| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing authorization in Checkmk <2.5.0p12, <2.4.0p36, <2.3.0p50 and all 2.2.0 versions allows an authenticated user who knows the ID of a background job to view that job's status and results. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix group leader use-after-free after sibling detach
perf_group_detach() handles leader and sibling detach differently. When the
group leader is detached, all siblings are promoted to singleton events and
their group_leader pointer is reset to themselves. When a sibling is
detached, it is removed from the leader's sibling_list, but its
group_leader pointer is left pointing at the old leader.
That is harmless when the sibling is being closed and freed immediately, as
in the DETACH_DEAD path. It is not safe when the sibling is detached but
kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the
sibling is removed from the context, while its file descriptor can still
keep it alive.
A typical failing sequence is:
- A group contains leader L and sibling S.
- CPU hot-unplug detaches S with DETACH_GROUP, removing it from
L->sibling_list but leaving S->group_leader == L.
- L is later closed and freed.
- A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and
dereferences the freed leader.
This was reproduced by running the perf event fuzzer, CPU hotplug, and a
stress workload concurrently:
Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb
CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT
pc : perf_ioctl+0x34c/0xc68
x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b
Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908)
Call trace:
perf_ioctl+0x34c/0xc68 (P)
__arm64_sys_ioctl+0xa0/0xf4
invoke_syscall+0x58/0xe4
el0_svc_common+0xa8/0xdc
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xc0
el0t_64_sync_handler+0x68/0xdc
el0t_64_sync+0x1c4/0x1c8
The fault happened in perf_ioctl(), where perf_event_for_each() follows
the stale group_leader pointer and perf_event_for_each_child() then
dereferences the freed leader's context.
Fix the use-after-free by promoting the detached sibling to a singleton.
Also fix __event_disable() cgroup accounting and event state change. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Remove buffer from list prior to unmap operation
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebt_nflog: pin the NFLOG backend
nf_log_unregister() runs after the per-net teardown so its final RCU
grace period also drains readers that obtained the logger from a per-net
binding. However, ebt_nflog passes an explicit ULOG log type to
nf_log_packet() without holding a reference on the selected logger module,
unlike the xt_NFLOG and nft_log frontends.
An ebtables nflog rule can therefore remain callable while nfnetlink_log
is unloaded. The resulting interleaving is:
CPU 0 CPU 1
nfnetlink_log_fini()
unregister_pernet_subsys()
kfree(nfnl_log_pernet(net))
ebt_nflog_tg()
nf_log_packet()
nfulnl_log_packet()
instance_lookup_get_rcu()
The global ULOG logger is still registered at this point, so CPU 1
dereferences the per-net state after CPU 0 has freed it. KASAN reported:
BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu
Read of size 8 at addr ff110001052e6210 by task poc/92
Call Trace:
instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log]
nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log]
nf_log_packet+0x204/0x300
ebt_nflog_tg+0x351/0x550
ebt_do_table+0xedf/0x22b0
Allocated by task 90:
__kmalloc_noprof+0x186/0x470
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
register_pernet_subsys+0x23/0x40
Freed by task 93:
kfree+0x131/0x3c0
ops_undo_list+0x3e3/0x700
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
nfnetlink_log_fini+0x34/0x450 [nfnetlink_log]
Acquire the ULOG logger module reference when an ebt_nflog rule is
validated and release it when the rule is destroyed. Request the NFLOG
backend for legacy callers when needed, matching xt_NFLOG. This prevents
module teardown until all ebt_nflog rules have stopped using the logger. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix netns reference imbalance in conntrack kfuncs
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject inline extents without valid headers
[BUG]
For a crafted btrfs image, the following KASAN can be triggered when
reading an inline lzo compressed file extent:
BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700
Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x70
print_report+0xd1/0x610
kasan_report+0xe0/0x110
__asan_report_load_n_noabort+0x13/0x20
lzo_decompress+0x57d/0x700
btrfs_decompress+0x140/0x1c0
uncompress_inline+0x147/0x1b0
btrfs_get_extent+0xb23/0x10a0
btrfs_do_readpage.constprop.0+0x538/0x1ac0
btrfs_readahead+0x32f/0x5f0
read_pages+0x16f/0x850
page_cache_ra_unbounded+0x296/0x490
do_page_cache_ra+0xd9/0x130
page_cache_sync_ra+0x3ee/0x6f0
filemap_get_pages+0x306/0x15c0
filemap_read+0x329/0xd00
btrfs_file_read_iter+0x1f8/0x2b0
vfs_read+0x4ef/0x720
ksys_read+0xf8/0x1d0
__x64_sys_read+0x71/0xb0
x64_sys_call+0x1ab0/0x1b70
do_syscall_64+0x61/0x470
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
[CAUSE]
For an inline lzo compressed file extent, there should always be one lzo
header, recording the total length of the compressed data, followed by
one segment header, recording the compressed lzo payload.
But if a crafted inline lzo compressed file extent contains only an lzo
header, without the segment header or payload, lzo_decompress() will
still try to read the segment header, causing a read beyond the item
boundary.
Furthermore if the inline lzo compressed file extent is the first item
of the leaf, it will be at the extent buffer boundary. The above
out-of-boundary read will go beyond the extent buffer boundary,
triggering the above KASAN report.
[FIX]
Validate the total length of the inlined lzo compressed file extent, to
make sure there is at least one LZO header and one segment header, and a
non-zero payload.
[ Rework the commit message to remove slop ] |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: avoid out-of-bounds write in ip_vs_nat_icmp
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: fix tx_hang_reset use-after-free on device removal
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: skip rehash for peers already removed from by_id
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip(). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.
A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register. |
| The Shuffle theme for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.8. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The Verdure Core plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.2. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The Total Donations plugin for WordPress is vulnerable to SQL Injection in all versions up to, and including, 2.0.5 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The NotificationX Pro plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 3.1.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: The endpoint is public on purpose and the invitation code is the credential. This is the standalone SDK onboarding path for mobile apps that have no backend of their own: a developer generates a code via the authenticated dashboard endpoint, the user types it into the app, and it's redeemed for SDK-scoped tokens. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: reset the MAC header on the packet-socket transmit path
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f90c ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f90c. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: stop estimator after disabled calc phase
IPVS estimator kthread 0 starts with zeroed chain and tick limits until
its initial calculation phase completes. If network namespace teardown
clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return
without installing positive limits.
The kthread can then continue into its main loop and drain
est_temp_list with zero chain_max, tick_max and est_max_count values.
Each enqueue consumes one available tick row, but est_count never
reaches the zero est_max_count value. After all rows are consumed, the
row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes
past the ticks and tick_len arrays.
Exit kthread 0 after the calculation phase if the kthread is stopping or
IPVS has been disabled. That keeps temporary estimators from being
drained after the limits failed to initialize.
Estimator kthreads can now self-exit before teardown or reload stops
kd->task. Keep an extra task reference after creation and release it
with kthread_stop_put(), so kd->task remains valid until the stop paths
consume that reference. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup()
When the interface has NETIF_F_SG enabled and skb_linearize() fails in
ax88179_tx_fixup(), the function returns NULL without freeing the skb.
usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop
(info->flags does not set FLAG_MULTI_PACKET for this driver), jumping
to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`.
Because tx_fixup() returned NULL, the local skb variable in
usbnet_start_xmit() is NULL, so the original skb is never freed — a
memory leak on every TX frame whose linearization fails (i.e. under
memory pressure).
Free the skb before returning, matching the error handling already used
for the pskb_expand_head() failure path in the same function. |
