route.addr.dst_addr, so the callback can crash the kernel with a NULL pointer dereference. Store the rdma_cm_id in ep->re_id immediately before publishing ep->re_rn. The existing error path still destroys the id directly if registration fails; ep is then freed by the caller without using ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create(). | ||||
| CVE-2026-72467 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrdma_encode_write_list(), passes the NULL write-pad MR to encode_rdma_segment(), and dereferences it. This is locally triggerable on an NFS/RDMA client after a connect or reconnect hits a local MR allocation, DMA-map, MR-map, or post-send failure; a remote peer alone cannot force the local MR setup failure. Check the return value and fail the connect as -ENOTCONN, matching the adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the normal reconnect path retry. | ||||
| CVE-2026-72466 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()). | ||||
| CVE-2026-72465 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Sanitize the reply credit grant after parsing The out_norqst exit in rpcrdma_reply_handler() branches away before the credit clamp, so a reply that matches no pending request reaches out_post carrying the raw credit value parsed from the wire. rpcrdma_post_recvs() does not bound its @needed argument: the refill loop allocates and chains Receive WRs until the count is satisfied or allocation fails. A peer that sends a well-formed reply carrying an unknown XID and an inflated credit grant therefore drives rep allocation and Receive posting past re_max_requests on every such reply. Move the clamp to immediately after the credit field is parsed, ahead of the first branch that can reach out_post, so every later consumer sees a sanitized value. The cwnd update stays on the matched-request path. | ||||
| CVE-2026-72464 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf->rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted. | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-72462 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race. | ||||
| CVE-2026-72461 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference. | ||||