Export limit exceeded: 14730 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14730 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97534 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: accurately adjust free_sections during free_segment_range In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs` to restrict block allocation to the safe remaining main area while valid blocks in the truncated range are evacuated by GC. However, FREE_I(sbi)->free_sections tracks the total number of free sections across the whole filesystem. If any sections within the truncated range were already free upon entering free_segment_range(), failing to deduct them from free_sections causes the filesystem to overestimate available free sections in the active, reduced main area. This leads to inconsistent free section accounting during GC data migration and can trigger unexpected allocation failures or assertion errors when space is tight. Fix this by calculating the number of already-free sections in the truncated range, deducting them from free_sections upon entering free_segment_range(), and restoring them on exit. | ||||
| CVE-2026-98104 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() falls back to returning max (htid | 0xFFF) when both idr_alloc_u32() ranges are full, instead of reporting an error. u32_change() trusts that value and inserts a new knode with a handle that is already live in the hash table, breaking handle uniqueness within the table's node ID space. The handle was never reserved in ht->handle_idr, so every later error path that does idr_remove(&ht->handle_idr, handle) removes the reservation of a different, live knode, which is then reused — one failed add compounds into further duplicates. The 4095 limit is per (table, bucket) — ht->handle_idr is per hash table and the range is derived from htid (bucketid), so a table with divisor 256 can legitimately hold 256*4095 knodes. The sibling helper gen_new_htid() has the same silent in-band failure: it returns 0 when the tp_c handle pool (1..0x7FF) is full, and u32_init() publishes the root hash table with handle 0 without checking. Two root tables with handle 0 alias in u32_lookup_ht(), allowing cross-tcf_proto knode add/lookup/delete. Add the same exhaustion check that the divisor path already has. Return an error so u32_change() fails with ENOSPC/ENOMEM when the node ID space is exhausted, and so u32_init() fails with -ENOMEM when the hash table ID space is exhausted. The extack message distinguishes pool exhaustion (-ENOSPC) from a transient allocation failure (-ENOMEM). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded) - Create a clsact qdisc on a device, then add 4095 u32 filters with auto-generated handles to fill the node ID space for the root hash table (single bucket). The 4096th auto-handle filter add triggers the duplicate handle (fh 800::fff reused). Reachable at Level 2 (unshare -Urn, namespace-local CAP_NET_ADMIN). - For gen_new_htid: create 2047 u32 proto entries on the same block to fill the tp_c handle pool, then create one more. The root table gets handle 0 and aliases with other handle-0 root tables. | ||||
| CVE-2026-98106 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated--- | ||||
| CVE-2026-98110 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length. | ||||
| CVE-2026-98147 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: printk: Don't WARN on kthread_run failure. Since __kthread_create_on_node() returns -EINTR upon SIGKILL, we should not use WARN_ON() in order to catch kthread_run() failure. | ||||
| CVE-2026-98135 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid sectors_per_cluster in the boot sector is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field with a range test that rejects 0x81..0xf3 but accepts 0 and other non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector(): sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1; ... vol->cluster_size = vol->sector_size << sectors_per_cluster_bits; ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the shift is undefined: UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39 shift exponent 4294967295 is too large for 32-bit type 'int' This change rejects any non-power-of-two value, since it feeds the aforementioned shift via ffs() - 1, which only yields the correct shift for a power of two. | ||||
| CVE-2026-98138 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place. | ||||
| CVE-2026-98139 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: only count successfully cleared runs when freeing clusters ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed whenever the error bookkeeping condition is false, which includes cases where ntfs_bitmap_clear_run() actually failed - e.g. a second run failing with the same errno as an earlier one, or any failure after a non-ENOMEM error was already recorded. Since a failed ntfs_bitmap_clear_run() rolls back its partial modifications, no bits were cleared for that run, yet its length still inflates vol->free_clusters, corrupting statfs output and the allocator's free space gate. Only count runs whose bitmap clear succeeded. | ||||
| CVE-2026-93230 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: initialize gigantic bootmem hugepage struct pages earlier Gigantic bootmem HugeTLB pages are currently initialized from hugetlb_init(), but page_alloc_init_late() runs earlier and walks pageblocks to determine zone contiguity. If a bootmem HugeTLB region is marked noinit, set_zone_contiguous() can observe still-uninitialized struct pages through __pageblock_pfn_to_page(). This may not trigger an immediate failure, but it can make set_zone_contiguous() compute the wrong zone contiguity state. If extra poisoned-page checks are added in this path, such as PF_POISONED_CHECK() in page_zone_id(), it can also trigger an early boot panic. Initialize gigantic bootmem HugeTLB struct pages from page_alloc_init_late(), before zone contiguity is evaluated, so later page allocator setup only sees valid struct page state. This also makes the initialization order more natural, as struct pages should be initialized before later code inspects them. | ||||
| CVE-2026-93231 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lockd: fix swapped arguments in nlmsvc_match_ip() When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip, nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server sockaddr as the opaque @data argument: nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL); The match callback is later invoked from nlm_traverse_locks() as: match(lockhost, host); where the first argument is the nlm_host that owns the lock, and the second argument is the @data that was originally passed down (here the server sockaddr). This is the convention every other match callback relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()): arg1 is the real nlm_host, arg2 is the caller-supplied reference value. nlmsvc_match_ip() has had these two arguments reversed ever since the unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd: unlock lockd locks associated with a given server ip"): return rpc_cmp_addr(nlm_srcaddr(host), datap); Here @host is actually the server sockaddr, so nlm_srcaddr(host) dereferences a struct sockaddr as a struct nlm_host and reads garbage at the offset of h_srcaddr; meanwhile @datap is actually the lock owner's nlm_host but is compared as a sockaddr. As a result the comparison practically never matches and locks are not released for the requested IP. Swap the arguments so the lock owner's source address is compared against the requested server address: return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host); [ cel: fix the misleading typedef parameter names too ] | ||||
| CVE-2026-93254 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit Currently, when exiting to kernel mode, we attempt involuntary preemption. The preemption logic expects IRQs to be disabled, which is why we call local_irq_disable() before attempting preemption. However, depending on the context, local_irq_disable() may be unnecessary: - __el1_irq(), the non-NMI EL1 IRQ path, already has IRQs disabled, so local_irq_disable() is redundant. - irqentry_exit_to_kernel_mode_preempt() immediately returns when exiting from an NMI-like context, so calling local_irq_disable() beforehand is unnecessary work. Furthermore, it confuses the pNMI state tracking when we are in a context with interrupts disabled and the GIC_PRIO_PSR_I_SET bit is set in the PMR, leading to a warning when CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y: WARNING: ./arch/arm64/include/asm/irqflags.h:63 at arm64_exit_to_kernel_mode+0xb8/0xc0, CPU#40: retsnoop/31805 CPU: 40 UID: 0 PID: 31805 Comm: retsnoop Not tainted 7.2.0-rc6-next-20260805 #7 PREEMPTLAZY pstate: 234013c9 (nzCv DAIF +PAN -UAO +TCO +DIT +SSBS BTYPE=--) pc : arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) lr : el1_abort (arch/arm64/kernel/entry-common.c:323) pmr: 000000f0 Call trace: arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) (P) el1_abort (arch/arm64/kernel/entry-common.c:323) el1h_64_sync_handler (arch/arm64/kernel/entry-common.c:449) el1h_64_sync (arch/arm64/kernel/entry.S:589) [...] Split arm64_exit_to_kernel_mode() into preempt, non-preempt, and dispatch parts so that we can avoid this extra work where it is not needed and avoid breaking the pNMI tracking logic. | ||||
| CVE-2026-98133 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: leave HasEA flag untouched on setxattr failure In ntfs_set_ea(), the exit path unconditionally updates the HasEA flag based on ea_info_qsize. When an error occurs before ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk EAs until the inode is evicted. Only update the flag on success. | ||||
| CVE-2026-93211 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: initialize DRC hash table before registering shrinker shrinker_register() precedes the INIT_LIST_HEAD loop and the drc_hashsize store. On weakly-ordered architectures (arm64, ppc), a shrinker scan can observe drc_hashsize before the bucket list heads are initialized, causing a NULL deref in the DRC shrinker callback. Move bucket initialization and the drc_hashsize store before shrinker_register() so the hash table is fully initialized before it becomes visible to the shrinker. | ||||
| CVE-2026-93217 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/madvise: skip device-private PMDs in cold and pageout walks madvise_cold_or_pageout_pte_range() takes pmd_trans_huge_lock(), whose pmd_is_huge() check returns true for a device-private PMD. The subsequent !pmd_present() branch has a VM_BUG_ON() asserting migration is the only allowed non-present case; a device-private PMD trips it. Skip device-private PMDs in that non-present branch and continue to huge_unlock before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so an unexpected PMD softleaf logs a warning rather than panicking. Drop the thp_migration_supported() guard: it expands to IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both pmd_is_migration_entry() and pmd_is_device_private_entry() already return false when that config is not selected, so the guard suppresses only the case where the warning would already be silent. Potential trigger: an HMM-based GPU driver races with madvise(MADV_COLD)/MADV_PAGEOUT: pmd_trans_huge(*pmd) reads true, then migrate_vma_pages() flips the PMD to a device-private entry before the PMD lock is acquired. | ||||
| CVE-2026-93235 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to zero post-EOF data when extending file size generic/794 4s ... - output mismatch (see /share/git/fstests/results//generic/794.out.bad) --- tests/generic/794.out 2026-06-12 08:46:32.766426241 +0800 +++ /share/git/fstests/results//generic/794.out.bad 2026-07-05 18:32:55.000000000 +0800 @@ -1,4 +1,16 @@ QA output created by 794 append_write +FAIL: non-zero data in gap [4080,4096) after shutdown+remount +000000 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a >ZZZZZZZZZZZZZZZZ< +* +001000 truncate_up ... (Run 'diff -u /share/git/fstests/tests/generic/794.out /share/git/fstests/results//generic/794.out.bad' to see the entire diff) Ran: generic/794 Failures: generic/794 Failed 1 of 1 tests Steps of generic/794: 1. write 4096 bytes to file w/ 0x5a 2. use fiemap to get PBA of first block in file 3. truncate file to 4080 4. umount; write 4096 bytes to file w/ 0x5a directly via PBA; mount 5. extend filesize via a) append 4096 from offset 4096, or b) truncate 8192, or c) fallocate 4096 from offset 4096 6. verify the gap is zeroed in memory [4080,4096) 7. sync range 4096 from offset 4096; shutdown -f (flush meta before shutdown) 8. umount; mount; verify [4080,4096) is zeroed or not. When extending file size (e.g. via truncate, fallocate, or write) across an unaligned EOF boundary, we need to ensure that post-EOF data in the partial page is zeroed out in pagecache and marked dirty, then writeback the cache to persist zeroed data before committing inode w/ updated i_size. This help to prevent stale disk data beyond the previous EOF from being exposed after remounting or crash recovery. Since f2fs is a LFS filesystem, we only support direct write via PBA in pinfile, and pinfile has section-aligned filesize, so in Android, there should no problem, but for other usage in different environment, let's fix this w/ fsync_mode=strict mount option. | ||||
| CVE-2026-93242 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb() qla24xx_process_response_queue() advances ring_ptr past the head IOCB before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr already points at the first continuation IOCB. The function however looped purex->entry_count times starting at ring_ptr. As entry_count includes the head, this consumed one entry too many: it stamped RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring past it, silently dropping a legitimate firmware response. The head IOCB's signature was also never marked. Mark the head processed and account for it, then consume only the entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer(). | ||||
| CVE-2026-93256 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: mask DAIF before restoring hibernated kernel The arm64 hibernate code manages the exception masking in an unsound way, leading to potential crashes and/or warnings during resume. When a hibernation image is saved in `swsusp_arch_suspend()`, all DAIF exceptions are masked (by virtue of `local_daif_save()`), and the suspended image is saved assuming that all DAIF exceptions will remain masked when the image is restored. When a hibernation image is resumed by `swsusp_arch_resume()`, only interrupts are masked (by virtue of `local_irq_disable()` in `resume_target_kernel()`). When pseudo-NMI is enabled the DAIF.IF bits will be clear, and regardless of pseudo-NMI the DAIF.DA bits will be clear. This means that there are two problems: (1) It is possible to take Debug, SError, or pseudo-NMI exceptions during the resume process. This is unsafe, as during the resume process both the old ane new kernels will tranisently be in an inconsistent state, and swsusp_arch_suspend_exit() won't retain an executable mapping of any exception vectors. Any exception taken here will be fatal and silent. (2) When re-entering the resumed kernel, some DAIF bits will be clear unexpectedly. This permits Debug, SError, or pseudo-NMI exceptions to be taken for a short period while the resumed kernel is not yet in a consistent state. This is detected by CONFIG_ARM64_DEBUG_PRIORITY_MASKING. Avoid these issues by masking all DAIF exceptions during resume. | ||||
| CVE-2026-93271 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate ath11k can receive HT/VHT/HE frames whose reported MCS is above the maximum that can be expressed in the corresponding mac80211 rate space (e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11). The frame itself is valid and decodes correctly, but for such a frame ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches mac80211 it trips the rate sanity check and the frame is dropped with a splat: ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12 WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211] Dropping the frame would discard otherwise valid data, so instead cap the reported MCS to the maximum the rate space can express and deliver the frame. Set rx_status->encoding before the range check and assign rate_idx from the capped value, so a frame with an out-of-range MCS no longer leaves partial or bogus rate metadata behind. Also downgrade the logging level since they are not treated as invalid frames now. The only loss is that such a frame is reported as the capped MCS in the rx rate statistics. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 | ||||
| CVE-2026-93223 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: tegra-video: fix of_node_put() on VIP parse errors tegra_vip_channel_of_parse() initializes np from dev->of_node without taking a reference, but its error paths drop one through the err_node_put label. This underflows the refcount of the VIP device's OF node when endpoint parsing fails on a malformed device tree. The only reference the function takes on np is the success-path of_node_get() stored in vip->chan.of_node, and that one is already released by the tegra_vip_init() error path and by tegra_vip_exit(). Return errors directly instead of jumping to the bogus cleanup label. | ||||
| CVE-2026-93228 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inherits the same rejection. pcl_alloc_write() also links each chunk onto the parsed chunk list before filling its segment array. If a future change weakens the segcount-0 rejection, an incomplete chunk is visible to consumers during the fill loop. Reorder so that list_add_tail() follows the segment fill loop, ensuring only fully-populated chunks appear on the list. | ||||