Export limit exceeded: 378623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378623 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74302 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix UAF in hci_unregister_dev() hci_unregister_dev() does not disable cmd_timer and ncmd_timer before the hci_dev structure is freed. If a timeout fires during device teardown, the callback dereferences freed memory (including the hdev->reset function pointer), leading to a use-after-free. Add disable_delayed_work_sync() calls alongside the existing disable_work_sync() calls to ensure both timers are fully quiesced before teardown proceeds. | ||||
| CVE-2026-74371 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | ||||
| CVE-2026-64865 | 2026-08-17 | N/A | ||
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.16, repeated PUT /api/user/self requests that update language or sidebar_modules can race relay billing because controller/user.go calls User.Update and updateUserCache performs a full RedisHSetObj write to user:.Quota, overwriting concurrent HINCRBY deductions and allowing an authenticated user to keep cached quota artificially high. This issue is fixed in version 1.0.0-rc.16. | ||||
| CVE-2026-11717 | 1 Google | 1 Mcp Toolbox For Databases | 2026-08-17 | 9.1 Critical |
| An authentication bypass vulnerability exists in the generic opaque token validation path (validateOpaqueToken) of googleapis/mcp-toolbox. When verifying an unparsed opaque token via an OAuth 2.0 introspection endpoint (RFC 7662), the toolbox decodes the response into an introspectResp struct where the Active field is declared as a pointer to a boolean (*bool). The code only explicitly rejects a token if the response contains a populated active field set to false (if introspectResp.Active != nil && !*introspectResp.Active). If an introspection endpoint responds with a payload that completely omits the mandatory active key, the internal variable remains nil, causing the conditional check to short-circuit. As a result, Toolbox accepts authorization tokens missing the "active" field, granting access to protected tools and underlying data sources. | ||||
| CVE-2026-62778 | 1 Microsoft | 14 Windows 10 1607, Windows 10 1809, Windows Server 2012 and 11 more | 2026-08-17 | 8.1 High |
| Use after free in Windows DNS allows an unauthorized attacker to elevate privileges over a network. | ||||
| CVE-2026-62787 | 1 Microsoft | 14 Windows 10 1607, Windows 10 1809, Windows Server 2012 and 11 more | 2026-08-17 | 7.5 High |
| Use after free in Windows DNS allows an authorized attacker to execute code over a network. | ||||
| CVE-2026-40144 | 2026-08-17 | N/A | ||
| A memory-corruption vulnerability exists in a kernel-mode component of BeyondTrust Endpoint Privilege Management (Windows deployments) prior to version 26.1.2. Insufficient validation of input processed by the component may result in memory being accessed outside its intended bounds. | ||||
| CVE-2026-62817 | 1 Microsoft | 18 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 15 more | 2026-08-17 | 8.8 High |
| Out-of-bounds write in Windows DNS allows an unauthorized attacker to execute code over an adjacent network. | ||||
| CVE-2026-11718 | 1 Google | 1 Mcp Toolbox For Databases | 2026-08-17 | 9.1 Critical |
| An authentication bypass vulnerability exists in the generic opaque token validation path (validateOpaqueToken) of googleapis/mcp-toolbox. When the toolbox validates an opaque token via an OAuth 2.0 introspection endpoint (RFC 7662), it decodes the response into an introspectResp struct. However, the subsequent claim-checking logic (validateClaims) evaluates the issuer condition as if a.issuer != "" && iss != "". If the external OAuth provider's introspection response omits the optional iss (issuer) field completely, the variable iss defaults to an empty string. This causes the conditional block to evaluate to false and be skipped silently. Consequently, the application accepts tokens issued by unauthorized or unintended third-party identity providers. | ||||
| CVE-2026-11788 | 1 Redhat | 10 389 Directory Server, Directory Server, Enterprise Linux and 7 more | 2026-08-17 | 5.9 Medium |
| A flaw was found in 389 Directory Server. The dereference control plugin does not check for allocation failure before using a BER structure, allowing an unauthenticated remote attacker to crash the LDAP server when the system is under memory pressure. | ||||
| CVE-2026-11770 | 2 Port389, Redhat | 11 389-ds-base, 389 Directory Server, Directory Server and 8 more | 2026-08-17 | 7.5 High |
| A flaw was found in 389 Directory Server. An unauthenticated remote attacker can inject LDAP search filters into the CleanAllRUV replication status-check extended operation. Because the handler performs the search against cn=config with elevated replication plugin privileges and returns a boolean match result, the attacker can extract sensitive server configuration metadata, including replication bind DNs and password storage scheme information. | ||||
| CVE-2026-15722 | 1 Redhat | 10 389 Directory Server, Directory Server, Enterprise Linux and 7 more | 2026-08-17 | 7.5 High |
| A stack buffer overflow flaw was found in 389 Directory Server (389-ds-base). The get_ruvelement_from_berval() function in repl5_ruv.c copies digit characters from a network-supplied RUV berval into a fixed 16-byte stack buffer without bounds checking. A remote unauthenticated attacker can crash the LDAP server by sending a crafted StartNSDS50ReplicationRequest extended operation containing a replica ID field with more than 16 digit characters. The overflow occurs during payload decoding, before any authorization check. Stack protectors limit impact to denial of service. | ||||
| CVE-2026-16975 | 1 Ibm | 1 I | 2026-08-17 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to a heap-based buffer overflow. | ||||
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||
| CVE-2026-72408 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(), which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT (gs->gro_hint). geneve_gro_complete() instead calls the low-level geneve_opt_gro_hint_off() and acts on the hint unconditionally. On a tunnel without the hint, receive aggregates the frames as plain ETH_P_TEB while complete still honours an attacker-supplied hint option: it inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch type, so the inner gro_complete handler runs at nhoff + gh_len, an offset receive never pulled nor validated, reading out of bounds of the skb head: BUG: KASAN: slab-out-of-bounds in ipv6_gro_complete (net/ipv6/ip6_offload.c:196) Read of size 1 at addr ffff88800fe91980 by task exploit/153 ipv6_gro_complete (net/ipv6/ip6_offload.c:196) geneve_gro_complete (drivers/net/geneve.c:965) udp_gro_complete (net/ipv4/udp_offload.c:940) inet_gro_complete (net/ipv4/af_inet.c:1621) __gro_flush (net/core/gro.c:306) Gate the complete path on gs->gro_hint too via geneve_sk_gro_hint_off(), so both paths agree. Tunnels that enable the hint are unaffected. | ||||
| CVE-2026-72409 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mvneta: re-enable percpu interrupt on resume On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules NAPI poll, which calls enable_percpu_irq() on completion to unmask. If suspend occurs while NAPI poll is pending (between disable_percpu_irq in the ISR and enable_percpu_irq in poll completion), the interrupt is never re-enabled: 1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule() => MPIC masked, percpu_enabled cpumask bit cleared 2. NAPI poll does not complete before suspend proceeds (on PREEMPT_RT this is highly likely since softirqs run in ksoftirqd which gets frozen; on non-RT it can happen when softirq processing is deferred to ksoftirqd) 3. mvneta_stop_dev => napi_disable(): cancels the pending poll without executing the completion path 4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC (already masked, but records IRQS_SUSPENDED) 5. Resume: mpic_resume checks irq_percpu_is_enabled() => false (bit was cleared in step 1) => skips unmask 6. mvneta_start_dev only restores device-level INTR_NEW_MASK, does not touch the MPIC per-CPU mask Result: MPIC per-CPU interrupt stays masked permanently. The NIC generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never receives them, causing complete loss of network connectivity. Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path to unconditionally unmask the MPIC per-CPU interrupt regardless of pre-suspend state. | ||||
| CVE-2026-72454 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are enabled or disabled, so that it always reflects the set of devices allowed to generate IBIs. Also update when IBIs are freed, to cover the corner case when an IBI is freed without first being disabled (e.g. oldedev in i3c_master_add_i3c_dev_locked()). Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new array, and add a lockdep assertion to enforce that hci->lock is held by callers. Demote a message in PIO and DMA IBI handling, from an error to a debug message, because there is a race window when the condition can arise normally. | ||||
| CVE-2026-72461 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference. | ||||
| CVE-2026-72466 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()). | ||||
| CVE-2026-72470 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: resize log->one_page_buf when adopting on-disk page size log_replay() allocates log->one_page_buf using the page size that was chosen from the host PAGE_SIZE: log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); Later, when a restart area is found, the log page size recorded on disk is adopted: t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); if (log->page_size != t32) { log->l_size = log->orig_file_size; log->page_size = norm_file_page(t32, &log->l_size, t32 == DefaultLogPageSize); } If the on-disk page size is larger than the size used for the initial allocation, log->page_size grows but one_page_buf is left at its original, smaller size. A subsequent unaligned read_log_page() then reads log->page_size bytes into the undersized scratch buffer: page_buf = page_off ? log->one_page_buf : *buffer; err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf, log->page_size, NULL, &log->read_ahead); overflowing the allocation. This is reachable when mounting a dirty NTFS volume whose log was formatted with a page size larger than the buffer initially allocated on the mounting host (for example a 64K-log volume mounted on a host that allocated a 4K scratch buffer). Grow one_page_buf when the adopted on-disk page size exceeds the size used for the initial allocation. On krealloc() failure the original buffer is left intact and freed by the existing error path. | ||||